eReplacementParts.com
877-346-4815
DeLonghi Parts
Repair Parts Home  Appliance Parts  DeLonghi Parts  5313217701 5313217701 O-ring D=3

Install
Videos!
Grid squares measure 1x1 inch

5313217701 O-ring D=3 5313217701

Part Number: 5313217701
DeLonghi
Availability: In Stock
Price: $7.26
Order within the next 6 hours
and your part ships today!

*This part replaces obsolete part #: 5332199800, 5332154700 and 536369.

Product Information
Specifications
  • OD 5/16 Inch
  • ID 3/16 Inch
Description:
Genuine Delonghi replacement part, this item is sold individually.
This O-Ring is used as a seal to keep liquid from leaking between two connected parts.
Because of the heat that this part comes in contact with it does wear out often.
It is advised to have an extra one or two on hand.
Frequently Purchased With
Compatibility

This part is compatible with the following machines:

DeLonghi
BAR12FU Espresso/Cappuccino Maker
BAR32 Espresso/Cappuccino Maker
BAR41 Espresso/Cappuccino Maker
BAR42 Espresso/Cappuccino Maker
BAR42E Espresso/Cappuccino Maker
BAR52 Espresso/Cappuccino Maker
BCO264B Espresso/Cappuccino/Coffee Combo Cafe Nero
BCO264B Espresso/Cappuccino/Coffee Combo Cafe Nero
EAM3500 Magnifica
EAM3500.N Magnifica
EAM4500 Magnifica
ECO310BK Coffee Maker
EC140B Espresso Maker Black
EC155 Cappuccino Maker
EC270 Coffee Maker
EC460 Cappuccino Maker
EC610 Espresso/Cap Maker
EC700 Espresso Maker
EC701 Espresso Maker
EC702 Coffee Maker
EC710 Espresso Maker
EC730 Espresso Maker
ESAM3500.N Magnifica
ESAM4400 Magnifica
ESAM4500 Magnifica
ESAM5400 Coffee Maker
ESAM5500.B Coffee Maker
ESAM5500.M Coffee Maker
ESAM6600 Magnifica
ESAM6700 Magnifica
ECAM23210B Fully Automatic Coffee Maker
ECAM23450SL Compact Magnifica Beverage Center
EC860 Espresso Machine
ECAM22.110.SB Coffee Maker
EC330 Coffee Maker
EN520.S Latissima Plus Coffee Maker
ESAM5600 Coffee Makers
EC610 (132154001) Espresso Pump
ECO310BK Icona Pump Espresso Machine
ESAM3500N (0132215019)(X0132215019) Magnifica Digital Espresso And Coffee Machine
ESAM4400 (132214013) Coffee Maker
BAR12 (132103004) Espresso Pump
EC270 (132103085) Espresso Pump
ESAM6700 (132217008) Primadonna Avant
ECP3630 Pump Espresso
EAM3500 (0132215003) Magnifica Digital Super Automatic Espresso/Coffee Machine
EC685W Dedica Deluxe Manual Espresso Machine
ECAM23210SB (132213032) Magnifica S Automatic Espresso Machine
EC330 (132106032) Espresso Pump
ESAM2000 (132212063) Caffe Venezia Super Automatic
BAR41 (132151003) Retro Espresso/Cappuccino Maker
ESAM5500B (132215047) Perfecta Automatic Espresso, Cappuccino Maker
ESAM4500 (132215030) Fully Automatic Bean To Cup Machine
ECO310W (0132106089) Icona Manual Espresso Machine
BAR32 (132151022) Espresso Pump
EC860 Dedica Cappuccino Maker
ESAM5400 (132214023) Perfecta Espresso Machine
BCO430 Cappuccino Espresso And Coffee Maker
BAR42 (132152004) Espresso Pump
ECAM28465M (0132215217) Primadonna S Automatic Espresso Machine
BAR18 (132103076) Espresso Pump
ECAM22110B Magnifica Xs Automatic Espresso Machine
EC460 (132104080) Espresso Maker
ECAM45760B Superautomatic Cappuccino System
EC155 Espresso Coffee Maker
EN520BEX1 Nespresso Machine Black
ECAM23210B Magnifica S Automatic Espresso Machine
BAR42E (132152004) Espresso Pump
EC685BK Dedica Deluxe Manual Espresso Machine
EC140BEXC (132103072) Espresso Coffee Maker
ECP3220 Espresso Coffee Maker
EC140B (132103058) Espresso Coffee Maker
EC680R Dedica Manual Espresso Machine Red
ESAM6600 (132215018) Digital Super-Automatic Espresso Machine
EC680BK Dedica Manual Espresso Machine Black
ECAM23120SB Superautomatic Capachino System
EC701 (132154011) Espresso/Cappuccino Maker
ESAM5600SL (132215132) Perfecta Automatic Espresso Machine
ESAM5500M (132215043) Automatic Expresso Maker
ECP3420 Manual Espresso Machine
EN520B (0132193084) Nespresso Machine Black
ECAM23450SL (132215123) Magnifica Super Automatic Espresso/Cappuccino Machine
BCO264B (132552001) Cafe Nero Combo Coffee And Espresso Maker
ECAM28465MD Superautomatic Capachino System
ECAM26455M (132215147) Primadonna S De Luxe Ecam
ECAM25462S (0132215218) Cappuccino Maker
EC220CD (132151070) 15-Bar Pump Driven Espresso Maker
BCO430BM Cappuccino Espresso And Coffee Maker
EC685R Dedica Deluxe Manual Espresso Machine
ESAM6620 (132215101) Automatic Espresso Machine
ECAM22110SB Magnifica Xs Automatic Espresso Machine
ECAM23120SBS11 (0132213126) Coffee Maker
EAM4500 (132215010) Fully Automatic
BAR51 (132150000) Espresso/Cappuccino Maker
EC702 (132154017) Espresso/Cappuccino Maker
ESAM6900M (0132219002) Primadonna Exclusive Coffee Maker
BCO432 (132510002) Family Espresso Machine
EN520B (0132193083) Nespresso Machine Black
EC680M Dedica Manual Espresso Machine
ECAM23460 Magnifica S Automatic Espresso Machine
ECO310R (0132106088) Icona Manual Espresso Machine
EC685M Dedica Deluxe Manual Espresso Machine
ECAM23260 Magnifica Smart Cappuccino Machine
ECAM28465B Coffee Maker With Grinder
EN520R (5513290181) Nespresso Lattissima Plus Latte, Cappuccino, And Espresso
ECAM23260SB Magnifica S Smart Cappuccino Maker
ESAM04110S Magnifica Automatic Espresso Machine
Expand the 107 compatible machines
Products Compatibility

