*This part replaces obsolete part #: 089110101223 and 089110102275.
Product Information
Description:
This is an authentic replacement part that has been sourced from the original manufacturer to be used with table saws from Ryobi and Ridgid. The plastic o-ring is used to provide spacing and to support the spindle shaft bearings within the gear box. This item is available as an individual replacement part. |
Frequently Purchased With
Compatibility
This part is compatible with the following machines:
the 19 compatible machines
Products Compatibility
This item works with the following types of products:
- • Saw
- • Table Saw
Questions & Answers for O Ring D29.6 X 1.2t
No questions have been asked yet
Repair Instructions: Submitted by Customers Like You
Tool Type:
Table Saw
Parts Used:
Repair Difficulty:
Hard
Time Spent Repairing:
More than 2 hours
Tools Used:
Screwdriver, Pliers, Wrench Set, Adjustable Wrench, Wheel puller, C ring pliers
Loud humming from bearing and brother screwed up bevel rod
Removed motor, pulled bearings. Replaced with new bearings. Removed shaft and other pieces. replace everything.
Did you find this story helpful?
Thanks for voting and helping fellow customers!
Tool Type:
Table Saw
Parts Used:
Repair Difficulty:
Medium
Time Spent Repairing:
30-60 minutes
Tools Used:
Screwdriver, Socket set, Wrench Set
Pinion gear on armature was stripped
1. Removed motor & armature 2.Replaced armature and installed the motor. 3. Screws that hold the motor on the saw were hard to get to.
Did you find this story helpful?
Thanks for voting and helping fellow customers!
Product Information