Easy
15-30 minutes
This is an authentic Bostitch replacement part that has been sourced from the original manufacturer to be used with pneumatic finishing nailers. The safety cover is used to cover and prevent damage to the driver guide assembly. This item is available as an individual replacement part.
Safety Cover P0770002400
OEM part for: Bostitch, Porter Cable, Stanley
Part Number: P0770002400
$5.19
In Stock
Ships within 1 business day 
Jump To:
Frequently Purchased Together ?
Compatibility
This part will fit the following 13 machines
Bostitch
SB-2IN1 Finish Stapler View Diagrams & Manuals
SB-1850BN Finish Stapler View Diagrams & Manuals
SB1850BN (Type 0) 18ga Brad Nailer View Diagrams & Manuals
SB1850BN (Type 1) 18ga Brad Nailer View Diagrams & Manuals
BTFP1850K (Type 0) 18ga 2in Brad Nailer View Diagrams & Manuals
SWK1850BN (Type 0) Stanley Nailer 2-In. Brad To View Diagrams & Manuals
SB-1850BN (14065000 and Higher) Finish Tool Power Tool View Diagrams & Manuals
SB-1850BN (17179001) Finish Tool Power Tool View Diagrams & Manuals
SB-2IN1 (Type 0) Nailer Power Tool View Diagrams & Manuals
SB-2IN1 (Type 1) Nailer Power Tool View Diagrams & Manuals
Porter Cable
BN200SB (Type 1) 18-Gauge Brad Nailer View Diagrams & Manuals
BN200SB (17179001) Finish Nailer Power Tool View Diagrams & Manuals
Stanley
FMFP71928 (Type 0) 18ga 2# Brad Nailer View Diagrams & Manuals
Show More Compatible Models
This item works with the following types of products:
- Stapler Parts
- Nailer Parts
This part replaces obsolete part #: JS5082E1
Customer Part Reviews ?
Average Rating (out of 5):
Click to filter by ratings:
5 stars
5
4 stars
1
3 stars
0
2 stars
0
1 stars
0
< PREV
- 1
Amazing customer service thank you
Exactly what I needed
Guest -
November 25, 2022
Verified Purchase
Quick and easy
The part arrived when promised and was exactly what I needed and described. Very easy to replace.
Guest -
February 24, 2022
Verified Purchase
Skeptical no more!
Easy to order, priced right and shipped on time. Nailer works like new again.
Guest -
March 4, 2021
Verified Purchase
Glad I found this place to order parts.
Exactly as described and fit perfectly. Will definitely order all my replacement parts from here. Thank you
Guest -
July 29, 2020
Verified Purchase
Fit perfectly and easily installed
Exact fit as a replacement part and immediately cured the air leakage I was getting with cracked part. Thanks!
Guest -
June 10, 2020
Verified Purchase
The part works great. The postal service took 13 days to get the part from Utah to my home in Minnesota!
The USPS is terrible if a customer needed the part quickly! Jan 11th to Jan 24th is too long. Luckily I did not need the part for a while!
Guest -
January 27, 2023
Verified Purchase
t
t
t -
t days ago
Verified Purchase
eReplacementParts Team
t
Questions & Answers ?
Our customer Service team is at the ready daily to answer your part and product questions.
Ask our Team
We have a dedicated staff with decades of collective experience in helping customers just like you purchase parts to repair their products.
Does this fit my product?Questions & Answers for Safety Cover
No questions have been asked yet
Customer Repair Instructions ?
All our customer repair instructions are solicited directly from other customers just like you who have purchased and replaced this exact part.
Broken safety cover
Jefff - May 18, 2016
👍 2 of 2 people found this instruction helpful
Tool Type
Nailer
Difficulty
Easy
Time
Less than 15 minutes
Tools Used
, Allen wrench
Simple - Remove three screws and take the old cover off. Then install the new one with the three screws, and press the new pad on the safety.
Did you find this story helpful?
Thanks for voting and helping fellow customers!
Broken safety cover on brad nailer
Russ - November 30, 2015
👍 2 of 2 people found this instruction helpful
Tool Type
Nailer
Difficulty
Easy
Time
Less than 15 minutes
Tools Used
, allen wrench
Parts Used
I dropped my brad nailer and broke the safety cover, it was out of commission for a long time. Once I received the new part it was a simple matter to remove the allen head screws and replace the safety cover care should be taken to keep the loose safety parts in place while the new cover is installed.