This item works with the following types of products:

  • • Coffee Maker
  • • Espresso

Questions & Answers for 5313217701 O-ring D=3


We are looking for the O ring for the frother. We are not sure which one to get. Please help! Thank you!
Phil for model number Delonghi ECAM22110 magnifica xs asked on 2023-12-20
Hi Phil, Thank you for your question. There is an o-ring, part number 5313220031, and an o-ring seal, part number 5313217751, used for the frother. We hope this helps!
eReplacementParts Team December 20, 2023
I am looking for a part number for the seal. I cannoy find the model number. Iy has the foamer on the side
Penni for model number Not sure. Type EC-155 serial #42022 asked on 2023-03-04
Hi Penni, Thank you for your question. If you are referring to the frother, the part number listed under your model number for it is 535789. If you would like to place an order for it, please call our customer service line and anyone will be happy to assist you. We look forward to hearing from you!
eReplacementParts Team March 04, 2023
Hello, I am looking for o-ring 5313217701, which you have listed on your website, however it should have OD 7.85mm, ID 3.85mm but you have diameters listed as 5/16 in and 3/18 in which is not the same. Please advise if you have an error in OD and ID description or you have error in part number.Thank you.
Oleg for model number Delonghi primadonna650.85 asked on 2023-01-12
Hi Oleg, Thank you for your question. The dimensions for this o-ring are 7.85 mm for the outer diameter and 3.85 mm for the inner diameter. If you need help placing an order for it, customer service is open 7 days a week and anyone will be happy to assist you. Please feel free to give us a call. We look forward to hearing from you!
eReplacementParts Team January 12, 2023
Repair Instructions: Submitted by Customers Like You
8 of 9 people found this instruction helpful
Tool Type:
Coffee Maker
Parts Used:
5313217701 O-ring D=3 - 5313217701
Repair Difficulty:
Easy
Time Spent Repairing:
15-30 minutes
Tools Used:
Screwdriver, Pliers
Water was leaking from a variety of connection points within my DeLonghi Magnifica Super Automatic Espresso machine
Remove sides, back, top and front control panel following video on eReplacementparts.com web site. Remove clips where tubes connect to generator and other interior machine parts, remove tube, remove old o-ring, replace with new o-ring, replace clips. Reassemble.
Did you find this story helpful?
Thanks for voting and helping fellow customers!
4 of 4 people found this instruction helpful
Tool Type:
Coffee Maker
Parts Used:
5313217701 O-ring D=3 - 5313217701
Repair Difficulty:
Medium
Time Spent Repairing:
Less than 15 minutes
Tools Used:
Pliers
Leaking water from the heating element connection to water pump when machine is brewing
I unplugged the machine and removed the water tank and water tank cover. Then, I unscrewed the two screws on top of the machine holding the main covers in place, and carefully pried the steam knob off. After that, taking the cover off the unit is a little tricky. There's a tab in the back that locks it into place and takes some finesse to not break while trying to take the cover off.

