eReplacementParts.com
866-322-9842
MK Diamond Parts
Repair Parts Home  Power Tool Parts  MK Diamond Parts  160310 Splash Guard
photo thumbnailphoto thumbnail360 degree photo thumbnail

Splash Guard

Part Number: 160310
MK Diamond
Availability: 7 in stock
Price: $4.79
Quantity:
Order within the next 8 hours
and your part ships today!

*This part replaces obsolete part #: and 152417.

Product Information
Manufacturer: MK Diamond
Product Number: 160310
Classification: Part
Weight: 0.07 lbs.
Shipping: Ships Worldwide
Description:
This part is an original MK Diamond product that has been OEM sourced to be used with wet tile, concrete, and masonry cutting saws. The plastic splash guard is used to prevent water from exiting the front of the table on tile or masonry saws, and to prevent water from splashing out of the blade guard of concrete saws. This item may require a screwdriver to install and is sold as an individual part.
Compatibility

This part is compatible with the following machines:

MK Diamond
Expand the 61 compatible machines
Products Compatibility

This item works with the following types of products:

  • • Concrete Saw
  • • Saw
  • • Tile Saw
Questions & Answers

No questions have been asked yet
Repair Instructions: Submitted by Customers Like You
1 of 1 people found this instruction helpful
Tool Type:
Tile Saw
Parts Used:
Splash Guard - 160310
Repair Difficulty:
Easy
Time Spent Repairing:
Less than 15 minutes
Tools Used:
, Hand (wing nut)
Updated splash guard
1. Removed wing nut holding old splash guard
2. Removed old splash guard
3. Installed new splash guard
4. Reinstalled wing nut for new splash guard
Did you find this story helpful?
Thanks for voting and helping fellow customers!
Tool Type:
Tile Saw
Parts Used:
Multilube Bearing - 152227
Splash Guard - 160310
Repair Difficulty:
Easy
Time Spent Repairing:
30-60 minutes
Tools Used:
Power Drill, Socket set, 1/4-20 tap and twist drill/ C Clamp/ square
Guides for sliding table warn out. Splash guard missing
Did you find this story helpful?
Thanks for voting and helping fellow customers!
Tool Type:
Tile Saw
Parts Used:
Splash Guard - 160310
Repair Difficulty:
Easy
Time Spent Repairing:
Less than 15 minutes
Tools Used:
Screwdriver
Missing splash guard
It's an easy fix. What took me longer than expected was the screw holding the splash guard on was missing and I needed to find one that fit.
Did you find this story helpful?
Thanks for voting and helping fellow customers!
Tool Type:
Tile Saw
Parts Used:
Wing-Screw, 1/4-20 X 1/2 - 151888
Splash Guard - 160310
Repair Difficulty:
Medium
Time Spent Repairing:
15-30 minutes
Tools Used:
Power Drill, 1/4\\
Old wing screw was broke off
Drill & tap old mounting screw, before I could mount the new splash guard.
Did you find this story helpful?
Thanks for voting and helping fellow customers!
Tool Type:
Tile Saw
Parts Used:
Wing-Screw, 1/4-20 X 1/2 - 151888
Wing-Nut, 5/16-18 Nylock - 151746
Roller Wheel - 151799
Multilube Bearing - 152227
Splash Guard - 160310
Ball Bearing - 137711
Bumper, 1/2 Dia Rubber - 152674
Repair Difficulty:
Medium
Time Spent Repairing:
More than 2 hours
Tools Used:
Screwdriver, Pliers, Socket set, Wrench Set, Adjustable Wrench
Refurbish MK 101 tile saw
Used 3 jaw puller to remove old bearings. Cleaned the shaft with emery paper and used rubber mallet to install new bearings.
Did you find this story helpful?
Thanks for voting and helping fellow customers!
Tool Type:
Tile Saw
Parts Used:
Plug, Water Drain - 159529
Multilube Bearing - 152227
Splash Guard - 160310
Blade, MK-100, 10 X 060 X 5/8 - 154380
Repair Difficulty:
Medium
Time Spent Repairing:
30-60 minutes
Tools Used:
Screwdriver, Adjustable Wrench, WD40
Plate would not slide smoothly which caused tile to cut unevenly
Took apart arm that operates plate that holds tile and replaced bearings, cleaned bar.
Did you find this story helpful?
Thanks for voting and helping fellow customers!
0 of 1 people found this instruction helpful
Tool Type:
Tile Saw
Parts Used:
Splash Guard - 160310
Repair Difficulty:
Easy
Time Spent Repairing:
Less than 15 minutes
Tools Used:
Old splash guard was ripped.
Replaced the splash guard with a wing nut and a washer screw in the saw.
Did you find this story helpful?
Thanks for voting and helping fellow customers!
Discussion
Discussion for Splash Guard - ( 160310 )
Discussion is closed. To ask our experts a question about a part, use the Q&A feature.
Question: Mk 100 Wet Saw

hayescf

Does the splash guard come with or need any mounting hardware. If so, how do I order it.
WJA
Hello hayescf,

Along with the 160310 Splash Guard. You will need part number 151915 Washer and part number 151888 Wing-Screw. These will mount on the back of the guard.

-WJA
Product Information
Manufacturer: MK Diamond
Product Number: 160310
Classification: Part
Weight: 0.07 lbs.
Shipping: Ships Worldwide
Related Products
eReplacementParts.com
7036 South High Tech Dr.
Midvale, UT 84047
visa mastercard discover american express PayPal

fancyboxy