Install
Videos!

Watch The
Repair Video

Solenoid 7701100MA

Part Number: 7701100MA

14 Reviews

Order within the next 40 minutes
and your part ships today!

Questions & Answers

Repair Instructions

*This part replaces obsolete part #: 94613, 1002004, 721615, 1002004MA, 24285, 71094E1272, 024285MA, 94613MA, MU1002004MA and 094613MA.

Product Information

Description:

This is an OEM part sourced directly from the manufacturer. The solenoid is designed for use in Craftsman lawn tractors. This part is made of metal and high-quality plastic, and is an electrical component used to send electric signals through the machine to trigger the engine starting. You may require a wrench when replacing this part. This item is sold individually.

Warning: California's Proposition 65

Frequently Purchased With

Switch - Limit..
$13.97

Switch, Seat
$13.19

Belt-v-motion ..
$31.41

Belt
$36.54

Compatibility

This part is compatible with the following machines:

Murray

Expand the 150+ compatible machines

Products Compatibility

This item works with the following types of products:

• Lawn Tractor

Questions & Answers for Solenoid

Sort by

How do I blow out the carburetor and what tools do I need

Greg asked on 2023-04-21

Hello Greg, Thank you for asking. Make sure the carburetor and all parts are dry. The easiest way is with compressed air. Blow air into all holes, and parts of the carb with the compressor. After everything is dry, install the O-rings and gaskets. We hope this helps!

Repair Instructions: Submitted by Customers Like You

32 of 37 people found this instruction helpful

Tool Type:

Lawn Tractor

Parts Used:

Solenoid - 7701100MA

Repair Difficulty:

Easy

Time Spent Repairing:

15-30 minutes

Tools Used:

Socket set

The solenoid would click when I attempted to start the engine.

After checking the battery and connections, I felt the solenoid was probably the problem. Luckily, that turned out to be the case. So, for $20, I saved a trip to the repair shop and probably about a $150 repair bill.

Did you find this story helpful?

Thanks for voting and helping fellow customers!

30 of 38 people found this instruction helpful

Tool Type:

Lawn Tractor

Parts Used:

Solenoid - 7701100MA

Repair Difficulty:

Easy

Time Spent Repairing:

Less than 15 minutes

Tools Used:

Screwdriver, Pliers, Socket set, Wrench Set

Starter wouldn't work without shorting across solenoid

Made a diagram of wiring then removed old solenoid replaced it with a new one.

Did you find this story helpful?

Thanks for voting and helping fellow customers!

16 of 17 people found this instruction helpful

Tool Type:

Lawn Tractor

Parts Used:

Solenoid - 7701100MA

Repair Difficulty:

Easy

Time Spent Repairing:

15-30 minutes

Tools Used:

Screwdriver, Pliers, Socket set

Solenoid Replacement

Took phillips head to remove cover plate disconnect battery. Inside I took the wires on the terminals of the old solenoid and unbolted the solenoid then replaced with new.
This was very easy and no one should have any problem replacing.

Did you find this story helpful?

Thanks for voting and helping fellow customers!

16 of 18 people found this instruction helpful

Tool Type:

Lawn Tractor

Parts Used:

Solenoid - 7701100MA

Repair Difficulty:

Medium

Time Spent Repairing:

15-30 minutes

Tools Used:

Screwdriver, Socket set

My lawn tractor would not crank so I isolated the problem to be in the electrical system. I jumped the two connections on the solenoid and the starter jumped so I knew it needed to be replaced.

I disconnected the battery, opened the access panel and disconnected the old solenoid and replaced it with the new one. Reconnected all the wires and along with the battery and it cranked over just like it was suppose to. Easy fix but the access to the part I was replacing was a little tight. It took about 20-30 minutes to replace solenoid.

Did you find this story helpful?

Thanks for voting and helping fellow customers!

12 of 13 people found this instruction helpful

Tool Type:

Lawn Tractor

Parts Used:

Solenoid - 7701100MA

Repair Difficulty:

Easy

Time Spent Repairing:

Less than 15 minutes

Tools Used:

Screwdriver, Socket set, Adjustable Wrench, Wire crimping tool

Would not turn over,no voltage at starter with key in start position using volt/ohm meter.battery fully charged.

