Miter Slider B- Bt3000 661845001
Part Number: 661845001
Order within the next 5 hours
and your part ships today!
and your part ships today!
Product Information
Description:
| It is a genuine item that is supplied directly from the original equipment manufacturer for use with Craftsman table saws. This is an identical replacement for a missing or a faulty slide that helps to create a smooth sliding motion for the miter table top. Please make sure to refer to the appropriate diagrams of your model for the correct location and application of this hardware. Keep in mind this high-quality part is made of durable plastic and is sold individually. |
Frequently Purchased With
Compatibility
Products Compatibility
This item works with the following types of products:
- • Saw
- • Table Saw
Questions & Answers for Miter Slider B- Bt3000
If I order 1 do I get a 1 set (4 for 4 corners) or do I need to order 4 for the complete set?
Ashok
for model number BT3100
asked on 2022-03-10
Hello Ashok, thank you for your question. The Slide part 661845001 is made of durable plastic and is sold individually. If you need help placing an order, customer service is open 7 days a week. Please feel free to give us a call. We look forward to hearing from you.
eReplacementParts Team March 10, 2022
Repair Instructions: Submitted by Customers Like You
2 of 2 people found this instruction helpful
Tool Type:
Table Saw
Repair Difficulty:
Medium
Time Spent Repairing:
15-30 minutes
Tools Used:
Screwdriver
I DROPPED THE SLIDE PLATFORM AND THE LITTLE SLIDE PIECES BROKE.
REMOVED THE BROKEN PIECES AND REPLACED THEM WITH THE NEW ONES
Did you find this story helpful?
Thanks for voting and helping fellow customers!
1 of 1 people found this instruction helpful
Tool Type:
Table Saw
Parts Used:
Repair Difficulty:
Medium
Time Spent Repairing:
15-30 minutes
Tools Used:
Screwdriver, Nutdriver, FILE
Slide could not be adjusted.
There are four slides to adjust the orientation of the sliding table. Slides are adjusted individually with eccentric screws holding the individual slide set. Each slide set has two mating plastic pieces. These are identified slide "A" (top) and "B"(bottom) on the parts diagram of the table saw. Each part has a different part number. They are 66184401 and 66184501 respectively. The two sub-parts are connected with the eccentric screw of the slide. You are selling only the bottom piece. I had to use a file to configure the the extra piece I ordered to look like the top piece. It is not pretty but it works.
Did you find this story helpful?
Thanks for voting and helping fellow customers!
1 of 1 people found this instruction helpful
Tool Type:
Table Saw
Parts Used:
Repair Difficulty:
Easy
Time Spent Repairing:
More than 2 hours
Tools Used:
Screwdriver, Socket set, Wrench Set
Missing set screw, broken quick stop, and discovery of incorrectly installed SS shims were replaced or corrected.
One set screw was missing from the Miter table cam latches over the last 14 years of use by the original owner (he and I used this saw beginning in 2004 when he purchased it for a house renovation project). The second owner was my son who upgraded in 2015 after replacing the drive belts. I bought it back from my son and have used it since as a traveling construction quality saw. The parts I have bought have been to keep it serviceable as long as possible. Too many critical parts are no longer available. I will part this out unless I can find someone who has the same feeling. The Ryobi BT3000 is a good quality construction saw, used in conjunction with my 50yo Delta Cabinet saw.
1 Slide B broke, rendering the mitre table useless. It has been replaced and re adjusted.
The quick stop mitre stop broke many years ago.
What was significant and corrected was the mis installation of the SS shims that caused the Blade raise system to lock up. That required 3 total hours of investigation and correction without replacement parts, but the SS shims (Fig 59, parts 86 had to removed, hammered, and correctly reinstalled.
1 Slide B broke, rendering the mitre table useless. It has been replaced and re adjusted.
The quick stop mitre stop broke many years ago.
What was significant and corrected was the mis installation of the SS shims that caused the Blade raise system to lock up. That required 3 total hours of investigation and correction without replacement parts, but the SS shims (Fig 59, parts 86 had to removed, hammered, and correctly reinstalled.
Did you find this story helpful?
Thanks for voting and helping fellow customers!
Tool Type:
Table Saw
Parts Used:
Repair Difficulty:
Easy
Time Spent Repairing:
30-60 minutes
Tools Used:
Screwdriver, Pliers, Socket set, Wrench Set
Clamp broke, Slide wore out
Just replaced what was broken
Did you find this story helpful?
Thanks for voting and helping fellow customers!
Tool Type:
Table Saw
Parts Used:
Repair Difficulty:
Easy
Time Spent Repairing:
15-30 minutes
Tools Used:
Screwdriver, Nutdriver
Slide table dropped and slides broke
1 of 4 slides did not break so used that for guide.
Went well and back to using table saw...
Went well and back to using table saw...
Did you find this story helpful?
Thanks for voting and helping fellow customers!
Tool Type:
Table Saw
Parts Used:
Repair Difficulty:
Easy
Time Spent Repairing:
Less than 15 minutes
Tools Used:
Screwdriver, Socket set
Broken plastic slide
Removed slide from holder. Then replaced it and the nut and washer.
Did you find this story helpful?
Thanks for voting and helping fellow customers!
0 of 1 people found this instruction helpful
Tool Type:
Table Saw
Repair Difficulty:
Easy
Time Spent Repairing:
30-60 minutes
Tools Used:
Screwdriver, Wrench Set
Slides worn out
Removed the bolt securing the old pad and removed them, installed the new pads with the bolt
Did you find this story helpful?
Thanks for voting and helping fellow customers!
Reviews
6 Reviews
Average Rating (out of 5):
Click to filter by ratings:
5 stars
6
4 stars
0
3 stars
0
2 stars
0
1 stars
0
< PREV
- 1
Perfect
Just what I needed to fix my old saw. Quick delivery. Thanks!
Guest -
June 1, 2021
Verified Purchase
exact replacement of orginal perfect
parts came fast, fit perfect, back in operation again. thanks for great service.
edward -
April 22, 2020
Verified Purchase
good stuff
good stuff
Guest -
January 17, 2020
Verified Purchase
Happy customer.
glad to find this part, perfect fit.
Guest -
September 24, 2019
Verified Purchase
Table saw slide
Worked perfect
Guest -
September 12, 2019
Verified Purchase
Engine repair
All the gaskets are name brand and fit exactly right.
Guest -
June 1, 2019
Verified Purchase
Verified Purchase
eReplacementParts Team
< PREV
- 1
Product Information