Once it's off however, I located the tube running from the water pump to the heating element, removed the alligator clip holding it in place, and carefully pulled the tube free from the connector. I had to fish the o ring out from the connector with a toothpick, but it was relatively easy. I then slipped the new o ring over the tube, re-inserted the tube very firmly into the connector, locked it in place with the alligator clip, and tested the machine for leaks. Once confident that the leaks were solved, I replaced the cover, steam knob, etc and screwed everything back into place.

Overall a very simple repair, just take your time and make sure to use common sense.
Did you find this story helpful?
Thanks for voting and helping fellow customers!
Tool Type:
Coffee Maker
Parts Used:
Spring - 6132101300
5313217701 O-ring D=3 - 5313217701
Filter - 6013213181
Generator Assembly - 7313213931
Spring - 6113210021
Repair Difficulty:
Medium
Time Spent Repairing:
More than 2 hours
Tools Used:
Screwdriver, Pliers, Wrench Set
The Delonghi 5400 machine started leaking water from the heater (generator)
I've had this machine for almost 10 years. 3 years ago it developed a leak. I looked at repairing it but the parts were not available at the time. We bought a new Delonghi (the 3300) and I kept the 5400 for parts as it looked like all the internal mechanical components were the same. We now purchased a cabin in the woods and wanted good coffee. These machines are pretty pricey these days so I decided to take a stab at repair again. Thanks to e-replacementparts I was able to get the parts I needed for a reasonable price. To get at the generator, first unplug the unit, then you need to remove all the outer housing panels (this should be obvious). Then the generator has 4 long machine screws holding it in place as well as 6 wires that need to be disconnected. Two are power, two are sensors and 2 are for a microswitch. I just followed the leads back to where they connected and took photos of where they plugged into so I could plug in the new generator. After unplugging the wires you'll need to remove the 4 long screws. A Phillips screwdriver and some needle nose players for the small nuts on the bottom. A couple of these nuts are hard to reach and you will need patience upon reassembly and nimble fingers. Once the screws are removed, there are two water connections to remove. they are held on by small metal clips. just pull the clip out with your pliers and the water line will come out. then remove the generator slowly. You will note a black rubber water (drain) connector on the underside of the unit opposite the side water connector. You will want to attach that one first upon putting in the new generator. Reassembly is as they say the opposite of removal. Some tips. Replace the o-rings on the two water lines (order them at the same time) or they will leak as I learned. Attach the black rubber drain line and the side water line before screwing the generator down. Once set in place put all the screws in loosely to get it lined up as it is a tight and precise fit. Get all of the screws tightened down - this is important as the generator is part of the coffee "press" and will be pushed up on when making coffee. After reassembly carefully put the water tank in (without the side panels on and start the machine and make a coffee or two. Use a flashlight to check for leaks around the generator. Be careful not to touch anything as the generator gets very very hot (it may smell a little hot at first use) and there are exposed electrical wires that pose a shock hazard. Once you confirm you have no leaks unplug again and put on the top and side panels. You are now good to go. Use this time to clean the unit thoroughly and lubricate the press o-rings with food grade lubricant. Good luck!
Did you find this story helpful?
Thanks for voting and helping fellow customers!
Tool Type:
Coffee Maker
Parts Used:
5313217701 O-ring D=3 - 5313217701
Repair Difficulty:
Medium
Time Spent Repairing:
30-60 minutes
Tools Used:
Screwdriver, Pliers, Socket set
a water leak from the pump hoses
remove the casing from the top, disconnect the hose with the water leak and replace the o-rings
Did you find this story helpful?
Thanks for voting and helping fellow customers!
Tool Type:
Coffee Maker
Parts Used:
5313217701 O-ring D=3 - 5313217701
Tube Ptfe Di2-de4 L=270 2bushe - 5513212881
Repair Difficulty:
Easy
Time Spent Repairing:
15-30 minutes
Tools Used:
Screwdriver, Pliers
Hose leaked, old washer
Opened machine
Took retaining clips off the hose
Applied silicone grease on the washer and replaced hose with new washers.
Very easy job.
Did you find this story helpful?
Thanks for voting and helping fellow customers!
Tool Type:
Coffee Maker
Parts Used:
5313217701 O-ring D=3 - 5313217701
Connection - 5332212900
Repair Difficulty:
Medium
Time Spent Repairing:
15-30 minutes
Tools Used:
Screwdriver, Pliers, small pick for O-ring removal
