eReplacementParts.com
866-322-9842
Paramount Parts

Spark Plug

Part Number: 952030150
PoulanParamountWeed EaterHusqvarnaJonsered
Availability: 25+ in stock
Price: $5.64
Quantity:
Order within the next 4 hours
and your part ships today!

*This part replaces obsolete part #: 530003014, 503235111, 503235108, 530030075, 503235011, 501216607, 952030201, 30073, 952030037, 530030005, 952030078 and 530030073.

Product Information
Manufacturer: Poulan, Paramount, Weed Eater, Husqvarna, Jonsered
Product Number: 952030150
Classification: Part
Weight: 0.06 lbs.
Also Known As: Flame Igniter
Shipping: Ships Worldwide
Description:
This is a genuine Poulan replacement part, it is sold individually.
A spark plug is used to deliver electric current from an ignition system to an internal combustion engine.

After time spark plugs will become dirty or fouled.
It is a good idea to replace the spark plug once this happens.
You should gap your spark plug according to the owners manual of the outdoor product you have.

Compatibility

This part is compatible with the following machines:

Paramount
Poulan
1800 Gas Chain Saw
1800 Gas Chain Saw
1900 Gas Chain Saw
1900 Gas Chain Saw
1950 Type 1 Gas Chain Saw
1950 Type 1 Gas Chain Saw
1950 Type 2 Gas Chain Saw
1950 Type 2 Gas Chain Saw
1950 Type 3 Gas Chain Saw
1950 Type 3 Gas Chain Saw
1950 Type 4 Gas Chain Saw
1950 Type 4 Gas Chain Saw
1950 Type 5 Gas Chain Saw
1950 Type 5 Gas Chain Saw
1950 Type 6 Gas Chain Saw
1950 Type 6 Gas Chain Saw
1950 Type 7 Gas Chain Saw
1950 Type 7 Gas Chain Saw
1950LE Type 1 Gas Chain Saw
1950LE Type 1 Gas Chain Saw
1950LE Type 2 Gas Chain Saw
1950LE Type 2 Gas Chain Saw
1975 Type 1 Gas Chain Saw
1975 Type 1 Gas Chain Saw
1975 Type 2 Gas Chain Saw
1975 Type 2 Gas Chain Saw
1975 Type 3 Gas Chain Saw
1975 Type 3 Gas Chain Saw
1975 Type 4 Gas Chain Saw
1975 Type 4 Gas Chain Saw
1975 Type 5 Gas Chain Saw
1975 Type 5 Gas Chain Saw
1975 Type 6 Gas Chain Saw
1975 Type 6 Gas Chain Saw
1975 Type 7 Gas Chain Saw
1975 Type 7 Gas Chain Saw
1975LE Type 1 Gas Chain Saw
1975LE Type 1 Gas Chain Saw
1975LE Type 2 Gas Chain Saw
1975LE Type 2 Gas Chain Saw
20 Gas Chain Saw
20 Gas Chain Saw
2000 Gas Chain Saw
2000 Gas Chain Saw
2050 Type 1 Gas Chain Saw
2050 Type 1 Gas Chain Saw
2050 Type 2 Gas Chain Saw
2050 Type 2 Gas Chain Saw
2050 Type 3 Gas Chain Saw
2050 Type 3 Gas Chain Saw
2050 Type 4 Gas Chain Saw
