eReplacementParts.com
877-346-4814
Shindaiwa Parts

Spark Plug 15901019830

OEM part for: Echo, Shindaiwa

Part Number: 15901019830


Install
Videos!
Grid squares measure 1x1 inch
Spark Plug - 15901019830:EchoSpark Plug - 15901019830:Echo
In Stock
Order within the next 6 hours and your part ships today!
Easy 15-30 minutes (55 rated repairs)?
OEM: Original Equipment Manufacturer ?
Echo Little Wonder Shindaiwa

Product Description ?

This is an OEM replacement part and is sold individually.
Its propose is to deliver an electric current from an ignition system to the combustion chamber of a gas fueled engine.
It will ignite the air fuel mixture by the spark.
Spark Plugs will usually have to gapped to the manufactures specifications found in the owners manual.

Over time a Spark Plug will become fouled because the air/fuel ratio may be set wrong,worn piston rings, carbon build up and other factors.
It is better to replace a fouled spark plug, rather then trying to clean it.

  • Bpm-8Y 2057
  • Classification: Part
  • Weight: 0.04 lbs.
  • Also Known As: Flame Igniter
  • Shipping: Ships Worldwide

Compatibility

This is the official OEM part for the following brands:

  • Echo
  • Little Wonder
  • Shindaiwa

This item works with the following types of products:

  • Blower
  • Chain Saw
  • Cultivator
  • Drill
  • Edger
  • Engine
  • Generator
  • Grass Trimmer
  • Hedge Trimmer
  • Paint Sprayer
  • Pruner
  • Pump
  • Saw
  • Trimmer
  • Vacuum

This part replaces obsolete part #: 1591019830, Y16052078010

Repair Videos ?

Watch the Repair Video for Spark Plug
Articles:
Step-by-step instructions for removing and installing the spark plug on an Echo SRM-225 trimmer....
May 27, 2015
Filthy Filters? This article will show you how to install a filter kit on an Echo SRM-225 trimmer....
May 27, 2015

Customer Part Reviews ?

5
Average Rating (out of 5):
23 Reviews
Click to filter by ratings:
5 stars
22
4 stars
1
3 stars
0
2 stars
0
1 stars
0
  • Highest Rating
  • Most Recent
< PREV
  • 1
  • 2
  • 3
NEXT >
  • Homeower
    All parts were exact , worked out great
    Guest - August 21, 2024 Verified Purchase
    Repair parts
    Was great to get parts and never leave the house. The parts are right and with quick response.
    Ken - December 29, 2023 Verified Purchase
    Factory quality parts
    I purchase a primer ball an air filter and a spark plug for my chain saw which wouldn't start. I installed the parts which fit perfect added some new gas and oil and the saw started and ran perfect.
    Guest - June 1, 2023 Verified Purchase
    Echo parts
    Got the correct parts, Arrived Quickly. the website is very easy to navigate and find what you are looking for.
    Guest - May 31, 2023 Verified Purchase
    Weed walker clutch and spark plug
    Perfect fit. Works great again.
    Guest - May 3, 2023 Verified Purchase
    Good service
    Good service prompt
    Guest - April 22, 2023 Verified Purchase
    Easy swap
    Exact part the mfg recommends the gap was factory set at correct gap. I checked it anyway to make sure. East swap out and repaired my problem for low cost.
    Guest - November 11, 2022 Verified Purchase
    worked GREAT......Thanks, Great Service
    Worked as promised. Thanks Again for the Great service
    John - July 21, 2022 Verified Purchase
    As expected
    It was a spark plug.
    Guest - May 24, 2022 Verified Purchase
    Quick Delivery at good prices.
    Quick delivery of spark plub along with air filter, fuel filter and fuel tank cap. Backpack blower runs as good as new.
    Benjamin - December 3, 2021 Verified Purchase

    Questions & Answers ?

    Our customer Service team is at the ready daily to answer your part and product questions.

    photo of team member
    Ask our Team

    We have a dedicated staff with decades of collective experience in helping customers just like you purchase parts to repair their products.

