This authentic manufacturer rewind starter spring is a replacement part used in various power equipment engines. It is connected to a pulley system, and it is found inside the starter housing. It is a tightly wound metal spring that stores and releases energy to pull the starter rope back into the housing after starting the engine. If you are having difficulties starting the engine, or pulling and retracting the starter rope, then the rewind starter spring may be broken or worn down, and in need of replacement. It is recommended to replace the rope at the same time if it is frayed or worn down. Begin this repair by switching off the equipment for your safety. Disassemble the starter housing, and slowly unwind and remove the old spring. Position the new spring in the housing and tension it properly. Reassemble the housing to complete the repair.
- Part Type: Starter