Did you find this story helpful?
Thanks for voting and helping fellow customers!
The safety cover broke when I dropped the nailer.
Dale - April 25, 2016
👍 1 of 1 people found this instruction helpful
Tool Type
Nailer
Difficulty
Easy
Time
Less than 15 minutes
Tools Used
, allen wrench
I ordered the part and when it arrived, I removed three allen screws, mounted the new part and tightened the screws. I also replaced the safety pad. Easy repair!
Did you find this story helpful?
Thanks for voting and helping fellow customers!
Safety cover on nailer fractured during use
Dan - April 3, 2021
Tool Type
Nailer
Difficulty
Easy
Time
Less than 15 minutes
Tools Used
, Hex wrench
Parts Used
1) Disconnect air supply from gun
2) Remove nails remaining in nail gun magazine so the do not push driver out when removing safety cover
3) Removed two hex screws holding cover in place.
4) Removed broken safety cover
5) Install new safety cover
6) Install and Tighten hex screws
2) Remove nails remaining in nail gun magazine so the do not push driver out when removing safety cover
3) Removed two hex screws holding cover in place.
4) Removed broken safety cover
5) Install new safety cover
6) Install and Tighten hex screws
Did you find this story helpful?
Thanks for voting and helping fellow customers!
part cracked off
Ronald - March 1, 2019
Tool Type
Nailer
Difficulty
Easy
Time
Less than 15 minutes
Tools Used
Screwdriver, none
Parts Used
just put new one on
Did you find this story helpful?
Thanks for voting and helping fellow customers!
safety cover was damaged when dropped to floor
Othel - February 8, 2019
Tool Type
Nailer
Difficulty
Easy
Time
Less than 15 minutes
Tools Used
Screwdriver
Parts Used
Removed four screws, removed the damaged cover , replaced new cover, inserted the four screws and tightened.
Did you find this story helpful?
Thanks for voting and helping fellow customers!
Nail jam; screws stripped when I tried to remove cover.
John - September 16, 2018
Tool Type
Nailer
Difficulty
Medium
Time
More than 2 hours
Tools Used
Pliers, Power Drill, Allen wrench
Parts Used
1- Drilled out the screws
2- Removed damaged face plate.
3- Ordered new face plate and screws
4- Removed jam
5- Replaces new face plate
2- Removed damaged face plate.
3- Ordered new face plate and screws
4- Removed jam
5- Replaces new face plate
Did you find this story helpful?
Thanks for voting and helping fellow customers!
OEM stands for Original Equipment Manufacturer and means the part you’re buying is sourced directly from the manufacturer who made your product. At eReplacementParts, we sell only genuine OEM parts, guaranteeing the part you’re purchasing is of better design and of higher quality than aftermarket parts.
Our product descriptions are a combination of data sourced directly from the manufacturers who made your product as well as content researched and curated by our content & customer service teams. This content is edited and reviewed internally before being made public to customers.
Our customer service team are at the ready daily to answer your part and product questions. We have a dedicated staff with decades of collective experience in helping customers just like you purchase parts to repair their products.
All our part reviews are solicited directly from other customers who have purchased this exact part. While we moderate these reviews for profanity, offensive language or personally identifiable information, these reviews are posted exactly as submitted and no alterations are made by our team.
All our customer repair instructions are solicited directly from other customers just like you who have purchased and replaced this exact part. While we moderate these reviews for profanity, offensive language or personally identifiable information, these reviews are posted exactly as submitted and no alterations are made by our team.
Based on data from past customer purchasing behaviors, these parts are most commonly purchased together along with the part you are viewing. These parts may be necessary or helpful to replace to complete your current repair.
All our installation videos are created and produced in collaboration with our in-house repair technician, Mark Sodja, who has helped millions of eReplacementParts customers over the last 13 years repair their products. Mark has years of experience in selling and repairing both commercial and residential products with a specialty in gas-powered equipment.
This data is collected from customers who submitted a repair instruction after replacing this exact part. Customers can rate how easy the repair was to complete and how long it took. We aggregate this data to provide a repair rating that allows customers to quickly determine the difficulty and time needed to perform their own repair.
