Install
Videos!

Sprocket Drum & Bearing Assemb - 000998263:Homelite 360 View

Watch The
Repair Video

Sprocket Drum & Bearing Assemb - 000998263:Homelite

Sprocket Drum & Bearing Assemb 000998263

Part Number: 000998263

8 Reviews

Leaves our warehouse within
7 - 12 business days

Questions & Answers

Repair Instructions

*This part replaces obsolete part #: UP06967A and UP06967.

Product Information

Description:

This is a Genuine Manufacturer Sourced replacement part designed for use with Homelite Chainsaws. This part is made out of metal and in this assembly it includes One (1) Sprocket Drum, One (1) Bearing and a Single (1) C-Clip.

When replacing this part on a Chainsaw you would need a Socket Wrench Set, Flat-Head Screwdriver and a Hammer.

Disassembling the Chainsaw:
• Remove the chain brake, bar, and chain.
• Remove the cover and spark plug.
• Bind the piston.
• Remove the clutch.

Reassembling the Saw:
• Replace the sprocket and clutch drum.
• Seat the clutch.
• Unbind the piston.
• Replace the bar, chain, and chain brake.
• Tension the chain.

Warning: California's Proposition 65

Frequently Purchased With

Cupped Washer..
$4.99

Guide Bar Plat..
$5.19

E-ring
$5.19

Needle Bearing..
$5.32

Compatibility

This part is compatible with the following machines:

Homelite

Expand the 150+ compatible machines

Products Compatibility

This item works with the following types of products:

• Chain Saw
• Saw

Questions & Answers for Sprocket Drum & Bearing Assemb

Sort by

My current clutch drum has 7 teeth. With this drum with 6 teeth work?

Richard for model number UT-10805 asked on 2023-05-09

Hello Richard, thank you for writing. The model UT-10805 shows the clutch 000998263. Yes, it will work. We are pleased to have been able to help.

Looks like plastic, my original is metal. Will this work?

George for model number D3300 asked on 2023-03-08

Hello George, Thank you for contacting us. We have researched the model you have provided and have found the part you are looking for is Part Number: 000998263. This part is made out of metal and in this assembly it includes One (1) Sprocket Drum, One (1) Bearing and a Single (1) C-Clip. Thank you for the inquiry, good luck with the repair!

Repair Instructions: Submitted by Customers Like You

4 of 5 people found this instruction helpful

Tool Type:

Chain Saw

Parts Used:

Sprocket Drum & Bearing Assemb - 000998263

Repair Difficulty:

Easy

Time Spent Repairing:

Less than 15 minutes

Tools Used:

Screwdriver, Pliers, Nutdriver

Sprocket bearing was bad

Removed sprocket cover,bar and chain. Removed clip that holds sprocket on shaft and the sprocket. Cleaned clutch and installed new sprocket and clip. Reinstalled bar,chain and cover. Easy fix and works great

Did you find this story helpful?

Thanks for voting and helping fellow customers!

2 of 2 people found this instruction helpful

Tool Type:

Chain Saw

Parts Used:

Sprocket Drum & Bearing Assemb - 000998263

Repair Difficulty:

Easy

Time Spent Repairing:

Less than 15 minutes

Tools Used:

Screwdriver, Socket set, Wrench Set

Play in sprocket drum bearing assembly

1. Removed cover, chain, and bearing assembly.
2. Cleaned equipment.
3. Placed new sprocket drum bearing assembly, washer, e-clip, bar and chain.
4. Placed cover and tightened chain.

Did you find this story helpful?

Thanks for voting and helping fellow customers!

1 of 1 people found this instruction helpful

Tool Type:

Chain Saw

Parts Used:

Sprocket Drum & Bearing Assemb - 000998263

Repair Difficulty:

Easy

Time Spent Repairing:

Less than 15 minutes

Tools Used:

Screwdriver

Chain drive sprocket was wrong

Removed chain.
Remove half moon clip.
Slide off sprocket.
Reinstall.

Did you find this story helpful?

Thanks for voting and helping fellow customers!

1 of 1 people found this instruction helpful

Tool Type:

Chain Saw

Parts Used:

Sprocket Drum & Bearing Assemb - 000998263

Screw, Thread Form (6-19 X 1/2 - 82513

Repair Difficulty:

Medium

Time Spent Repairing:

30-60 minutes

Tools Used:

Screwdriver, Pliers, Wrench Set

Replaced sprocket drum on Homelite chainsaw

Removed chain guard,chain and bar with wrench set
Used pliers and flat screw driver to remove "C" ring in middle of sprocket
Remove cup separator
Removed sprocket assembly
Replaced with new sprocket assembly
Replaced cup separator
Replaced :"C" ring with pliers
Replaced bar ,chain, and chain guard with wrench set
Tightened chain and started machine

Did you find this story helpful?

Thanks for voting and helping fellow customers!

1 of 1 people found this instruction helpful

Tool Type:

Chain Saw

Parts Used:

Sprocket Drum & Bearing Assemb - 000998263

Repair Difficulty:

Easy

Time Spent Repairing:

Less than 15 minutes

Tools Used:

Screwdriver, Nutdriver

The drive gear had a bad groves worn in it

Remove side panel holding the bar and chain. Next use screwdriver to remove "C" clip, remove chain and bar. Pick off the worn sprocket and drop on the new one. Reinstall the washer and the "C" clip bar and chain. Then the side cover, adjust chain tension and tighten side cover. Your done, very simple.