    Does this fit my product?

    Questions & Answers for Spark Plug


    What is the gap for the spark plug
    John for model number Echo 200r asked on 2023-05-13
    Hello John, Thank you for your inquiry. We show the spark plug gap as 0.65 mm. We hope this helps.
    eReplacementParts Team May 13, 2023

    Customer Repair Instructions ?

    All our customer repair instructions are solicited directly from other customers just like you who have purchased and replaced this exact part.

    Easy 15-30 minutes (55 rated repairs)?

    Fuel filter dirty and spark plug needed to be changed

    Bill - April 27, 2016
    👍 18 of 19 people found this instruction helpful
    Tool Type

    Blower

    Difficulty

    Easy

    Time

    15-30 minutes

    Tools Used

    Socket set

    Easy to follow instructions on the Video you supplied on your website. It was hard to start and loss of power solved. Replaced the spark plug and gapped it at .026
    Did you find this story helpful?
    Thanks for voting and helping fellow customers!

    Blower Needed a Tune UP

    Daniel - August 9, 2017
    👍 4 of 4 people found this instruction helpful
    Tool Type

    Blower

    Difficulty

    Easy

    Time

    Less than 15 minutes

    Tools Used

    Socket set

    1. Replaced the fuel and air filters followed by replacing the spark plug. Accomplished in minutes.
    2. Remembered to empty the fuel prior to replacing the fuel filter. Made a hook at the end of a coat hanger cut straight, fished the fuel filter out and exchanged it with the new one.
    3. Painless and very easy to do.
    Did you find this story helpful?
    Thanks for voting and helping fellow customers!

    Would idle but would not increase speed

    Gerry - September 2, 2017
    👍 3 of 4 people found this instruction helpful
    Tool Type

    Blower

    Difficulty

    Easy

    Time

    15-30 minutes

    Tools Used

    Socket set

    Made a hook out of a wire, then fished the fuel line from the tank and removed the old fuel filter and installed the new one, then placed it in the fuel tank. Removed the old fuel tank vent and replaced it with a new one on. Removed the air filter cover, then the old filter and replaced it with the new one. Removed the old spark plug and gapped the new one at 0.025 and installed it.
    Did you find this story helpful?
    Thanks for voting and helping fellow customers!

    Fuel leak, hard to start (floods)

    Jeff - July 25, 2017
    👍 2 of 3 people found this instruction helpful
    Tool Type

    Blower

    Difficulty

    Easy

    Time

    15-30 minutes

    Tools Used

    Screwdriver

    Remove the carburetor from the blower engine, disassemble it installed carb kit.
    Remove the old spark plug and install the new spark plug.
    Remove the air filter cover and install the new filter
    Did you find this story helpful?
    Thanks for voting and helping fellow customers!

    Would not start

    David - October 31, 2018
    Took carburetor apart, cleaned, assembled new parts and started right up//// had considered buying a new weed eater but realized how easy it was to rebuild the old one and saved a lot of money. Also you can you tube it to see exactly how to repair it and what to look for. I have ordered from replacement parts and always got my order quickly and correct. Thanks, David
    Did you find this story helpful?
    Thanks for voting and helping fellow customers!

    Blower/vac would start and immediately cut out.

    Nancy - July 7, 2018
    Tool Type

    Blower

    Difficulty

    Easy

    Time

    15-30 minutes

    Tools Used

    Socket set, Wire hook

    Watched the video on tune-up and followed the instructions. Very easy and helpful. Saved a
    lot of money. .Awesome straight-forward video let me know I could tackle
    this myself. Just need right socket wrench for the spark plug. Thank you for making this
    easy.
    Did you find this story helpful?
    Thanks for voting and helping fellow customers!

    Blower would not start & fuel line was broken

    Guy - June 4, 2018
    Tool Type

    Blower

    Difficulty

    Easy

    Time

    15-30 minutes

    Tools Used

    Screwdriver, Pliers, Socket set

    Repaced these specific parts according to the directions in the product manual. Once complete the blower started up after a few pulls.
    Did you find this story helpful?
    Thanks for voting and helping fellow customers!

