Shim-hold Down Cli 1752460
Part Number: 1752460
Order within the next 12 hours
and your part ships today!
and your part ships today!
*This part replaces obsolete part #: GW-1752460.
Product Information
Description:
This replacement part is supplied directly from the original equipment manufacturer. It is specially designed for Troy-Bilt, MTD and Bolens snowthrowers. The shim-hold down clip is an important component which helps to secure the chute assembly. This is an identical replacement for a damaged or a missing part that was installed on a new unit. Keep in mind this high-quality component is made of durable material and is sold individually. Refer to the appropriate diagrams for your model to ensure the correct installation of the new part. A wrench set will be needed to perform this repair. |
Frequently Purchased With
Compatibility
the 27 compatible machines
This part is compatible with the following machines:
Bolens
Troy-Bilt
42000 21" Self-Propelled (S/N 420000100101-420001199999)
42012 26In. Self Propelled Snow Thrower
42027 (420270100101-420271199999) Snow Thrower
42000 (420000100101-420001199999) 21-Inch Self-Propelled
42010 (420100100101-420101199999) 8hp/24-Inch Self-Propelled
42012 (420120100101-420121199999) 10hp/26-Inch Self-Propelled
42013 (420130100101-420130199999) 4hp/21-Inch Auger-Propelled
42013 (420130200101-420131199999) 4hp/21-Inch Auger-Propelled
42033 (420331100101-420331199999) 10hp 30-Inch Self-Propelled
42034 (420341100101-420341199999) 8hp 26-Inch Self-Propelled
42035 (420350100101-420350199999) 6hp 24-Inch Self-Propelled
42036 (420361100101-420361199999) 13hp 32-Inch Self-Propelled
42039 (420391100101-420391199999) 8hp 26-Inch Self-Propelled Differential
42012 26In. Self Propelled Snow Thrower
42027 (420270100101-420271199999) Snow Thrower
42000 (420000100101-420001199999) 21-Inch Self-Propelled
42010 (420100100101-420101199999) 8hp/24-Inch Self-Propelled
42012 (420120100101-420121199999) 10hp/26-Inch Self-Propelled
42013 (420130100101-420130199999) 4hp/21-Inch Auger-Propelled
42013 (420130200101-420131199999) 4hp/21-Inch Auger-Propelled
42033 (420331100101-420331199999) 10hp 30-Inch Self-Propelled
42034 (420341100101-420341199999) 8hp 26-Inch Self-Propelled
42035 (420350100101-420350199999) 6hp 24-Inch Self-Propelled
42036 (420361100101-420361199999) 13hp 32-Inch Self-Propelled
42039 (420391100101-420391199999) 8hp 26-Inch Self-Propelled Differential
42040 (420401100101-420401199999) 10hp 30-Inch Self-Propelled Differential
42041 (420411100101-420411199999) 13hp 32-Inch Self-Propelled Differential
42046 6.5 Hp 24-Inch Snowthrower
42047 8hp/26-Inch Auger Snowthrower
42048 10hp/30-Inch Auger Snowthrower
42049 13hp/32-Inch Auger Snowthrower
42051 9.5 Hp 26-Inch Snowthrower
5210R (B270100101-B270299999) 21-Inch Self-Propelled
5210RS (B350100101-B350299999) Sears
826R (B250100101-B250199999) 26-Inch Self-Propelled
42050 7.5 Hp 24-Inch Snowthrower Snow Thrower
42052 11 Hp 30-Inch Snowthrower Snow Thrower
42041 (420411100101-420411199999) 13hp 32-Inch Self-Propelled Differential
42046 6.5 Hp 24-Inch Snowthrower
42047 8hp/26-Inch Auger Snowthrower
42048 10hp/30-Inch Auger Snowthrower
42049 13hp/32-Inch Auger Snowthrower
42051 9.5 Hp 26-Inch Snowthrower
5210R (B270100101-B270299999) 21-Inch Self-Propelled
5210RS (B350100101-B350299999) Sears
826R (B250100101-B250199999) 26-Inch Self-Propelled
42050 7.5 Hp 24-Inch Snowthrower Snow Thrower
42052 11 Hp 30-Inch Snowthrower Snow Thrower
Products Compatibility
This item works with the following types of products:
- • Snowblower
Questions & Answers for Shim-hold Down Cli
No questions have been asked yet
Repair Instructions: Submitted by Customers Like You
2 of 2 people found this instruction helpful
Tool Type:
Snowblower
Repair Difficulty:
Easy
Time Spent Repairing:
Less than 15 minutes
Tools Used:
Nutdriver, Adjustable Wrench, none
Chute nylon clips broke
Replaced shims and hold down clips
Did you find this story helpful?
Thanks for voting and helping fellow customers!
Tool Type:
Snowblower
Repair Difficulty:
Medium
Time Spent Repairing:
15-30 minutes
Tools Used:
Socket set, Wrench Set
Need to replace clip-hold down on the snowblower chute.
Chute on the snowblower would not stay on any more. The old clips were worn out . Put the new ones on now the chute stays on. Shops around here didn't have any. eReplacementParts.com! had them ship them out. Took 3 days to get them. So any other parts I need I will check with them.
Thanks for your help.
Thomas F.
Fargo N,D
Thanks for your help.
Thomas F.
Fargo N,D
Did you find this story helpful?
Thanks for voting and helping fellow customers!
Reviews
1 Reviews
Average Rating (out of 5):
Click to filter by ratings:
5 stars
1
4 stars
0
3 stars
0
2 stars
0
1 stars
0
< PREV
- 1
Love the parts Selection you always have what I’m looking for. 😁👊👍🏻👏
Get my snowblower up and go on the same day bye-bye fine thank you.
Guest -
March 1, 2022
Verified Purchase
Verified Purchase
eReplacementParts Team
< PREV
- 1
Product Information