eReplacementParts.com
877-346-4814
Toro Parts
Preferred Partners of
Repair Parts Home  Lawn Equipment Parts  Toro Parts  699728 Solenoid-Fuel

Solenoid-Fuel

Part Number: 699728
Briggs and StrattonToro
Availability: Special Order [ more info ]
Price: $144.99
Leaves our warehouse within
4 - 9 business days
Product Information
Manufacturer: Briggs and Stratton, Toro
Product Number: 699728
Classification: Part
Weight: 0.10 lbs.
Shipping: Ships Worldwide
Description:
This is an OEM part sourced directly from the manufacturer. The fuel solenoid is designed for use in engines and lawn tractors from Briggs & Stratton and Toro. This part is made of metal with a plastic tip, and comes with a sealing washer. It is used in the carburetor assembly to control the flow of fuel to the carburetor when the engine is shut off. You may require a screwdriver when replacing this part. This item is sold individually.
Compatibility

This part is compatible with the following machines:

Toro
Briggs and Stratton
445777-0231-E1 Engine
40F777-0100-B1 Engine
40F777-0111-E1 Engine
40F777-0112-E1 Engine
40F777-0113-B1 Engine
401577-0123-B1 Engine
401577-0124-B1 Engine
401577-0125-B1 Engine
401577-0126-B1 Engine
401577-0127-B1 Engine
401577-0128-B1 Engine
401577-0129-B1 Engine
401577-0130-B1 Engine
401577-0131-B1 Engine
401577-0132-B1 Engine
401577-0133-B1 Engine
401577-0724-E1 Engine
401577-0887-B1 Engine
401577-0996-B1 Engine
401577-1219-B1 Engine
401577-2219-B1 Engine
401577-5124-B1 Engine
401577-5127-B1 Engine
401577-5129-B1 Engine
401577-5130-B1 Engine
401577-5887-B1 Engine
4025A7-0224-E1 Engine
4035A7-0409-E1 Engine
403677-0343-E1 Engine
404577-0264-E1 Engine
404577-0291-E1 Engine
4045A7-0100-E1 Engine
4045A7-0211-E1 Engine
4045A7-0259-E1 Engine
4045A7-0285-E1 Engine
4045A7-0286-E1 Engine
4045A7-0307-E1 Engine
4045A7-0312-E1 Engine
405577-0110-E1 Engine
405577-0111-B1 Engine
405577-0111-E1 Engine
405577-0112-B1 Engine
405577-0112-E1 Engine
405577-0113-B1 Engine
405577-0113-E1 Engine
405577-0114-B1 Engine
405577-0114-G1 Engine
405577-0116-B1 Engine
405577-0118-B1 Engine
405577-0118-B2 Engine
405577-0122-B1 Engine
405577-0123-B1 Engine
405577-0123-E1 Engine
405577-0126-B1 Engine
405577-0128-B1 Engine
405577-0129-B1 Engine
405577-0129-B2 Engine
405577-0129-B3 Engine
405577-0129-B4 Engine
405577-0130-B1 Engine
405577-0280-B1 Engine
405577-0280-B2 Engine
405577-0280-B5 Engine
405577-0280-B6 Engine
405577-0281-B1 Engine
405577-0281-B2 Engine
405577-0379-B1 Engine
405577-0379-E1 Engine
405577-0688-B1 Engine
405577-0721-E1 Engine
405577-0803-B1 Engine
405577-0816-B1 Engine
Expand the 150+ compatible machines
Products Compatibility

This item works with the following types of products:

  • • Engine
  • • Lawn Tractor
Questions & Answers

Engine will not start unless I spray either or dump some gas into carb. Once started, it runs like a champ. Will start sometimes when engine warm, if it had just been running.
Bryan Dorie for model number 4045A70312E1 asked on 2020-03-27
Hi Bryan and thank you for writing Try adjusting the carburetor. Clean it with carburetor cleaner first, make sure the air filter is clean and that the spark plug is clean or new. Locate both idle screws on the carburetor, one marked L (low) and one marked H (high). Turn both screws in to shut off fuel then back off 2 turns, next start engine, it may not run great by should start at these settings, next let idle for a few minutes to get it to operating temperature, start by turning the L screw clockwise until the engine starts to slow then turn it in the opposite direction until it once again starts to slow, then bring it to the midpoint of these 2 spots. Using a tachometer to gauge engine speed, set the idle speed screw to bring the engine to 1750 RPM for aluminum-cylinder engine or 1200 RPM for an engine with a cast-iron cylinder sleeve. Next, at full throttle turn the high speed or main jet screw clockwise until the engine begins to slow. Then, turn the screw the other way until the engine begins to slow. Turn the screw back to the midpoint. Once adjusted, check the acceleration of the engine by moving the throttle from idle to fast. The engine should accelerate smoothly. If necessary readjust mixture screws. If problem persist then rebuild the carburetor and re-adjust again. Good luck with our repair.
Product Information
Manufacturer: Briggs and Stratton, Toro
Product Number: 699728
Classification: Part
Weight: 0.10 lbs.
Shipping: Ships Worldwide
eReplacementParts.com
7036 South High Tech Dr.
Midvale, UT 84047
visa mastercard discover american express PayPal