Disconnected battery removed access panel (two screws) on my Murray 48 inch mower. Access panel is just fwd of operators seat vertically centered with steering wheel. If your memory chip isn't real sharp anymore,you may want to take a photo of the wire connections, remove wires from solenoid just inside access area (five wires). Remove (two) bolts mounting solenoid in place,remove old solenoid. I cleaned the mounting surface on mower with sand paper. Clean and inspect wire and wire ends (crimps),you probably call them connectors or splices, any bad ones cut them off and crimp on a new one (wire crimping tool kit required). Then, reverse mode mount new solenoid connect wires (from your photo) just kidding. Connect battery,op's check went good. Spray some battery terminal protector on your wire connections and at base of solenoid, install access panel

Did you find this story helpful?

Thanks for voting and helping fellow customers!

7 of 8 people found this instruction helpful

Tool Type:

Lawn Tractor

Parts Used:

Solenoid - 7701100MA

Repair Difficulty:

Medium

Time Spent Repairing:

30-60 minutes

Tools Used:

Screwdriver, Socket set

Needed new solenoid

Tested the solenoid with a meter. It was bad. Removed the battery cables. And the cables from the solenoid. Removed the old solenoid and replaced it with the new one. Attached all of the cables. The tractor cranked right up. Thank you.

Did you find this story helpful?

Thanks for voting and helping fellow customers!

6 of 8 people found this instruction helpful

Tool Type:

Lawn Tractor

Parts Used:

Solenoid - 7701100MA

Repair Difficulty:

Easy

Time Spent Repairing:

15-30 minutes

Tools Used:

Screwdriver, Socket set

Solenoid went out in my lawn tractor.

Remove the cables from the battery, then from the solenoid. Remove the old solenoid and install the new one. Connect all of the cables. We're running now.

Did you find this story helpful?

Thanks for voting and helping fellow customers!

5 of 6 people found this instruction helpful

Tool Type:

Lawn Tractor

Parts Used:

Solenoid - 7701100MA

Repair Difficulty:

Medium

Time Spent Repairing:

15-30 minutes

Tools Used:

Socket set

Wouldn't start

I removed the cables from the battery, then from the solenoid, Removed the solenoid and installed the new one, replaced the all of the cables. It starts every time now.

Did you find this story helpful?

Thanks for voting and helping fellow customers!

2 of 2 people found this instruction helpful

Tool Type:

Lawn Mower

Parts Used:

Solenoid - 7701100MA

Repair Difficulty:

Easy

Time Spent Repairing:

30-60 minutes

Tools Used:

Wrench Set

Starter Solenoid Defective

Remove the cables from the battery
Locate solenoid, disconnected the cables and remove the old one and bolt in the new one
Connect the solenoid cables and then the battery cables

Did you find this story helpful?

Thanks for voting and helping fellow customers!

2 of 2 people found this instruction helpful

Tool Type:

Lawn Tractor

Parts Used:

Switch, Plunger, N.o. - 5021451SM

Solenoid - 7701100MA

Repair Difficulty:

Medium

Time Spent Repairing:

15-30 minutes

Tools Used:

Pliers, Socket set, Nutdriver

Tractor would not start

1. Described my problem on ereplacementparts.com web page
2. Noted suggestions on repair with percentage of confidence
3. Ordered new solenoid
4. Removed battery for access
5. Removed old solenoid
6. Installed new solenoid
7. Replaced the fuse in the circuit as a precaution
8. Replaced the battery
9. Turned the key to start and the tractor started right up

Did you find this story helpful?

Thanks for voting and helping fellow customers!

Reviews

Average Rating (out of 5):

14 Reviews

Click to filter by ratings:

5 stars

4 stars

3 stars

2 stars

1 stars

Sort by:

Highest Rating
Most Recent

< PREV

NEXT >

Thanks

Thanks for having the right part

Guest - March 7, 2023 Verified Purchase

Right part, good price

The part arrived quick, perfect fit

Guest - June 28, 2022 Verified Purchase

Easy to work with.

The part was a perfect fit and came When promised. Thank you.

Guest - August 7, 2020 Verified Purchase

simple repair

Arrived quickly, perfect match to the old one. My mower purred like a kitten after putting it on.

James - July 6, 2020 Verified Purchase

geat service and easy to use web site.

it was the part i needed. Thanks

Guest - June 30, 2020 Verified Purchase

worked as expected

great service thanks for your help

Guest - May 26, 2020 Verified Purchase

Easy repair

came on time.

Brandon - May 23, 2020 Verified Purchase

replacement part. Part fit perfect

Part arrived in the time frame that was reasonable.

Guest - November 6, 2019 Verified Purchase

worked

worked great

Guest - October 5, 2019 Verified Purchase

Good part and right part also.

Same as above

Guest - July 5, 2019 Verified Purchase

Verified Purchase

eReplacementParts Team

Sort by:

Highest Rating
Most Recent

< PREV

NEXT >

Product Information