*This part replaces obsolete part #: 22154-33310.
Product Information
Products Compatibility
This item works with the following types of products:
- • Chain Saw
- • Saw
Repair Guides
Articles:
Filthy Filters? This article will show you how to install a filter kit on an Echo SRM-225 trimmer....
May 27, 2015
|
Questions & Answers for Slide Stopper
No questions have been asked yet
Repair Instructions: Submitted by Customers Like You
1 of 1 people found this instruction helpful
Tool Type:
Chain Saw
Repair Difficulty:
Medium
Time Spent Repairing:
1-2 hours
Tools Used:
Pliers, allen wrenches
Missing slide stopper. trigger spring bent beyond repair.
Had to remove allen screws from handle assembly so it would drop down far enough to get the spring and slide stopper out. Had to remove pin's holding trigger and trigger lock out to install the spring and slide stopper. The hardest part was getting the spring back in place. Replace the trigger and return spring first then install the trigger lock and slide stopper and the pin holding the trigger lock. Reinstall handle on the saw. You also need to remove the handle bar and side cover over the chain to get to allen screw's holding the handle assembly. If you have never worked on a chain saw before you might want to leave this job to a qualified mechanic.
Did you find this story helpful?
Thanks for voting and helping fellow customers!
Product Information
Repair Guides
Articles:
Filthy Filters? This article will show you how to install a filter kit on an Echo SRM-225 trimmer....
May 27, 2015
|