Easy
Less than 15 minutes
This Pad is designed for the "Adhesive Backed" Sanding Pads.rnThe (PSA) sander pad is a direct replacement for many Dewalt orbital sanders. It is a genuine Dewalt part, not off-brand. It features a foam body attached to a metal backing plate. It also has a sturdy smooth style bottom for use with sticky adhesive sandpaper. This pad does not have vacuum holes. It is 5" in diameter.
This pad is compatible with the Dewalt sanders listed below.
This pad is interchangeable with sanders fitted with 5" hook-and-loop pads. If you prefer to fit your sander with hook-and-loop sandpaper instead of adhesive, you will need the hook-and-loop pad listed under "Related Products" below. Model compatibility is the same.
Sander Pad (5-inch) 151662-00
OEM part for: DeWALT, Porter Cable
Part Number: 151662-00
$25.53
In Stock
Order within the next 5 hours and your part ships today! 
Jump To:
Product Description ?
- Genuine O.E.M. Dewalt sander pad
- Smooth underside for use with sticky adhesive sandpaper
- No vacuum holes 5"
- Classification: Part
- Weight: 0.10 lbs.
- Shipping: Ships Worldwide
Frequently Purchased Together ?
Compatibility
This part will fit the following 12 machines
DeWALT
DW420 Type 1 Random Orbit Sander View Diagrams & Manuals
DW420 Type 2 Random Orbit Sander View Diagrams & Manuals
DW421 Type 1 Random Orbit Sander View Diagrams & Manuals
DW421 Type 2 Random Orbit Sander View Diagrams & Manuals
DW422 Type 1 EVS Random Orbit Palm Sander View Diagrams & Manuals
DW423 Type 1 5 inch EVS Random Orbit Sander View Diagrams & Manuals
DW423 Type 2 5 inch EVS Random Orbit Sander View Diagrams & Manuals
D26453 Type 1 Random Orbit Sander View Diagrams & Manuals
D26450 Type 1 Random Orbit Sander View Diagrams & Manuals
D26451 Type 1 Random Orbit Sander View Diagrams & Manuals
Porter Cable
392 Type 1 5" Low Profile Random Orbit Sander View Diagrams & Manuals
353 (Type 2) 5in Sander Power Tool View Diagrams & Manuals
Show More Compatible Models
This item works with the following types of products:
- Sander Parts
This part replaces obsolete part #: 650978-00
Repair Videos ?
Watch the Repair Video for
Sander Pad (5-inch)
Articles:
|
Step-by-step instructions for removing and installing the sanding pad (for adhesive-backed paper) on your Porter Cable s...
January 11, 2018
|
Customer Part Reviews ?
Average Rating (out of 5):
Click to filter by ratings:
5 stars
6
4 stars
0
3 stars
0
2 stars
0
1 stars
1
< PREV
- 1
Ordered wrong part. Great service.
I ordered a wrong, but similar, part for my orbital sander. The return and replacement went smoothly.
Graves -
January 17, 2023
Verified Purchase
easy repair
I bought this item to replace the pad on my Black and Decker sander, the Black and Decker is discontinued and no replacement was offered, so I ordered this one and drilled new holes to line up with the black and decker and it works like new.
Guest -
August 28, 2021
Verified Purchase
Easy repair
I love the convenience and availability of ereplacement parts
Guest -
September 1, 2020
Verified Purchase
This place always has the parts I need.
Part fit like it should. Thank You!
Guest -
February 13, 2020
Verified Purchase
love
that pad work good
Guest -
July 12, 2019
Verified Purchase
Not cheap ,but what you need.
The parts fit perfectly 'got here quick .
Guest -
May 1, 2019
Verified Purchase
You guys are great....first time i ordered the wrong part, wanted it to be able to hold hook and loop.
You are fast and reliable,
Guest -
November 8, 2022
Verified Purchase
t
t
t -
t days ago
Verified Purchase
eReplacementParts Team
t
Questions & Answers ?
Our customer Service team is at the ready daily to answer your part and product questions.
Ask our Team
We have a dedicated staff with decades of collective experience in helping customers just like you purchase parts to repair their products.
Does this fit my product?Questions & Answers for Sander Pad (5-inch)
No questions have been asked yet
Customer Repair Instructions ?
All our customer repair instructions are solicited directly from other customers just like you who have purchased and replaced this exact part.
We need to fine sand product. We found out that paper with holes leave swirls. No holes doesn't .
Beverly - February 22, 2016
👍 3 of 3 people found this instruction helpful
Tool Type
Sander
Difficulty
Easy
Time
Less than 15 minutes
Tools Used
Screwdriver
Parts Used
Remove three screws from the pad with holes and remove. Then install the pad with no hole pads with the screws.
Did you find this story helpful?
Thanks for voting and helping fellow customers!
Sanding pad wore out
Jenni - July 26, 2018
👍 2 of 2 people found this instruction helpful
Tool Type
Sander
Difficulty
Easy
Time
Less than 15 minutes
Tools Used
Screwdriver
Parts Used
Removed screws, installed new pad and replaced screws. Good as new
Did you find this story helpful?