2050 Type 4 Gas Chain Saw
2050 Type 5 Gas Chain Saw
2050 Type 5 Gas Chain Saw
2050 Type 6 Gas Chain Saw
2050 Type 6 Gas Chain Saw
2050 Type 7 Gas Chain Saw
2050 Type 7 Gas Chain Saw
2055 Type 1 Gas Chain Saw
2055 Type 1 Gas Chain Saw
2055 Type 2 Gas Chain Saw
2055 Type 2 Gas Chain Saw
2055 Type 3 Gas Chain Saw
2055 Type 3 Gas Chain Saw
2055 Type 4 Gas Chain Saw
2055 Type 4 Gas Chain Saw
2055 Type 5 Gas Chain Saw
2055 Type 5 Gas Chain Saw
2055 Type 6 Gas Chain Saw
2055 Type 6 Gas Chain Saw
2055 Type 7 Gas Chain Saw
2055 Type 7 Gas Chain Saw
2050LE Type 1 Gas Chain Saw
2050LE Type 1 Gas Chain Saw
2050LE Type 2 Gas Chain Saw
2050LE Type 2 Gas Chain Saw
2050WT Type 1 Gas Chain Saw
2050WT Type 1 Gas Chain Saw
2050WT Type 2 Gas Chain Saw
2050WT Type 2 Gas Chain Saw
2050WT Type 3 Gas Chain Saw
2050WT Type 3 Gas Chain Saw
2050WT Type 4 Gas Chain Saw
2050WT Type 4 Gas Chain Saw
2050WT Type 5 Gas Chain Saw
2050WT Type 5 Gas Chain Saw
2050WT Type 6 Gas Chain Saw
2050WT Type 6 Gas Chain Saw
2050WT Type 7 Gas Chain Saw
2050WT Type 7 Gas Chain Saw
2055LE Type 1 Gas Chain Saw
2055LE Type 1 Gas Chain Saw
2055LE Type 2 Gas Chain Saw
2055LE Type 2 Gas Chain Saw
2075 Type 1 Gas Chain Saw
2075 Type 1 Gas Chain Saw
2075 Type 2 Gas Chain Saw
2075 Type 2 Gas Chain Saw
2075 Type 3 Gas Chain Saw
2075 Type 3 Gas Chain Saw
2075 Type 4 Gas Chain Saw
2075 Type 4 Gas Chain Saw
2075 Type 5 Gas Chain Saw
2075 Type 5 Gas Chain Saw
2075 LE Gas Chain Saw
2075 LE Gas Chain Saw
2075C Type 1 Gas Chain Saw
2075C Type 1 Gas Chain Saw
2075C Type 2 Gas Chain Saw
2075C Type 2 Gas Chain Saw
2075C Type 3 Gas Chain Saw
2075C Type 3 Gas Chain Saw
2075C Type 4 Gas Chain Saw
2075C Type 4 Gas Chain Saw
2075C Type 5 Gas Chain Saw
2075C Type 5 Gas Chain Saw
2075OC Type 1 Gas Chain Saw
2075OC Type 1 Gas Chain Saw
2075OC Type 2 Gas Chain Saw
2075OC Type 2 Gas Chain Saw
2075OC Type 3 Gas Chain Saw
2075OC Type 3 Gas Chain Saw
2075OC Type 4 Gas Chain Saw
2075OC Type 4 Gas Chain Saw
2075OC Type 5 Gas Chain Saw
2075OC Type 5 Gas Chain Saw
20D Gas Chain Saw
20D Gas Chain Saw
2100 Gas Chain Saw
2100 Gas Chain Saw
2150 Type 1 Gas Chain Saw
2150 Type 1 Gas Chain Saw
2150 Type 2 Gas Chain Saw
2150 Type 2 Gas Chain Saw
2150 Type 3 Gas Chain Saw
2150 Type 3 Gas Chain Saw
2150 Type 4 Gas Chain Saw
2150 Type 4 Gas Chain Saw
2150 Type 5 Gas Chain Saw
2150 Type 5 Gas Chain Saw
2150 Type 6 Gas Chain Saw
2150 Type 6 Gas Chain Saw

