Easy
Less than 15 minutes
This authentic replacement plate is supplied directly from original equipment manufacturer. It is commonly used with Bosch miter saws. This rubber plate is used to secure the chute to the unit. Please note, this item is sold individually.
To complete this repair you would need a screwdriver.
• Remove the screws
• Replace old plate with a new one
• Reattach the screws
Rubber Plate 1609B00502
OEM part for: Bosch
Part Number: 1609B00502
$5.19
In Stock
Ships within 1 business day 
Jump To:
Product Description ?
- Classification: Part
- Weight: 0.02 lbs.
- Shipping: Ships Worldwide
Frequently Purchased Together ?
Compatibility
This part will fit the following 2 machines
Bosch
GCM12SD (3601F65010) Slide Miter Saw View Diagrams & Manuals
GCM12SD (3601F65011) Slide Mitre Saw View Diagrams & Manuals
This item works with the following types of products:
- Miter Saw Parts
- Saw Parts
Customer Part Reviews ?
Average Rating (out of 5):
Click to filter by ratings:
5 stars
4
4 stars
0
3 stars
0
2 stars
0
1 stars
1
< PREV
- 1
Tools are like lego for adults
I dropped my new 12" bosch mitre saw. they had all the parts to fix and a price much less then I thought and it was easy to fix.
Guest -
May 24, 2023
Verified Purchase
great part fit
great service
Guest -
March 29, 2023
Verified Purchase
Good experience
Correct parts, easy to find. Reasonable price, shipping cost acceptable.
Guest -
February 18, 2023
Verified Purchase
Exact Fit
This was exactly the same as the original part and fit perfectly.
Doug -
September 20, 2021
Verified Purchase
Still hasn’t arrived
I havent received the part yet, still waiting
Guest -
July 23, 2019
Verified Purchase
eReplacementParts Team
Hello Thomas, thank you for your review. We have emailed you in regards to this issue. We look forward to hearing from you.
t
t
t -
t days ago
Verified Purchase
eReplacementParts Team
t
Questions & Answers ?
Our customer Service team is at the ready daily to answer your part and product questions.
Ask our Team
We have a dedicated staff with decades of collective experience in helping customers just like you purchase parts to repair their products.
Does this fit my product?Questions & Answers for Rubber Plate
No questions have been asked yet
Customer Repair Instructions ?
All our customer repair instructions are solicited directly from other customers just like you who have purchased and replaced this exact part.
The chute and rubber deflextor broke off
Tim - February 1, 2016
👍 1 of 1 people found this instruction helpful
Tool Type
Miter Saw
Difficulty
Medium
Time
Less than 15 minutes
Tools Used
Screwdriver, Pliers, Adjustable Wrench
Parts Used
Remove the screws form the broken chute and install the new one. Then just hook the rubber plate on.
Did you find this story helpful?
Thanks for voting and helping fellow customers!
Rubber plate deteriorated
David - November 16, 2015
👍 1 of 1 people found this instruction helpful
Tool Type
Miter Saw
Difficulty
Easy
Time
Less than 15 minutes
Tools Used
, hands
Parts Used
Very easy to replace, just star by hooking the plate on one side and work your way around
Did you find this story helpful?
Thanks for voting and helping fellow customers!
Chute had been broken by a kickback
James - June 16, 2018
Tool Type
Miter Saw
Difficulty
Easy
Time
Less than 15 minutes
Tools Used
Screwdriver
Parts Used
Replaced chute and rubber plate. Very easy - 4 screws did it.
Did you find this story helpful?
Thanks for voting and helping fellow customers!
Chute broken by flying pieces of wood
Chris - December 8, 2017
Tool Type
Miter Saw
Difficulty
Easy
Time
Less than 15 minutes
Tools Used
Screwdriver
Simple to remove and replace. Four screws. Just to make it look new again.
Did you find this story helpful?
Thanks for voting and helping fellow customers!
A piece of wood broke the dust chute.
CHRIS - September 1, 2017
Tool Type
Miter Saw
Difficulty
Easy
Time
15-30 minutes
Tools Used
Screwdriver, Pliers
Parts Used
It was easy...removed the broken chute and put the new one on. This was a very easy repair. The replacement parts fit perfectly.