Thanks for voting and helping fellow customers!
Sander pad busted
Dennis - May 23, 2020
Tool Type
Sander
Difficulty
Easy
Time
Less than 15 minutes
Tools Used
Screwdriver
Parts Used
Removed three screws. Replaced pad and screws
Did you find this story helpful?
Thanks for voting and helping fellow customers!
the original sanding platform or the Porter Cable Random Orbital Sander became nonfunctional
Jack - March 7, 2019
Tool Type
Sander
Difficulty
Easy
Time
Less than 15 minutes
Tools Used
Screwdriver
Parts Used
1. Removed the three Phillips head screws holding the damaged sanding platform on the Porter Cable Random Orbital Sander;
2. Aligned the three thru holes on the Replacement Parts furnished sanding platform with the three threaded holes in the aluminum, belt-driven part of the Sander;
3. Hand-started each of the three Phillips screws to assure proper fit and avoid cross threading;
4. Tightened each screw until very loosely seated;
5. Started incrementally tightening each screw until each screw was tightly seated, then tightened.
6. Regularly during use I recheck the tightness of the three screws since, over time, they can loosen. I may consider using Locktight on the threads but would need to go buy some first.
2. Aligned the three thru holes on the Replacement Parts furnished sanding platform with the three threaded holes in the aluminum, belt-driven part of the Sander;
3. Hand-started each of the three Phillips screws to assure proper fit and avoid cross threading;
4. Tightened each screw until very loosely seated;
5. Started incrementally tightening each screw until each screw was tightly seated, then tightened.
6. Regularly during use I recheck the tightness of the three screws since, over time, they can loosen. I may consider using Locktight on the threads but would need to go buy some first.
Did you find this story helpful?
Thanks for voting and helping fellow customers!
Orbital sander pad was falling apart (20 years old)
Joseph - September 20, 2017
👍 1 of 2 people found this instruction helpful
Tool Type
Sander
Difficulty
Easy
Time
Less than 15 minutes
Tools Used
Screwdriver
Parts Used
Removed the 3 screws holding the pad on. Replaced them with the new pad in place.
Did you find this story helpful?
Thanks for voting and helping fellow customers!
The sander pad was torn.
Gordon - August 30, 2017
Tool Type
Sander
Difficulty
Easy
Time
Less than 15 minutes
Tools Used
Screwdriver
Parts Used
Loosened 3 screws, took them out and put on the new pad!
Did you find this story helpful?
Thanks for voting and helping fellow customers!
Replace Foam Pad on Dewalt Orbital Sander
Lynn - November 11, 2015
Tool Type
Sander
Difficulty
Easy
Time
Less than 15 minutes
Tools Used
Screwdriver
Parts Used
Remove the old pad by removing the 3 screws. Install the new one with the same screws. Simple. From the time I decided what I needed, found the part on ereplacementparts.com, ordered the part and had my sander back in use, it was less than four days. I am very happy with the service and will come here for all my replacement parts.
Did you find this story helpful?
Thanks for voting and helping fellow customers!
Pad was worn, sander vibrated because of it
Kyle - August 18, 2018
👍 0 of 1 people found this instruction helpful
Tool Type
Sander
Difficulty
Easy
Time
Less than 15 minutes
Tools Used
Screwdriver
Parts Used
Removed old pad and brake, put new ones on and away it goes. Just like new.
Did you find this story helpful?
Thanks for voting and helping fellow customers!
OEM stands for Original Equipment Manufacturer and means the part you’re buying is sourced directly from the manufacturer who made your product. At eReplacementParts, we sell only genuine OEM parts, guaranteeing the part you’re purchasing is of better design and of higher quality than aftermarket parts.
Our product descriptions are a combination of data sourced directly from the manufacturers who made your product as well as content researched and curated by our content & customer service teams. This content is edited and reviewed internally before being made public to customers.
Our customer service team are at the ready daily to answer your part and product questions. We have a dedicated staff with decades of collective experience in helping customers just like you purchase parts to repair their products.
All our part reviews are solicited directly from other customers who have purchased this exact part. While we moderate these reviews for profanity, offensive language or personally identifiable information, these reviews are posted exactly as submitted and no alterations are made by our team.
All our customer repair instructions are solicited directly from other customers just like you who have purchased and replaced this exact part. While we moderate these reviews for profanity, offensive language or personally identifiable information, these reviews are posted exactly as submitted and no alterations are made by our team.
Based on data from past customer purchasing behaviors, these parts are most commonly purchased together along with the part you are viewing. These parts may be necessary or helpful to replace to complete your current repair.
All our installation videos are created and produced in collaboration with our in-house repair technician, Mark Sodja, who has helped millions of eReplacementParts customers over the last 13 years repair their products. Mark has years of experience in selling and repairing both commercial and residential products with a specialty in gas-powered equipment.
This data is collected from customers who submitted a repair instruction after replacing this exact part. Customers can rate how easy the repair was to complete and how long it took. We aggregate this data to provide a repair rating that allows customers to quickly determine the difficulty and time needed to perform their own repair.
