866-322-9842
Mon-Fri 7am-1am EST
Sat-Sun 7am-11pm EST

Roller

Part Number: 286547
ProFormNordicTrackFreemotion
Availability: 25+ in stock
Price: $59.99
Quantity:
Ships within 1 business day
Description:
This is an original OEM part, it is sold individually.
The 286547 Roller is installed on the right and left Pedal Arm.
It purpose is to give a smooth run on the Elliptical as you are using it.
As with all ball bearings, because internally the turn metal to metal, they eventually will wear out, and will have to be replaced.
Product Information
Manufacturer: ProForm, NordicTrack, Freemotion
Product Number: 286547
Classification: Part
Weight: 0.19 lbs.
Shipping: Ships Worldwide
Compatibility

This part is compatible with the following machines:

NordicTrack
ProForm
Freemotion

Products Compatibility

This item works with the following types of products:

  • • Elliptical
Questions & Answers

No questions have been asked yet
Repair Instructions: Submitted by Customers Like You
6 of 7 people found this instruction helpful
Tool Type:
Elliptical
Parts Used:
Small Snap Ring - 243375
Roller - 286547
Repair Difficulty:
Easy
Time Spent Repairing:
Less than 15 minutes
Tools Used:
, Hex wrench
Roller broke.
The repair required removing arm screw and washers, sliding arm off, removing clip, replacing roller and new clip and reassemble.
Did you find this story helpful?
Thanks for voting and helping fellow customers!
Tool Type:
Elliptical
Parts Used:
Roller - 286547
Repair Difficulty:
Easy
Time Spent Repairing:
15-30 minutes
Tools Used:
Screwdriver
Roller ball needed replaced
Removed incline cover & left side track cover. Took off ball ,put on new & reassembled
Did you find this story helpful?
Thanks for voting and helping fellow customers!
Tool Type:
Elliptical
Parts Used:
Roller - 286547
Repair Difficulty:
Hard
Time Spent Repairing:
1-2 hours
Tools Used:
Screwdriver, Wrench Set, Allen wrenches, cotter pin remover.
Roller wheel fell apart due to age and needed replacement
There was no specific guidance from the Nordictrack book, so I started on one side. Removed the vertical and horizontal arm. Next, remove the plastic cover pieces (one at the head of the slider and the others above the wheel) above the wheel travel assembly exposing the wheel from the top. Rotate the arm up and back to get access to the wheel. There's a small pin on the back of the wheel that needs to be removed. Once the pin is removed, the wheel can be slid off and the new wheel replaced. Reverse the process to install the wheel. Repeat for the other side. Once both wheels are installed, replace the plastic covers. As the arms are reattached, grease any moving parts while you're there.
Did you find this story helpful?
Thanks for voting and helping fellow customers!
Tool Type:
Elliptical
Parts Used:
Roller - 286547
Repair Difficulty:
Easy
Time Spent Repairing:
Less than 15 minutes
Tools Used:
Screwdriver, Nutdriver
Roller had come apart from age and use. I purchased an extra roller because the other one will go soon.
Removed the arm from the track (had to remove two screws on a lower piece that holds them in), removed the old roller with a Philips screwdriver and put in the placed and then put it back together. Simple and easy. I had no idea I could even find another roller, but e-replacement has everything you could ever need.
Did you find this story helpful?
Thanks for voting and helping fellow customers!
Tool Type:
Elliptical
Parts Used:
Small Snap Ring - 243375
Roller - 286547
Repair Difficulty:
Easy
Time Spent Repairing:
Less than 15 minutes
Tools Used:
Screwdriver, Pliers
Roller broke.
Replaced the old roller with the new.
Did you find this story helpful?
Thanks for voting and helping fellow customers!
Tool Type:
Elliptical
Parts Used:
Roller - 286547
Repair Difficulty:
Easy
Time Spent Repairing:
Less than 15 minutes
Tools Used:
Screwdriver, Wrench Set
Ramp wheels making noises
Remove & replace both ramp wheels, also R&R upper right bushing
Did you find this story helpful?
Thanks for voting and helping fellow customers!
Tool Type:
Elliptical
Parts Used:
Roller - 286547
Repair Difficulty:
Easy
Time Spent Repairing:
Less than 15 minutes
Tools Used:
Screwdriver
Noise in ramp wheels
No instructions necessary remove wheels on my own easy to do
Did you find this story helpful?
Thanks for voting and helping fellow customers!
1 of 2 people found this instruction helpful
Tool Type:
Elliptical
Parts Used:
Roller - 286547
Repair Difficulty:
Medium
Time Spent Repairing:
15-30 minutes
Tools Used:
Screwdriver, Pliers
Nothing Wrong
1. Took Roller Cover with screwdriver and removed bar with roller.
2. Removed roller with pliers and screwdriver (removed clip)
3. Put on new roller putting clip back on with pliers and screwdriver
4. Replaced bar with roller and screwed back cover.
Did you find this story helpful?
Thanks for voting and helping fellow customers!
Tool Type:
Elliptical
Parts Used:
Roller - 286547
Repair Difficulty:
Medium
Time Spent Repairing:
Less than 15 minutes
Tools Used:
Screwdriver, Pliers, Retaining clip (snap -ring) pliers
Broken wheel
Remove the snap ring from the shaft
Removed the defective roller
Place the new roller on the shaft
Secured it with the snap ring
Did you find this story helpful?
Thanks for voting and helping fellow customers!
Tool Type:
Elliptical
Parts Used:
Roller - 286547
Repair Difficulty:
Easy
Time Spent Repairing:
Less than 15 minutes
Tools Used:
Screwdriver, Pliers
The roller was damaged.
Removed the damaged roller and replaced. Removed the front cover, with the screwdriver, Removed snap ring and damaged roller, replace with new roller, snap ring front cover and done.
Did you find this story helpful?
Thanks for voting and helping fellow customers!
Discussion
Discussion for Roller - ( 286547 )
Discussion is closed. To ask our experts a question about a part, use the Q&A feature.
Question: Treadmill

1196731

I need part 27- the wheel that the foot pad rides on. My wheel fell apart. L side.
WJA
Hello 1196731,

According to the manufacture, the roller you need to replace is part number 286547 Roller Assembly W/Bearings.

Hope this helps,
-WJA
Question: Material?

rdp55

Is this roller made of Kryptane? The original rolllers are made of a soft rubber that does not last....
Reviews
5
Average Rating (out of 5):
1 Reviews
Click to filter by ratings:
5 stars
1
4 stars
0
3 stars
0
2 stars
0
1 stars
0
  • Highest Rating
  • Most Recent
< PREV
  • 1
NEXT >
  • Quick install, worked as desired.
    My NordicTrack ASR1000 is back up and running. The wheel is not a perfect visual match to the original (who cares), but works just the same and was significantly cheaper than buying a new unit. I also replaced the outer washer and the locking clip but may have been able to reuse the originals.
    Dan - May 14, 2019 Verified Purchase
    Verified Purchase
    eReplacementParts Team
    • Highest Rating
    • Most Recent
    < PREV
    • 1
    NEXT >
    visa mastercard discover american express PayPal
    HACKER SAFE certified sites prevent over 99.9% of hacker crime.

    fancyboxy