eReplacementParts.com
877-346-4814
Makita Parts
Repair Parts Home  Power Tool Parts  Makita Parts  265067-7 Screw M4x10

Screw M4x10 265067-7

OEM part for: Makita

Part Number: 265067-7


Install
Videos!
Screw M4x10 - 265067-7:Makita 360 View
Screw M4x10 - 265067-7:MakitaScrew M4x10 - 265067-7:MakitaScrew M4x10 - 265067-7:Makita 360 View
$4.99
In Stock
Order within the next 8 hours and your part ships today!
Medium 15-30 minutes (1 rated repairs)?
OEM: Original Equipment Manufacturer ?
Makita
Does this d-block d-md-none fit my product?

Product Description ?

It is a genuine OEM sourced replacement screw which is specially produced for use with Makita sanders. This is one of the screws used to secure the bearing retainer. This screw is made of high-quality metal and it is sold individually, please note you will need a Phillips head screwdriver to install or remove this hardware.

  • Classification: Part
  • Weight: 0.01 lbs.
  • Shipping: Ships Worldwide

Frequently Purchased Together ?

Compatibility

This part will fit the following 2 machines

Makita

BO5001 Random Orbit Sander View Diagrams & Manuals
BO5000 Sander View Diagrams & Manuals
Don't see yours? Try searching our site for :

This item works with the following types of products:

  • Sander Parts

Questions & Answers ?

Our customer Service team is at the ready daily to answer your part and product questions.

photo of team member
Ask our Team

We have a dedicated staff with decades of collective experience in helping customers just like you purchase parts to repair their products.

Does this fit my product?

Questions & Answers for Screw M4x10


No questions have been asked yet

Customer Repair Instructions ?

All our customer repair instructions are solicited directly from other customers just like you who have purchased and replaced this exact part.

Medium 15-30 minutes (1 rated repairs)?

The hook and loop pad of the random orbit sander would no longer hold the sandpaper.

David - February 23, 2016
Tool Type

Sander

Difficulty

Medium

Time

15-30 minutes

Tools Used

Screwdriver, allen wrench

For this particular sander, there are only three screws to remove for replacement of the 196905-1 hook-and-loop pad. One is in the center of the pad. You have to pry out a little felt pad from the center of the hook-and-loop to get to the first screw. I wedged a screwdriver into the fins of the cooling fan to hold the pad from turning while loosening the screw. With that screw removed, the hook and loop pad together with its backing plate comes right off. Turn the pad over and on its back side and remove the two Phillips head screws to separate the hook and loop pad from the metal backing plate. These two screws also hold the sealed ball bearing in place. These screws are installed with a thread-locking compound, and will probably be damaged by removal. On mine, one screw twisted off and the on other the threads looked partly stripped. Thinking back, it does make sense that they would be installed with some type of thread-locking compound, since sanders do definitely vibrate. While you have the backing plate off, check the sealed ball bearing in the center. On mine the bearing was starting to feel just a little bit rough, so I ordered an new one along with the other parts. Suggestion: Lay out the parts in order immediately after disassembly and take a photo with your cell phone so you can be absolutely certain to get everything back together in the same order. Reassembly is a pretty straightforward reversal of the disassembly process. The bearing is a tight fit. If you don't have a press you can use a large vise to press it into the backing plate. if you don't have a large enough vise, you can using a socket that matches the outside diameter of the bearing to tap it in very carefully with a hammer. Don't hammer directly on the bearing and be sure to keep it lined up straight. Don't force it if it starts to go crooked. Back off and start again. Be sure to use some strong Loctite or equivalent on the two screws holding the hook-and-loop pad to the backing plate.
Did you find this story helpful?
Thanks for voting and helping fellow customers!

OEM stands for Original Equipment Manufacturer and means the part you’re buying is sourced directly from the manufacturer who made your product. At eReplacementParts, we sell only genuine OEM parts, guaranteeing the part you’re purchasing is of better design and of higher quality than aftermarket parts.

Our product descriptions are a combination of data sourced directly from the manufacturers who made your product as well as content researched and curated by our content & customer service teams. This content is edited and reviewed internally before being made public to customers.

Our customer service team are at the ready daily to answer your part and product questions. We have a dedicated staff with decades of collective experience in helping customers just like you purchase parts to repair their products.

All our part reviews are solicited directly from other customers who have purchased this exact part. While we moderate these reviews for profanity, offensive language or personally identifiable information, these reviews are posted exactly as submitted and no alterations are made by our team.

All our customer repair instructions are solicited directly from other customers just like you who have purchased and replaced this exact part. While we moderate these reviews for profanity, offensive language or personally identifiable information, these reviews are posted exactly as submitted and no alterations are made by our team.

Based on data from past customer purchasing behaviors, these parts are most commonly purchased together along with the part you are viewing. These parts may be necessary or helpful to replace to complete your current repair.

All our installation videos are created and produced in collaboration with our in-house repair technician, Mark Sodja, who has helped millions of eReplacementParts customers over the last 13 years repair their products. Mark has years of experience in selling and repairing both commercial and residential products with a specialty in gas-powered equipment.

This data is collected from customers who submitted a repair instruction after replacing this exact part. Customers can rate how easy the repair was to complete and how long it took. We aggregate this data to provide a repair rating that allows customers to quickly determine the difficulty and time needed to perform their own repair.

eReplacementParts.com
7174 South 400 West
Suite 5
Midvale, UT 84047
visa mastercard discover american express PayPal