Watch The
Repair Video

Spark Plug Coil

Part Number: 15901103432

3 Reviews

Order within the next 5 hours

and your part ships today!

Questions & Answers

Repair Instructions

*This part replaces obsolete part #: 15901100510 and 15901103431.

Product Information

Manufacturer: Echo, Shindaiwa, Little Wonder

Product Number: 15901103432

Classification: Part

Weight: 0.01 lbs.

Shipping: Ships Worldwide

Description:

This genuine OEM sourced replacement part is designed for use with blowers/trimmers. This is the spring for the spark plug boot. This spring is made out of metal and it is sold individually.

Warning: California's Proposition 65

Compatibility

This part is compatible with the following machines:

Shindaiwa

DH212 (S78311001001 - S78311999999) Hedge Trimmer
DH212 (S78311001001 - S78311999999) Hedge Trimmer

EB212 (P02411001001-P02411999999) Power Blower
SV212 (P02611001001-P02611999999) Shredder Vac Blower

Echo

Expand the 150+ compatible machines

Products Compatibility

This item works with the following types of products:

• Blower
• Edger
• Hedge Trimmer
• Trimmer

Questions & Answers

Sort by

My saw was working fine and then just stopped.It turns ouy no spark ,i csn not figure out whst is wrong with it? Amy suggestions on where to dtart would be helpful thanx

curt for model number 550 EVL ECHO asked on 2019-03-04

Hi Curt, Thank you for your question. If your chainsaw will not start, there are some parts that you will need to check to see which one is causing the issue. You will need to check the spark plug coil, the spark plug, the spark plug cap, the fuel filter, the washer, the woodruff key, the grommet, the strainer, the ball bearing, the oil seal, the fuel pump gaskets and the diaphragm-fuel cap. I hope this helps. Thank you and have a great day!

1 person found this helpful.

Did this question help you?

Hello, I have an Echo CS 8000 and it just stopped working on me. I ran it most of the day, I shut it down and it has not started for 4 months. I have not changed the plug or coil yet. From what I have said, what do you think could be the culprit?

Hop for model number CS-8000 asked on 2019-11-14

Hi Hop, Thank you for your question. If the chainsaw will not start, there are some parts that you will need to check to see which one is causing the issue. You will need to check the spark plug coil, the fuel filter, the fuel tank vent, the spark plug, the spark plug cap, the fuel line clip, the washer, the ignition coil, the vent cover, the strainer, the fuel pump diaphragm, the fuel pump gasket, the grommet, the spring rewind and the metering diaphragm. I hope this helps. Thank you and have a great day!

Did this question help you?

Would this part be compatible for a Craftsman Chainsaw model # 271358240 possibly? I was able to get a recoil spring for a echo #1772203930 that is compatable for my Craftsman saw...just hoping, Thank you so much, Richard Brower

Richard for model number 1772203930 asked on 2019-10-05

Hello Richard and thank you for writing. Spark Plug Part Number: CJ8 is in the list of compatible items for your model. Hope this helps. Please contact us anytime.

Related Parts: Spark Plug Champion Cj8

Did this question help you?

echo power blower no spark @spark plug and what is the gap between flywheel and coil??

Dave for model number PB201 asked on 2019-06-12

Hello Dave, thank you for writing. We will also need the product or serial number for the unit, as there are multiple variations of the model listed using different Spark Plugs.

Did this question help you?

Repair Instructions: Submitted by Customers Like You

2 of 3 people found this instruction helpful

Tool Type:

Trimmer

Parts Used:

Spark Plug Cap - 15901201620

Spark Plug Coil - 15901103432

Tube-Insulator - 15611054930

Repair Difficulty:

Easy

Time Spent Repairing:

Less than 15 minutes

Tools Used:

Pliers

Spark plug cap was broken and arcing

Removed old broken spark plug cap and slid new cap and coil onto wire. Placed insulater over wire,

Did you find this story helpful?

Thanks for voting and helping fellow customers!

2 of 3 people found this instruction helpful

Tool Type:

Chain Saw

Parts Used:

Spark Plug Coil - 15901103432

Spark Plug Cap - 15901203433

Repair Difficulty:

Easy

Time Spent Repairing:

Less than 15 minutes

Tools Used:

Pliers, Dielectric grease

Spark plug wire would not stay on plug.

1. Removed the spark plug cap from the wire.
2. Removed the spark plug cap coil from the wire.
3. Replaced the spark plug cap coil, gave a squeeze with pliers.
4. Filled the end of the spark plug cap with a dielectric grease, easily slip the cap back on the wire.

Did you find this story helpful?

Thanks for voting and helping fellow customers!

Tool Type:

Blower

Parts Used:

Spark Plug Coil - 15901103432

Spark Plug Cap - 15901203433

Coil-Ignition - A040000030

Repair Difficulty:

Easy

Time Spent Repairing:

Less than 15 minutes

Tools Used:

Screwdriver, Pliers, Nutdriver

no spark on plug to start

removed the coil on the ignition
replaced it
went ahead and replaced plug cap
and clip

Did you find this story helpful?

Thanks for voting and helping fellow customers!

Tool Type:

Blower

Parts Used:

Spark Plug Coil - 15901103432

Spark Plug Cap - 15901203433

Coil, Ignition - A411001521

Repair Difficulty:

Easy

Time Spent Repairing:

30-60 minutes

Tools Used:

Screwdriver, Socket set

Engine misfire

1. Unbolted the engine cover
2. Unbolted the ignition coil
3. Bolted the new ignition coil (check for clearance and fit since the bolt holes are larger than the bolt itself. Otherwise, the ignition coil might scrape on the surrounding parts.)
4. Replace the engine cover

Did you find this story helpful?

Thanks for voting and helping fellow customers!

Tool Type:

Chain Saw

Parts Used:

Spark Plug Cap - 15901201620

Spark Plug Coil - 15901103432

Coil- Ignition - A411000182

Boot- Connector - C483000000

Repair Difficulty:

Easy

Time Spent Repairing:

30-60 minutes

Tools Used:

Screwdriver, Tox wrench

The coil was bad also replaced carb.

Removed top cover and starter cover removed the two bolts from coil removed spark plug wire. Replaced new coil set gap and starter cover. Removed air cleaner two carb bolts pulled carb off install new gasket two bolts air cleaner hooked up choke and throttle. Replaced top cover and was done . On line help was great saw ran great.

Did you find this story helpful?

Thanks for voting and helping fellow customers!

0 of 1 people found this instruction helpful

Tool Type:

Edger

Parts Used:

Spark Plug Coil - 15901103432

Repair Difficulty:

Easy

Time Spent Repairing:

15-30 minutes

Tools Used:

Screwdriver, Pliers

Spark plug wire faulty

Replaced spark plug wire boot on coil wire

Did you find this story helpful?

Thanks for voting and helping fellow customers!

Reviews

Average Rating (out of 5):

3 Reviews

Click to filter by ratings:

5 stars

4 stars

3 stars

2 stars

1 stars

Sort by:

Highest Rating
Most Recent

< PREV

NEXT >

very easy to use and order parts

my pole saw is working like new and its 15 years old

Guest - 5 days ago Verified Purchase

Echo Parts

My order arrived within a few days. The parts where original factory Echo parts for my weed eater. I couldn't of been happier. thanks for the good service

Guest - May 1, 2020 Verified Purchase