Products Compatibility

This item works with the following types of products:

  • • Blower
  • • Chain Saw
  • • Hedge Trimmer
  • • Saw
  • • Trimmer
Questions & Answers

What is the gap for the spark plug?
Dean for model number FB25
Good Day Dean. Thank you for your question in regards to your unit (Model Number FB25). Based on our research the gap on this Spark Plug is 0.025. Hope this helps. Best Regards.
gas filter,purge bulb and spark plug can be used on your Prolink 335?
Gonzalo Cabra for model number Pouland Pro Link 335 weed trimmer
Hello Gonzales , Great question. The following parts are compatible with your model. 952030249 spark plug 530047721 purge bulb 530095646 filter fuel Hope this helps.
What is the spark plug gap recommended?
Frank for model number 2150PR
Hello Frank, Thank you for your question. The spark plug under part 952030150 is the correct one for your model. Hope this helps!
Repair Instructions: Submitted by Customers Like You
34 of 38 people found this instruction helpful
Tool Type:
Chain Saw
Parts Used:
Spark Plug - 952030150
Repair Difficulty:
Easy
Time Spent Repairing:
Less than 15 minutes
Tools Used:
Socket set, 5/8 Socket
Would start then it will shut off in awhile
I removed the boot and the old spark plug from the cylinder. Before I installed the new spark plug I gapped it 0.025
Did you find this story helpful?
Thanks for voting and helping fellow customers!
7 of 7 people found this instruction helpful
Tool Type:
Chain Saw
Parts Used:
Spark Plug - 952030150
Chain-20" - 952051310
Repair Difficulty:
Easy
Time Spent Repairing:
Less than 15 minutes
Tools Used:
Screwdriver, Socket set
Dull chain, needed replacing
Loosen the tension on the old blade. Remove the nuts holding the chainbrake on. Remove chain from the bar and sprocket. Install the new blade around the sprocket and in the chain bar. Install the chainbrake. Then adjust the blade to the right tension. Remove the old spark plug and install the new one, gapped at 0.025
Did you find this story helpful?
Thanks for voting and helping fellow customers!
5 of 6 people found this instruction helpful
Tool Type:
Blower
Parts Used:
Spark Plug - 952030150
Switch - 530069572
Repair Difficulty:
Easy
Time Spent Repairing:
30-60 minutes
Tools Used:
Screwdriver, Pliers
Hard starting and on/off switch defective
Both repairs were done without any disassembly. On/off rocker switch can easily be reverse repaired. Note wiring before removing old switch assembly. Remove the old spark pluge , then installed the new one.
Did you find this story helpful?
Thanks for voting and helping fellow customers!
2 of 2 people found this instruction helpful
Tool Type:
Chain Saw
Parts Used:
Fuel Line - 530069247
Spark Plug - 952030150
Air Filter - 530029811
Fuel Filter - 530095646
Repair Difficulty:
Medium
Time Spent Repairing:
30-60 minutes
Tools Used:
Screwdriver, Pliers, Wrench Set
Would not run when choke was off.
Replaced fuel line and pick up assembly. Cleaned the carburetor and changed the air filter. Adjusted the idle. The saw works like new now.
Did you find this story helpful?
Thanks for voting and helping fellow customers!
1 of 1 people found this instruction helpful
Tool Type:
Trimmer
Parts Used:
Fuel Line - 530069247
Spark Plug - 952030150
Purge Line - 530069216
Carburetor Repair Kit - 530069842
Fuel Filter - 530095646
Repair Difficulty:
Medium
Time Spent Repairing:
30-60 minutes
Tools Used:
Screwdriver, Pliers, Allen Wrench
Would not start sat idle for years. Prime bulb and rubber carb parts deteriorated.
Rebuilt Carb - job easier than I thought it would be. Take your time.
Replaced Fuel and purge (primer bulb line) lines and in tank fuel filter. Job Easier than carb.
Replaced Spark Plug. Job easier than Fuel lines.

Videos online great, worth 3000 words.

