Medium
15-30 minutes
This is a genuine OEM sourced part that is intended to be used with routers from Porter Cable, Delta, and Black & Decker. The metal snap ring is part of the collet and nut assembly. This item is used to fasten the collet and nut together. This item can be purchased as a single item.
Snap-ring 823030
OEM part for: Porter Cable
Part Number: 823030
$4.99
In Stock
Ships within 1 business day 
Compatibility
This Snap-ring will fit the following 208 machines. Confirm this part works with your model, and view the detailed model diagrams and repair help we have to offer.
Displaying 20 of 208 matching models.
Porter Cable
Show More Compatible Models208 total model matches. Try the above search to narrow your results.
This is the official OEM part for the following brands:
- Black and Decker
- DeWALT
- Porter Cable
This item works with the following types of products:
- Engine
- Router
Repair Videos ?
Watch the Repair Video for
Snap-ring
Articles:
|
Collet in pieces? Replace the collet, nut, or retaining-ring on your Porter Cable 690 router with these instructions....
June 25, 2015
|
Questions & Answers ?
Our customer Service team is at the ready daily to answer your part and product questions.
Ask our Team
We have a dedicated staff with decades of collective experience in helping customers just like you purchase parts to repair their products.
Does this fit my product?Questions & Answers for Snap-ring
No questions have been asked yet
Customer Repair Instructions ?
All our customer repair instructions are solicited directly from other customers just like you who have purchased and replaced this exact part.
Moulded cord at router end deteriorated.
Mark - March 13, 2022
Tool Type
Router
Difficulty
Medium
Time
15-30 minutes
Tools Used
Screwdriver, T20 torx tip, wire butt splices, diagonal cutters, crimper
Parts Used
1 - remove router top plastic cover (2 Phillips screws).
2 - remove cord moulded end capture clamp (2 T20 torx screws).
3 - cut black, white and green wires from existing crimp connections.
4 - cut to length same color wires on new cord.
5 - using 16 gauge crimp butt splices and crimping tool, connect new cord wires to router internal wires.
6 - install moulded cord clamp over new cord end (2 T20 screws)
7 - install plastic cover (2 Phillips screws).
8 - Insure on / off switch is in off position, plug in, turn on to test.
9 - In my case, I'd lost the collet chuck snap ring nut retainer, so I also installed the new one provided (purchased by me).
2 - remove cord moulded end capture clamp (2 T20 torx screws).
3 - cut black, white and green wires from existing crimp connections.
4 - cut to length same color wires on new cord.
5 - using 16 gauge crimp butt splices and crimping tool, connect new cord wires to router internal wires.
6 - install moulded cord clamp over new cord end (2 T20 screws)
7 - install plastic cover (2 Phillips screws).
8 - Insure on / off switch is in off position, plug in, turn on to test.
9 - In my case, I'd lost the collet chuck snap ring nut retainer, so I also installed the new one provided (purchased by me).
Did you find this story helpful?
Thanks for voting and helping fellow customers!
On/off switch failed and bits sloped in the collet.
Kyle - August 19, 2019
Tool Type
Router
Difficulty
Medium
Time
15-30 minutes
Tools Used
Screwdriver, Pliers
Did you find this story helpful?
Thanks for voting and helping fellow customers!
Was given a Porter Cable router with 1/4" collet only. Needed 1/2" Collet.
Bill - December 19, 2018
Tool Type
Router
Difficulty
Easy
Time
Less than 15 minutes
Tools Used
, Snap ring pliers
Parts Used
1/2" collet assbly out of stock so bought components and assembled.
Did you find this story helpful?
Thanks for voting and helping fellow customers!
Misplaced the 1/2 collet and nut.
Arthur - November 1, 2017
Tool Type
Router
Difficulty
Easy
Time
Less than 15 minutes
Tools Used
Wrench Set
Just put the new collet and the nut on the router.
Did you find this story helpful?
Thanks for voting and helping fellow customers!
OEM stands for Original Equipment Manufacturer and means the part you’re buying is sourced directly from the manufacturer who made your product. At eReplacementParts, we sell only genuine OEM parts, guaranteeing the part you’re purchasing is of better design and of higher quality than aftermarket parts.
Learn MoreOur product descriptions are a combination of data sourced directly from the manufacturers who made your product as well as content researched and curated by our content & customer service teams. This content is edited and reviewed internally before being made public to customers.
Our customer service team are at the ready daily to answer your part and product questions. We have a dedicated staff with decades of collective experience in helping customers just like you purchase parts to repair their products.
All our part reviews are solicited directly from other customers who have purchased this exact part. While we moderate these reviews for profanity, offensive language or personally identifiable information, these reviews are posted exactly as submitted and no alterations are made by our team.
All our customer repair instructions are solicited directly from other customers just like you who have purchased and replaced this exact part. While we moderate these reviews for profanity, offensive language or personally identifiable information, these reviews are posted exactly as submitted and no alterations are made by our team.
Based on data from past customer purchasing behaviors, these parts are most commonly purchased together along with the part you are viewing. These parts may be necessary or helpful to replace to complete your current repair.
All our installation videos are created and produced in collaboration with our in-house repair technician, Mark Sodja, who has helped millions of eReplacementParts customers over the last 13 years repair their products. Mark has years of experience in selling and repairing both commercial and residential products with a specialty in gas-powered equipment.
This data is collected from customers who submitted a repair instruction after replacing this exact part. Customers can rate how easy the repair was to complete and how long it took. We aggregate this data to provide a repair rating that allows customers to quickly determine the difficulty and time needed to perform their own repair.