    Back pack blower would not start.

    Marta - May 25, 2018
    Tool Type

    Blower

    Difficulty

    Easy

    Time

    30-60 minutes

    Tools Used

    Screwdriver, Socket set

    Checked compression- good.
    Checked spark - good.
    Removed carburetor.
    Ordered diaphragm kit on e-replacement.
    Order arrived in a few days.
    Installed new diaphragm and gaskets in carburetor.
    Only required a screwdriver.
    Reinstalled carburetor.
    Started and ran great.
    Empty fuel before removing carburetor.
    Take pictures so you can reassemble correctly.
    Easy!
    Did you find this story helpful?
    Thanks for voting and helping fellow customers!

    The chainsaw needed a tuneup.

    Mark - March 29, 2018
    Tool Type

    Chain Saw

    Difficulty

    Medium

    Time

    30-60 minutes

    Tools Used

    Screwdriver, Pliers, Socket set

    Removed the old fuel filter, the air filter and the spark plug.
    Did you find this story helpful?
    Thanks for voting and helping fellow customers!

    Fuel leaking from fuel line grommet on fuel tank.

    Reeves - March 26, 2018
    1. Flipped choke to cold start & removed air filter cover and filter.
    2. Removed primer bulb to access fuel line and return line.
    3. Pulled fuel filter out of tank with hook end of a coat hanger (high tech, right?) & removed filter.
    4. Disconnected fuel & return line and removed grommet with lines as an assembly.
    5. Installed new fuel filter on new fuel line.
    6. Put a light coat of motor oil on both lines to help slide through new grommet.
    7. Lightly coated grommet with motor oil, inserted grommet with fuel lines/filter attached into fuel tank opening.
    8. Install fuel line and return line, primer bulb, air filter, and filter cover.

    Pressed prime bulb, pulled starter rope and check for leaks. Everything checked out ok. Problem solved 👍🏼
    Did you find this story helpful?
    Thanks for voting and helping fellow customers!

    OEM stands for Original Equipment Manufacturer and means the part you’re buying is sourced directly from the manufacturer who made your product. At eReplacementParts, we sell only genuine OEM parts, guaranteeing the part you’re purchasing is of better design and of higher quality than aftermarket parts.

    Learn More

    Our product descriptions are a combination of data sourced directly from the manufacturers who made your product as well as content researched and curated by our content & customer service teams. This content is edited and reviewed internally before being made public to customers.

    Our customer service team are at the ready daily to answer your part and product questions. We have a dedicated staff with decades of collective experience in helping customers just like you purchase parts to repair their products.

    All our part reviews are solicited directly from other customers who have purchased this exact part. While we moderate these reviews for profanity, offensive language or personally identifiable information, these reviews are posted exactly as submitted and no alterations are made by our team.

    All our customer repair instructions are solicited directly from other customers just like you who have purchased and replaced this exact part. While we moderate these reviews for profanity, offensive language or personally identifiable information, these reviews are posted exactly as submitted and no alterations are made by our team.

    Based on data from past customer purchasing behaviors, these parts are most commonly purchased together along with the part you are viewing. These parts may be necessary or helpful to replace to complete your current repair.

    All our installation videos are created and produced in collaboration with our in-house repair technician, Mark Sodja, who has helped millions of eReplacementParts customers over the last 13 years repair their products. Mark has years of experience in selling and repairing both commercial and residential products with a specialty in gas-powered equipment.

    This data is collected from customers who submitted a repair instruction after replacing this exact part. Customers can rate how easy the repair was to complete and how long it took. We aggregate this data to provide a repair rating that allows customers to quickly determine the difficulty and time needed to perform their own repair.

    eReplacementParts.com
    7174 South 400 West
    Suite 5
    Midvale, UT 84047
    visa mastercard discover american express PayPal
    Recent searches:
    Suggested searches:
    Models:
    Manufacturers:
    Need help finding your model number?