eReplacementParts.com
877-346-4814
DeWALT Parts

Install
Videos!
Grid squares measure 1x1 inch

Ring,​​o 323711-34

Part Number: 323711-34
DeWALT
Availability: Usually ships in 7 - 12 business days
Price: $3.99
Leaves our warehouse within
7 - 12 business days
Product Information
Description:
O-rings are made to contain thousands of PSI pressure by creating a seal between two or more parts. O-ring measurements are defined by the inside diameter and the thickness.

Of the many causes for O-Ring failure, the most common among power tools are:
  • Extrusion and Nibbling – The O-ring has ragged, tattered edges. These are commonly caused by pressure spikes which shear off tiny “bites” from the o-ring, or caused by clearance gaps.
  • Abrasion – One or both sides of the o-ring appear rough and slightly flattened. Commonly caused by a contact surface that is too rough, contains grit or is too smooth to allow lubrication.
  • Over Compression – The O-ring is flattened on both sides and may have a “ring” split along its length. Commonly caused by excessive pressure or heat.
  • Heat Hardening – The O-ring has a pitted or cracked surface, and is often flattened on both sides. Caused by temperature exceeding o-ring capacity.
  • Weather/Ozone Cracking – The O-ring is covered in small surface cracks. Caused by exposure to ozone, UV rays and air pollution. Excessive seal stretching (greater that 5%) causes similar cracking.
  • Compatibility

    This part is compatible with the following machines:

    DeWALT
    Expand the 54 compatible machines
    Products Compatibility

    This item works with the following types of products:

    • • Drill
    • • Hammer Drill
    • • Rotary Hammer

    Questions & Answers for Ring,​o


    No questions have been asked yet
    Product Information
    eReplacementParts.com
    7174 South 400 West
    Suite 5
    Midvale, UT 84047
    visa mastercard discover american express PayPal