Product Information
Frequently Purchased With
Compatibility
This part is compatible with the following machines:
the 11 compatible machines
Products Compatibility
This item works with the following types of products:
- • Nailer
Questions & Answers for Seal
No questions have been asked yet
Repair Instructions: Submitted by Customers Like You
Tool Type:
Nailer
Parts Used:
Repair Difficulty:
Easy
Time Spent Repairing:
15-30 minutes
Tools Used:
Pliers, Hex Wrench Set
leaking air from top, not firing.
Using a 5mm hex wrench, remove the four screws from top of the nail gun. Be a little careful, as there is a spring in the assembly that will push the top of the gun off. I used a schematic I printed from the Senco website to identify the broken parts and determine the correct reassembly order. Otherwise, just remove one o-ring or seal at a time and replace with the one from the kit. It seems that this kit is designed for multiple tool models so you will have a few parts left over. The challenge in the reassembly was figuring out that large outer seal on the aluminum chamber had to be installed in the gun body and the tube the installed.
Did you find this story helpful?
Thanks for voting and helping fellow customers!
Product Information