Easy
15-30 minutes
This is a genuine part that is supplied by the original manufacturer for use with Husqvarna hedge trimmers and blowers. The module kit produces the voltage that travels down the spark plug wire to the spark plug, then to the engine. This part is made of metal and plastic it is also sold individually. For installation you will need a screwdriver, a socket wrench and a pair of pliers to aid you. Before starting this repair be sure to let the engine cool completely.
Spark Plug 531008614
OEM part for: Husqvarna
Part Number: 531008614
$12.44
In Stock
Ships within 1 business day 
Jump To:
Frequently Purchased Together ?
Compatibility
This part will fit the following 12 machines
Husqvarna
324 HDA 55x (2005-09) Blower View Diagrams & Manuals
324 HDA 55X (2004-05) Hedge Trimmer View Diagrams & Manuals
324RX (2004-05) Brushcutter View Diagrams & Manuals
224L (2009-06) Trimmer View Diagrams & Manuals
524 R Brushcutter View Diagrams & Manuals
324 HDA55 X-SERIES (2005-09) Hedge Trimmer View Diagrams & Manuals
324 HDA55 X-SERIES (2004-05) Hedge Trimmer View Diagrams & Manuals
524 LK Trimmer View Diagrams & Manuals
324 L Trimmer View Diagrams & Manuals
324 LDX Trimmer View Diagrams & Manuals
324 LX (2004-05) Trimmer View Diagrams & Manuals
324 HDA55 (20041800001-20053600000) X-Series Pole Hedge Trimmer View Diagrams & Manuals
Show More Compatible Models
This item works with the following types of products:
- Blower Parts
- Hedge Trimmer Parts
- Trimmer Parts
Questions & Answers ?
Our customer Service team is at the ready daily to answer your part and product questions.
Ask our Team
We have a dedicated staff with decades of collective experience in helping customers just like you purchase parts to repair their products.
Does this fit my product?Questions & Answers for Spark Plug
No questions have been asked yet
Customer Repair Instructions ?
All our customer repair instructions are solicited directly from other customers just like you who have purchased and replaced this exact part.
Would shut off under load. Not getting fuel
Bradley - August 14, 2017
👍 1 of 1 people found this instruction helpful
Tool Type
Trimmer
Difficulty
Easy
Time
15-30 minutes
Tools Used
Pliers, Socket set
1. Changed spark plug, set the gap at 0.025
2. Fished the fuel line out of the tank with hook at the end of wire.
3. Changed fuel filter.
4. Removed the air filter cover and replaced the air filter
2. Fished the fuel line out of the tank with hook at the end of wire.
3. Changed fuel filter.
4. Removed the air filter cover and replaced the air filter
Did you find this story helpful?
Thanks for voting and helping fellow customers!
Starter rope would not rewind all the way, and hard starting also air filter was crumbling
Darryl - July 31, 2017
Tool Type
Trimmer
Difficulty
Easy
Time
15-30 minutes
Tools Used
Screwdriver, Allen wrench
Removed air cleaner cover.
Removed wire clipped to engine cover by removing allen headed bolt.
Removed starter buy removing 3 allen bolts.
Flipped engine over
Removed plug wire
Removed the spark plug
Turned the trimmer upside down to allow access to engine the pan to align motor mounting pins.
Inserted bushing
Placed starter on engine flipped device over
Replaced spark plug
Replaced plug wire ensuring the plug is contacted
Replaced top engine cover
Clipped control wire back to cover
Removed the air filter cover
Inserted the new air filter and replaced the cover
Tighten all allen headed bolts to spec.
Removed wire clipped to engine cover by removing allen headed bolt.
Removed starter buy removing 3 allen bolts.
Flipped engine over
Removed plug wire
Removed the spark plug
Turned the trimmer upside down to allow access to engine the pan to align motor mounting pins.
Inserted bushing
Placed starter on engine flipped device over
Replaced spark plug
Replaced plug wire ensuring the plug is contacted
Replaced top engine cover
Clipped control wire back to cover
Removed the air filter cover
Inserted the new air filter and replaced the cover
Tighten all allen headed bolts to spec.
Did you find this story helpful?
Thanks for voting and helping fellow customers!
Choke would not hold it's position and hard to start
Richard - August 1, 2016
Tool Type
Trimmer
Difficulty
Easy
Time
15-30 minutes
Tools Used
Socket set
1. Removed holder plate containing the choke assembly and replaced using 10mm socket.
2. Replaced air filter
3. Replaced spark plug
2. Replaced air filter
3. Replaced spark plug
Did you find this story helpful?
Thanks for voting and helping fellow customers!
OEM stands for Original Equipment Manufacturer and means the part you’re buying is sourced directly from the manufacturer who made your product. At eReplacementParts, we sell only genuine OEM parts, guaranteeing the part you’re purchasing is of better design and of higher quality than aftermarket parts.
Our product descriptions are a combination of data sourced directly from the manufacturers who made your product as well as content researched and curated by our content & customer service teams. This content is edited and reviewed internally before being made public to customers.
Our customer service team are at the ready daily to answer your part and product questions. We have a dedicated staff with decades of collective experience in helping customers just like you purchase parts to repair their products.
All our part reviews are solicited directly from other customers who have purchased this exact part. While we moderate these reviews for profanity, offensive language or personally identifiable information, these reviews are posted exactly as submitted and no alterations are made by our team.
All our customer repair instructions are solicited directly from other customers just like you who have purchased and replaced this exact part. While we moderate these reviews for profanity, offensive language or personally identifiable information, these reviews are posted exactly as submitted and no alterations are made by our team.
Based on data from past customer purchasing behaviors, these parts are most commonly purchased together along with the part you are viewing. These parts may be necessary or helpful to replace to complete your current repair.
All our installation videos are created and produced in collaboration with our in-house repair technician, Mark Sodja, who has helped millions of eReplacementParts customers over the last 13 years repair their products. Mark has years of experience in selling and repairing both commercial and residential products with a specialty in gas-powered equipment.
This data is collected from customers who submitted a repair instruction after replacing this exact part. Customers can rate how easy the repair was to complete and how long it took. We aggregate this data to provide a repair rating that allows customers to quickly determine the difficulty and time needed to perform their own repair.