leaks
1. Removed water tank & used coffee catcher and tray.
2. Removed sides, back, and top panel.
3. Carefully make relief in wires, and water tubes
4. Remove 4 mounting screws and the generator assembly
5. Remove water connection to generator.
6. Remove and replace connector tail piece.
7. Reverse steps 5 through 1 in reverse order.
Did you find this story helpful?
Thanks for voting and helping fellow customers!
Tool Type:
Coffee Maker
Parts Used:
5313217701 O-ring D=3 - 5313217701
Knob - Ec700 - 5513271099
Repair Difficulty:
Medium
Time Spent Repairing:
15-30 minutes
Tools Used:
Screwdriver, Pliers, specialty screw driver
Leaking
I disassembled the unit to access the leaking tube. I have several of these machines so I was familiar with diagnosing and repairing the problem. The manufacturer has changed the screws to discourage DIY repairs so a bit of determination was needed. That is where the majority of the time was spent. I replaced those factory screws with x/ sheet metal screws. The old O-ring was accessed by removing a retaining pin. The new O-ring was installed and the unit was reassembled. The steam / coffee know is s simple pull of the old and push on the new.
Did you find this story helpful?
Thanks for voting and helping fellow customers!
Tool Type:
Coffee Maker
Parts Used:
5313217701 O-ring D=3 - 5313217701
Repair Difficulty:
Easy
Time Spent Repairing:
15-30 minutes
Tools Used:
Screwdriver
Leaking water
I removed the top of coffee maker. Turn coffee pot on temporarily ( careful not to touch wires). Water was dripping out of one oil ring. I replaced both of them. Coffee pot works like new.
Did you find this story helpful?
Thanks for voting and helping fellow customers!
Tool Type:
Coffee Maker
Parts Used:
5313217701 O-ring D=3 - 5313217701
Gasket - 5313228791
Tube With 2 Bushes (l230) - 5513216561
Repair Difficulty:
Hard
Time Spent Repairing:
30-60 minutes
Tools Used:
Screwdriver, pick or small hook
Coffee express start leak water
1.remove panels from coffee express using screwdriver.
2.using pick or small hook remove small spring washers from tube .
3.wiggle tube out from holders remove old rubber o-rings with pick or hook
4.install new o-rings on fed tub and reinstall new tub in holders reinstall spring washers on tube
5.reinstall all panels from coffee express .enjoy coffee .
Did you find this story helpful?
Thanks for voting and helping fellow customers!
Tool Type:
Coffee Maker
Parts Used:
5313217701 O-ring D=3 - 5313217701
Connection - 5332212900
Repair Difficulty:
Medium
Time Spent Repairing:
1-2 hours
Tools Used:
Screwdriver, Pliers, None
Espresso machine leaking
Identified section leaking
Tried several combinations of gaskets and O rings and finally stopped the leak
Did you find this story helpful?
Thanks for voting and helping fellow customers!
Reviews
4.4
Average Rating (out of 5):
7 Reviews
Click to filter by ratings:
5 stars
6
4 stars
0
3 stars
0
2 stars
0
1 stars
1
  • Highest Rating
  • Most Recent
< PREV
  • 1
NEXT >
  • I ring for steam wand
    Perfect fit
    Guest - May 25, 2023 Verified Purchase
    Coffee pot repair
    The o-ring fit perfectly. It was received in just a few days. My coffee maker is back to making a great cup.
    Guest - August 15, 2022 Verified Purchase
    "O" rings and tube
    I ordered two "O" rings and the tube connecting the pump to the pressure relief valve on my DeLonghi Espresso machine. I had been experiencing a leak in this area. These parts were a really snug fit and very easy to install. I have no further leaks and my machine is now back in tip top shape. Thank you eReplacement Parts.
    iGlobal - July 21, 2020 Verified Purchase
    Completely satisfied
    Work as expected, arrived quickly in Canada
    iGlobal - February 25, 2020 Verified Purchase
    Easy Repair
    After taking off the top, the tube was easy to access. Just remove the spring clip, pull out the tube end, fish out the old o-ring with a toothpick or other tool, then put the new O-Ring on the end of the tube and insert. Replace the spring clip and top and you are good to go.
    Guest - October 31, 2019 Verified Purchase
    It is the right part. No more water leaks.
    It arrived very quickly, no more water drip, thank you for your help ereplacementparts!!
    Nicholas - September 22, 2019 Verified Purchase
    Wrong parts
    It was not the right parts showing on your drawing I guess you guys assumed that what’s ever is in the other part of tube will be the same on the orther end, when I open my coffee maker it’s was different, I’m not sure if you guys have it because it’s not on the drawing that’s you guys providing
    Guest - December 30, 2019 Verified Purchase
    Verified Purchase
    eReplacementParts Team
    • Highest Rating
    • Most Recent
    < PREV
    • 1
    NEXT >
    Product Information
    eReplacementParts.com
    7174 South 400 West
    Suite 5
    Midvale, UT 84047
    visa mastercard discover american express PayPal