Runs like new!
Did you find this story helpful?
Thanks for voting and helping fellow customers!
1 of 1 people found this instruction helpful
Tool Type:
Chain Saw
Parts Used:
Fuel Line - 530069247
Spark Plug - 952030150
Purge Line - 530069216
Carburetor Repair Kit Walbro (WT324) - 530069826
Fuel Filter - 530095646
Repair Difficulty:
Medium
Time Spent Repairing:
1-2 hours
Tools Used:
Screwdriver, Pliers, Socket set, Gasket scraper
Saw wouldnt stay running
1. I removed covers to expose carb
2. I removed carb
3. I rebuilt carb per the instuctions that came with the kit
4. Replaced fuel line and filter and replaced purge line
5. Reinstall carb
6. Reinstall covers
7. Install new spark plug
8. Fill with fresh gas ,start and adjust carb per instructions
Did you find this story helpful?
Thanks for voting and helping fellow customers!
4 of 7 people found this instruction helpful
Tool Type:
Blower
Parts Used:
Fuel Line - 530069247
Spark Plug - 952030150
Fuel Filter - 530095646
Repair Difficulty:
Medium
Time Spent Repairing:
30-60 minutes
Tools Used:
Socket set, allen wrenches, copper wire
The old fuel line dried up and was crumbling.
I removed all of the pieces of the old fuel line and then threaded the new one into the fuel tank. I installed the new fuel filter onto the fuel line and fished it back into the tank with a length of copper wire. I then replaced the spark plug as usual.
Did you find this story helpful?
Thanks for voting and helping fellow customers!
Tool Type:
Chain Saw
Parts Used:
Fuel Line - 530069247
Spark Plug - 952030150
Air Filter - 530057869
Fuel Filter - 530095646
Repair Difficulty:
Medium
Time Spent Repairing:
30-60 minutes
Tools Used:
Screwdriver, Socket set, Nutdriver, Needle nose pliers
Chain saw would start but not run under full throttle.
Replaced the fuel line, fuel filter, spark plug, and air filter. Cut the fuel line at an angle to make it easier to thread through the hole into the fuel tank.
Did you find this story helpful?
Thanks for voting and helping fellow customers!
Tool Type:
Chain Saw
Parts Used:
Spark Plug - 952030150
Purge Bulb Kit - 530071835
Repair Difficulty:
Easy
Time Spent Repairing:
Less than 15 minutes
Tools Used:
Screwdriver
Purge bulb cracked
Took off side of chainsaw cover. Located purge bulb unscrewed the two screws and disconnected the two gas lines from purge bulb. Replaced gas lines on new purge bulb and replaced the new purge bulb with the two screws put the cover back on. Replaced the spark plug. Running fine.
Did you find this story helpful?
Thanks for voting and helping fellow customers!
Tool Type:
Chain Saw
Parts Used:
Spark Plug - 952030150
Carburetor Kit - 545013503
Carburetor Gasket - 530019172
Air Filter - 545057701
Assy-Fuel Pick-Up - 545038502
Repair Difficulty:
Medium
Time Spent Repairing:
More than 2 hours
Tools Used:
Screwdriver, Pliers, Power Drill, Nutdriver, Adjustable Wrench, Hemostats
Chainsaw wouldn't run or ran erratically.
Cleaned up the entire saw. Replaced air filter and bad fuel line and filter. Also replaced the carburetor kit and gasket. Ordered the wrong carburetor plate and luckily was able to use the old one. Also ordered the carburetor adaptor just in case but also didn't need it. Saw appeared to be turning too many RPM's when I could get it to run. I initially tried cleaning the carburetor with carb flush and got it to improve somewhat but unfortunately had to end up replacing carburetor kit. Saw is now operating smoothly. The videos and repair advice on your website really was a big help. Thanks!
Did you find this story helpful?
Thanks for voting and helping fellow customers!
Reviews
5
Average Rating (out of 5):
5 Reviews
Click to filter by ratings:
5 stars
5
4 stars
0
3 stars
0
2 stars
0
1 stars
0
  • Highest Rating
  • Most Recent
< PREV
  • 1
NEXT >
  • Exactly what I needed, and easily searchable product lists.
    Exactly the parts I needed, for the model chainsaw I own. Love the search machine they have. Perfect fit!
    Guest - June 3, 2019 Verified Purchase
    Chainsaw Repair
    eReplacementParts is great. The schematics make it easy to identify needed parts. Delivery is always prompt. And, my old chainsaw runs like new.
    Guest - May 29, 2019 Verified Purchase
    Great part...no issues...it started right up!
    Finding part and investigating was easy!
    Guest - May 27, 2019 Verified Purchase
    Husky chainsaw tuneup parts
    All the parts came on time and what are the exact replacement parts didn’t get a chance to tune it up yet
    Guest - May 17, 2019 Verified Purchase
    Worked like it should
    Arrived in great condition and was exactly what it was suppose to be,fast service too.
    Guest - April 27, 2019 Verified Purchase
    Verified Purchase
    eReplacementParts Team
    • Highest Rating
    • Most Recent
    < PREV
    • 1
    NEXT >
    Product Information
    Manufacturer: Poulan, Paramount, Weed Eater, Husqvarna, Jonsered
    Product Number: 952030150
    Classification: Part
    Weight: 0.06 lbs.
    Also Known As: Flame Igniter
    Shipping: Ships Worldwide
    Repair Guides
    Articles:
    How to Replace the Spark Plug on a Poulan Chainsaw (Model P3314)
    Sparks not flying? Learn to quickly remove and install the spark plug on your Poulan chainsaw. Step-by-step instructions...
    October 31, 2016
    Related Products
    eReplacementParts.com
    7036 South High Tech Dr.
    Midvale, UT 84047
    visa mastercard discover american express PayPal

    fancyboxy