eReplacementParts.com
877-346-4814
Bostitch Parts
Repair Parts Home  Power Tool Parts  Bostitch Parts  AB-9038197 Rubber Foot
photo thumbnailphoto thumbnail360 degree photo thumbnail
Rubber Foot

Rubber Foot

Part Number: AB-9038197
BostitchDeWALTPorter Cable
Availability: 6 in stock
Price: $1.99
Order within the next 2 hours
and your part ships today!
Product Information
Manufacturer: Bostitch, DeWALT, Porter Cable
Product Number: AB-9038197
Classification: Part
Weight: 0.12 lbs.
Shipping: Ships Worldwide
Description:
Genuine Bostitch replacement part, it is sold individually.
The purpose of the Rubber foot is to cushion and keep the compressor models below from moving when in operation.
It is secured to the compressor by using part numbers AB-9412016 Washer and AB-9101315 Screw.
Products Compatibility

This item works with the following types of products:

  • • Compressor
Questions & Answers

What are the dimensions of this part?
Nick for model number AB 9038197 asked on 2019-05-16
Hello Nick, thank you for your inquiry! This part is approximately 2-1/3 W x 2-1/3 L. I hope this information helps!
Can you tell me inside diameter of the end of the boot?
Dan asked on 2019-11-20
Hello Dan and thanks for writing. We were not able to find the id of the foot, however Screw.?8X25 88 part # AB-9101315 is the one that would fit that foot. We really hope this helps. Please contact us anytime.
Repair Instructions: Submitted by Customers Like You
Tool Type:
Compressor
Parts Used:
Rubber Foot - AB-9038197
Air Filter - AB-9054017
Regulator - AB-9051202
Regulator Knob - AB-9038212
Repair Difficulty:
Easy
Time Spent Repairing:
Less than 15 minutes
Tools Used:
Socket set, Wrench Set
General repairs of broken and missing parts.
Installed new rubber foot. Installed new air filter on intake. Replaced regulator with new one because to old knob was missing. Very easy to replace. Didn't take long at all. Fast shipping. Very pleased with parts and selection.
Did you find this story helpful?
Thanks for voting and helping fellow customers!
Tool Type:
Compressor
Parts Used:
Rubber Foot - AB-9038197
Repair Difficulty:
Easy
Time Spent Repairing:
Less than 15 minutes
Tools Used:
Socket set
Rubber feet had torn off of the compressor
Took off bolts and replaced rubber feet
Did you find this story helpful?
Thanks for voting and helping fellow customers!
Tool Type:
Compressor
Parts Used:
Screw Hc W/Was.8X25 88 - AB-9101315
Rubber Foot - AB-9038197
Washer 8X24X2 - AB-9412016
Washer - AB-9134330
Nut M8 Zn - AB-9412015
Pressure Reducer - AB-9051116
Repair Difficulty:
Easy
Time Spent Repairing:
Less than 15 minutes
Tools Used:
Screwdriver, Socket set
Replace malfunctioning Valve and Missing rubber footing
Just a comment. I was able to get a list of the parts from the online schematic. After doing that, I ordered the parts above and within a few days, the parts arrived allowing me to do my repair. I was very pleased with the service.
Did you find this story helpful?
Thanks for voting and helping fellow customers!
Tool Type:
Compressor
Parts Used:
Washer - AB-9131540
Rubber Foot - AB-9038197
Washer - AB-9134330
Bolt - AB-9107334
Nut M8 - AB-9122341
Repair Difficulty:
Easy
Time Spent Repairing:
Less than 15 minutes
Tools Used:
Socket set, Adjustable Wrench
Rubber feet worn and missing
Removed what was left if the old rubber feet.
Placed the large washer on the bottom of the foot and pressed the bolt through the foot.
Placed the small washer on the compressor leg and tightened down the nut on the bolt.
Did you find this story helpful?
Thanks for voting and helping fellow customers!
Tool Type:
Compressor
Parts Used:
Valve Plate Assembly - AB-A640050
Rubber Foot - AB-9038197
Repair Difficulty:
Easy
Time Spent Repairing:
1-2 hours
Tools Used:
Screwdriver, Socket set, HEX KEYS
Compressor ran fine but no compressed air
Took it apart and found one of three reed valves broken. Looked up model on ereplacementparts and called to confirm part #. Ordered part ...Received them promptly , put back together charged it up for pressure test and it held 130 psi for 36 hours. I also replace the rubber feet on the compressor.
Great help thanks
Ron.
Did you find this story helpful?
Thanks for voting and helping fellow customers!
Reviews
5
Average Rating (out of 5):
1 Reviews
Click to filter by ratings:
5 stars
1
4 stars
0
3 stars
0
2 stars
0
1 stars
0
  • Highest Rating
  • Most Recent
< PREV
  • 1
NEXT >
  • Rubber foot fits correctly!
    Great to have all 4w feet on my pancake compressor again. Great service.
    Guest - January 28, 2020 Verified Purchase
    Verified Purchase
    eReplacementParts Team
    • Highest Rating
    • Most Recent
    < PREV
    • 1
    NEXT >
    Product Information
    Manufacturer: Bostitch, DeWALT, Porter Cable
    Product Number: AB-9038197
    Classification: Part
    Weight: 0.12 lbs.
    Shipping: Ships Worldwide
    Related Products
    eReplacementParts.com
    7036 South High Tech Dr.
    Midvale, UT 84047
    visa mastercard discover american express PayPal

    fancyboxy