Did you find this story helpful?

Thanks for voting and helping fellow customers!

Tool Type:

Chain Saw

Parts Used:

Sprocket Drum & Bearing Assemb - 000998263

Repair Difficulty:

Easy

Time Spent Repairing:

Less than 15 minutes

Tools Used:

Wrench Set

worn sprocket

Remove cutter bar, remove E-ring remove sprocket, reverse to assemble

Did you find this story helpful?

Thanks for voting and helping fellow customers!

Tool Type:

Chain Saw

Parts Used:

Guide Bar Plate - 631036001

Valve- Duckbill - 560955001

Sprocket Drum & Bearing Assemb - 000998263

Element- Filter- Bronze - 671088001

Repair Difficulty:

Easy

Time Spent Repairing:

1-2 hours

Tools Used:

Screwdriver, Pliers, Specialty chainsaw nut tool

Chain drive gear bad, oil line plugged

Removed cover to chain
Removed drive gear clip and pull gear off
Drained oil tank
Flushed oil tank
Air blew out oil delivery line
Flush oil delivery line, brass filter and duck bill were fine; did not install. Kept those parts for another time.
Reassemble bar and chain and install cover.
Oiled added to oil tank.
Service completed

Did you find this story helpful?

Thanks for voting and helping fellow customers!

Tool Type:

Chain Saw

Parts Used:

Cupped Washer - 631060001

Sprocket Drum & Bearing Assemb - 000998263

E-ring - 08981

Repair Difficulty:

Easy

Time Spent Repairing:

Less than 15 minutes

Tools Used:

Screwdriver, Socket set

sprocket broke

removed e- ring washer and old sprocket drum installed new

Did you find this story helpful?

Thanks for voting and helping fellow customers!

Tool Type:

Chain Saw

Parts Used:

Sprocket Drum & Bearing Assemb - 000998263

Repair Difficulty:

Easy

Time Spent Repairing:

15-30 minutes

Tools Used:

Screwdriver, Pliers

Sprocket and bearing worn out.

1. Remove chain bar cover.
2. Remove guide bar plate.
3. Remove bar and chain.
4. Clean this area of sawdust.
5. Use screwdriver to pry off C-clip on sprocket.
6. Remove cup washer and slide sprocket off shaft.
7. Decrease new sprocket where it will contact clutch surfaces.
8. Pack sprocket bearing with heavy bearing grease.
9. Slide new sprocket onto shaft plus cup washer.
10. Put C-clip back on shaft using pliers to snap clip in place.
11. Reassemble bar, chain and guidebar plate plus cover.

Did you find this story helpful?

Thanks for voting and helping fellow customers!

Tool Type:

Chain Saw

Parts Used:

Sprocket Drum & Bearing Assemb - 000998263

Repair Difficulty:

Medium

Time Spent Repairing:

Less than 15 minutes

Tools Used:

Screwdriver, Wrench Set

Sprocket on drum was stripped and no longer moving the chain

Removed 2 chainsaw bar nuts to remove chain and bar
Use screwdriver to remove clip and washer holding on drum
Remove old drum
Put replacement drum on where old drum was removed
Add washer
Re-install clip using screwdriver
Install bar
Install chain
Install cover
Install 2 nuts and tighten

Did you find this story helpful?

Thanks for voting and helping fellow customers!

Reviews

Average Rating (out of 5):

8 Reviews

Click to filter by ratings:

5 stars

4 stars

3 stars

2 stars

1 stars

Sort by:

Highest Rating
Most Recent

< PREV

NEXT >

just what i was looking for

i have ordered many parts from places but i have found that ordering from ereplacementparts is the best way to go all around thank you very much for my hassle free parts ordering looking forward to my next purchase

Guest - June 6, 2022 Verified Purchase

Great part and fast delivery easy instructions will order again when needed

Quality part assembled as indicated

Guest - May 25, 2020 Verified Purchase

Matching Sprocket

Inadvertently bought the wrong pitch chain from a major retailer. Found the perfect matched sprocket here!

Guest - November 23, 2019 Verified Purchase

Fast, fit

Worked, painless

Timothy - September 30, 2019 Verified Purchase

Great service

The part was reasonably priced, the order was easy, and it arrived quickly.

Guest - September 4, 2019 Verified Purchase

Quick fix for the old homelite

Bearings in the sprocket fell apart on my old homelite. Part came fast and is built well. Has it up and running in no time.

Don - September 4, 2019 Verified Purchase

Easy Repair

My old sprocket was worn out. The homelite chainsaw that I have is about 20 years old. Thanks to you, I have a working chainsaw.

Donald - July 22, 2019 Verified Purchase

Sorry , I ordered the wrong part.

Part looks great but just not for my saw

Clyde - August 7, 2019 Verified Purchase

Verified Purchase

eReplacementParts Team

Sort by:

Highest Rating
Most Recent

< PREV

NEXT >

Product Information