Easy
15-30 minutes
This replacement rubber washer is secured under the throat plate helping to secure it. Over time it may deteriorate and get compressed eventually requiring replacement. It is a genuine item that is supplied directly from original equipment manufacturer for use with Delta table saws. Please note this durable rubber washer is sold individually.
Rubber Washer 1313226
OEM part for: Delta
Part Number: 1313226
$4.99
In Stock
Order within the next 8 hours and your part ships today! 
Jump To:
Frequently Purchased Together ?
Compatibility
This part will fit the following 13 machines
Delta
TS300 Type 1 Bench Table Saw View Diagrams & Manuals
TS300 Type 2 Bench Table Saw View Diagrams & Manuals
TS300 Type 3 Bench Table Saw View Diagrams & Manuals
TS350 Type 1 Bench Table Saw View Diagrams & Manuals
34-670 Type 1 10 Inch Table Saw View Diagrams & Manuals
34-670 Type 2 10 Inch Table Saw View Diagrams & Manuals
36-600 Type 1 Table Saw View Diagrams & Manuals
36-600 Type 2 Table Saw View Diagrams & Manuals
36-610 Type 2 Table Saw View Diagrams & Manuals
36-610 Type 1 Table Saw View Diagrams & Manuals
36-380 Type 1 Xl-10 Table Saw View Diagrams & Manuals
34-740 Type 2 Super 10 Saw View Diagrams & Manuals
34-740 Type 1 Super 10 Saw View Diagrams & Manuals
Show More Compatible Models
This item works with the following types of products:
- Saw Parts
- Table Saw Parts
Customer Part Reviews ?
Average Rating (out of 5):
Click to filter by ratings:
5 stars
1
4 stars
0
3 stars
2
2 stars
0
1 stars
0
< PREV
- 1
Washer upgrade.
Just like the original.
Craig -
March 10, 2020
Verified Purchase
Washers not as original
It appears the manufacturer changed the washers for my Delta blade insert, as the originals had a depression which fit the inserts form, while these do not. As such they don't allow the insert to fit flush with the table top. I'll try using my Dremel tool to carve out the appropriate depressions. I don't consider this issue a fault of ereplacementparts.
David -
July 12, 2023
Verified Purchase
A little disapointed
When the package arrived I expected to receive a pair of washers as they are used as two that need to level the insert. I guess I should have read the listing closer.
Guest -
June 12, 2020
Verified Purchase
t
t
t -
t days ago
Verified Purchase
eReplacementParts Team
t
Questions & Answers ?
Our customer Service team is at the ready daily to answer your part and product questions.
Ask our Team
We have a dedicated staff with decades of collective experience in helping customers just like you purchase parts to repair their products.
Does this fit my product?Questions & Answers for Rubber Washer
No questions have been asked yet
Customer Repair Instructions ?
All our customer repair instructions are solicited directly from other customers just like you who have purchased and replaced this exact part.
Guard was unusable
Thomas - November 12, 2021
Tool Type
Table Saw
Difficulty
Easy
Time
Less than 15 minutes
Tools Used
Screwdriver
Parts Used
replaced guard
Did you find this story helpful?
Thanks for voting and helping fellow customers!
needed washer to even top of table saw
walter - April 23, 2020
Tool Type
Table Saw
Difficulty
Easy
Time
Less than 15 minutes
Tools Used
Screwdriver
Parts Used
removed insert for blade aND INSTALLED NEW WASHER.
Did you find this story helpful?
Thanks for voting and helping fellow customers!
Slow motor speed, sparking
Charles - October 11, 2018
Tool Type
Table Saw
Difficulty
Easy
Time
30-60 minutes
Tools Used
Screwdriver
Parts Used
1) Unplug saw (very important)
2) Remove plate
3) Remove blade
4) Unscrew the upper brush cap (you may need to lower the motor slightly if you have larger hands)
5) Remove old brush
6) Use compressed air to clean brush contact area
7) Insert new brush
8) Screw on brush cap while compressing brush spring with other hand (the most difficult part of the process)
9) From under the saw, do the same procedure (4-8) on the lower brush
Note: You do not have to invert the saw and remove the base, like some videos show (although this might make it easier for people who cannot lie on their backs).
The old brushes were about half the length of the new ones. The failure appears to be from the lack of spring pressure when they are shorter, not the lack of brush material. Also the buildup of sawdust on the armature can reduce the contact area. If you need to use the saw while waiting for new brushes, you may be able to get more life from the old ones by just removing them and cleaning the contact area with compressed air.
2) Remove plate
3) Remove blade
4) Unscrew the upper brush cap (you may need to lower the motor slightly if you have larger hands)
5) Remove old brush
6) Use compressed air to clean brush contact area
7) Insert new brush
8) Screw on brush cap while compressing brush spring with other hand (the most difficult part of the process)
9) From under the saw, do the same procedure (4-8) on the lower brush
Note: You do not have to invert the saw and remove the base, like some videos show (although this might make it easier for people who cannot lie on their backs).
The old brushes were about half the length of the new ones. The failure appears to be from the lack of spring pressure when they are shorter, not the lack of brush material. Also the buildup of sawdust on the armature can reduce the contact area. If you need to use the saw while waiting for new brushes, you may be able to get more life from the old ones by just removing them and cleaning the contact area with compressed air.
Did you find this story helpful?
Thanks for voting and helping fellow customers!
OEM stands for Original Equipment Manufacturer and means the part you’re buying is sourced directly from the manufacturer who made your product. At eReplacementParts, we sell only genuine OEM parts, guaranteeing the part you’re purchasing is of better design and of higher quality than aftermarket parts.
Our product descriptions are a combination of data sourced directly from the manufacturers who made your product as well as content researched and curated by our content & customer service teams. This content is edited and reviewed internally before being made public to customers.
Our customer service team are at the ready daily to answer your part and product questions. We have a dedicated staff with decades of collective experience in helping customers just like you purchase parts to repair their products.
All our part reviews are solicited directly from other customers who have purchased this exact part. While we moderate these reviews for profanity, offensive language or personally identifiable information, these reviews are posted exactly as submitted and no alterations are made by our team.
All our customer repair instructions are solicited directly from other customers just like you who have purchased and replaced this exact part. While we moderate these reviews for profanity, offensive language or personally identifiable information, these reviews are posted exactly as submitted and no alterations are made by our team.
Based on data from past customer purchasing behaviors, these parts are most commonly purchased together along with the part you are viewing. These parts may be necessary or helpful to replace to complete your current repair.
All our installation videos are created and produced in collaboration with our in-house repair technician, Mark Sodja, who has helped millions of eReplacementParts customers over the last 13 years repair their products. Mark has years of experience in selling and repairing both commercial and residential products with a specialty in gas-powered equipment.
This data is collected from customers who submitted a repair instruction after replacing this exact part. Customers can rate how easy the repair was to complete and how long it took. We aggregate this data to provide a repair rating that allows customers to quickly determine the difficulty and time needed to perform their own repair.
