Shoe:skid 784-5580-4044
Part Number: 784-5580-4044
Order within the next 4 hours
and your part ships today!
and your part ships today!
*This part replaces obsolete part #: 784-5580-0721.
Product Information
Description:
| This is an authentic Craftsman replacement part that is sourced from the original manufacturer to be used with snowblowers. The metal skid connects to the auger housing and is used to adjust the height of the auger off of the ground. This item is sold individually, please note two skid shoes may be required. |
Frequently Purchased With
Compatibility
the 18 compatible machines
This part is compatible with the following machines:
MTD
31AE644E129 (1998) Snowblower
31A-3BAD729 (2005) Snow Thrower
31AM32AD799 (247.88755)(2008) Snowblower
31AM32BD799 (247.88779)(2009) Snowblower
31AS32BD799 (247.88779)(2010) Snowblower
31A-62BD799 (247.88787)(2011) Snowblower
31A-3BAD729 (2005) Snow Thrower
31AM32AD799 (247.88755)(2008) Snowblower
31AM32BD799 (247.88779)(2009) Snowblower
31AS32BD799 (247.88779)(2010) Snowblower
31A-62BD799 (247.88787)(2011) Snowblower
31AS32BD799 (247.887791)(2011) Snowblower
31BS32BD799 (247.881700)(2012) Snowblower
31A-32BD799 (247.88199)(2014) Snowblower
31A-3ABD799 (247.881980)(2015) Snowblower
31A-3ABD799 (247.881980)(2016) Snowblower
31BS32BD799 (247.881700)(2012) Snowblower
31A-32BD799 (247.88199)(2014) Snowblower
31A-3ABD799 (247.881980)(2015) Snowblower
31A-3ABD799 (247.881980)(2016) Snowblower
Craftsman
Products Compatibility
This item works with the following types of products:
- • Snowblower
Questions & Answers for Shoe:skid
No questions have been asked yet
Repair Instructions: Submitted by Customers Like You
Tool Type:
Snowblower
Parts Used:
Repair Difficulty:
Easy
Time Spent Repairing:
Less than 15 minutes
Tools Used:
Socket set, WD40
Skid shoes on the snowblower were worn out, needed to be replaced.
1. Sprayed the bolts with WD40. Let them set for a half hour.
2. Took a ratchet and socket and removed the bolts, slid off old skid shoes.
3. Put on new skid shoes, replaced the bolts.
2. Took a ratchet and socket and removed the bolts, slid off old skid shoes.
3. Put on new skid shoes, replaced the bolts.
Did you find this story helpful?
Thanks for voting and helping fellow customers!
Tool Type:
Snowblower
Repair Difficulty:
Easy
Time Spent Repairing:
15-30 minutes
Tools Used:
Socket set, Wrench Set
worn out parts
removes parts and replaced with new followed up with minor adjustment
Did you find this story helpful?
Thanks for voting and helping fellow customers!
Tool Type:
Snowblower
Parts Used:
Repair Difficulty:
Easy
Time Spent Repairing:
Less than 15 minutes
Tools Used:
Wrench Set, Adjustable Wrench
Skid Shoe was worn.
Replaced the old part with the new one. Just two bolts, took just five minutes.
Did you find this story helpful?
Thanks for voting and helping fellow customers!
Product Information