Did you find this story helpful?
Thanks for voting and helping fellow customers!
I broke the dust catching mechanism
Benjamin - December 21, 2016
Tool Type
Miter Saw
Difficulty
Easy
Time
Less than 15 minutes
Tools Used
Screwdriver
Parts Used
I took out the broken chute from the miter saw. I replaced it with the new chute and that fit great. I then attached the rubber plate to the chute. Fixed to just like new. Parts were great and fit great. I was happy and impressed with ereplacementparts.com
Did you find this story helpful?
Thanks for voting and helping fellow customers!
Dust collection chute was damaged
Mark - December 18, 2016
Tool Type
Miter Saw
Difficulty
Easy
Time
Less than 15 minutes
Tools Used
Screwdriver, Nutdriver
Parts Used
Removed damaged chute and replace it, then replaced the rubber chute. Easy
Did you find this story helpful?
Thanks for voting and helping fellow customers!
The chute cracked at the screw holes on the mounting plate.
Sven - November 30, 2016
Tool Type
Miter Saw
Difficulty
Easy
Time
Less than 15 minutes
Tools Used
Screwdriver, Pliers
Parts Used
1. Unscrewed mounting screws on top.
2. Held plastic pieces from the bottom with a pair of needle nose pliers, unscrewed them.
3. Installed new chute. Screwed in.
4. Stretched over new rubber plate.
5. EASY.
2. Held plastic pieces from the bottom with a pair of needle nose pliers, unscrewed them.
3. Installed new chute. Screwed in.
4. Stretched over new rubber plate.
5. EASY.
Did you find this story helpful?
Thanks for voting and helping fellow customers!
Shattered chute, worn out plate
David - October 26, 2016
Tool Type
Miter Saw
Difficulty
Easy
Time
Less than 15 minutes
Tools Used
Screwdriver
Parts Used
Removed the broken chute, then screwed the new chute back on. Then I hooked the rubber plate to the new chute.
Did you find this story helpful?
Thanks for voting and helping fellow customers!
Chute and rubber plate croke
Jon - August 29, 2016
Tool Type
Miter Saw
Difficulty
Easy
Time
15-30 minutes
Tools Used
Screwdriver
Parts Used
1. I replaced the plastic chute - very easy.
2. I used the rubber plate as a template and cut out a much larger one. It works much better a catching sawdust.
2. I used the rubber plate as a template and cut out a much larger one. It works much better a catching sawdust.
Did you find this story helpful?
Thanks for voting and helping fellow customers!
Load More Install Stories
OEM stands for Original Equipment Manufacturer and means the part you’re buying is sourced directly from the manufacturer who made your product. At eReplacementParts, we sell only genuine OEM parts, guaranteeing the part you’re purchasing is of better design and of higher quality than aftermarket parts.
Our product descriptions are a combination of data sourced directly from the manufacturers who made your product as well as content researched and curated by our content & customer service teams. This content is edited and reviewed internally before being made public to customers.
Our customer service team are at the ready daily to answer your part and product questions. We have a dedicated staff with decades of collective experience in helping customers just like you purchase parts to repair their products.
All our part reviews are solicited directly from other customers who have purchased this exact part. While we moderate these reviews for profanity, offensive language or personally identifiable information, these reviews are posted exactly as submitted and no alterations are made by our team.
All our customer repair instructions are solicited directly from other customers just like you who have purchased and replaced this exact part. While we moderate these reviews for profanity, offensive language or personally identifiable information, these reviews are posted exactly as submitted and no alterations are made by our team.
Based on data from past customer purchasing behaviors, these parts are most commonly purchased together along with the part you are viewing. These parts may be necessary or helpful to replace to complete your current repair.
All our installation videos are created and produced in collaboration with our in-house repair technician, Mark Sodja, who has helped millions of eReplacementParts customers over the last 13 years repair their products. Mark has years of experience in selling and repairing both commercial and residential products with a specialty in gas-powered equipment.
This data is collected from customers who submitted a repair instruction after replacing this exact part. Customers can rate how easy the repair was to complete and how long it took. We aggregate this data to provide a repair rating that allows customers to quickly determine the difficulty and time needed to perform their own repair.
