Easy
Less than 15 minutes
This authentic item is supplied directly from the original equipment manufacturer for use with kitchen faucets made by Delta Faucet. The spout retainer attaches to the spout bonnet. When replacing this part a set of pliers might be required during the installation process. It will need to be replaced if it breaks. This item is sold individually and made of plastic.
Retainer - Spout RP21463
OEM part for: Delta Faucet
Part Number: RP21463
$10.71
In Stock
Ships within 1 business day 
Jump To:
Frequently Purchased Together ?
Compatibility
This part will fit the following 5 machines
Delta Faucet
2276-LHP H24 A24 Kitchen Faucet View Diagrams & Manuals
2274-LHP H24 A24 Kitchen Faucet View Diagrams & Manuals
2476-LHP H24 A24 Kitchen Faucet View Diagrams & Manuals
2176-LHP H24 A24 Kitchen Faucet View Diagrams & Manuals
474-SS Waterfall Pull-Out Kitchen Faucet View Diagrams & Manuals
This item works with the following types of products:
- Faucet Parts
Customer Part Reviews ?
Questions & Answers ?
Our customer Service team is at the ready daily to answer your part and product questions.
Ask our Team
We have a dedicated staff with decades of collective experience in helping customers just like you purchase parts to repair their products.
Does this fit my product?Questions & Answers for Retainer - Spout
No questions have been asked yet
Customer Repair Instructions ?
All our customer repair instructions are solicited directly from other customers just like you who have purchased and replaced this exact part.
Kitchen faucet neck would "launch" when water turned on
CT - June 19, 2016
👍 9 of 10 people found this instruction helpful
Tool Type
Faucet
Difficulty
Easy
Time
Less than 15 minutes
Tools Used
, knife
Parts Used
Removed faucet neck.
Removed worn plastic retainer and worn O-rings.
Snapped faucet neck in place.
Toughest part of job was identifying the 10 year-old faucet make and model. A patent number stamped on the neck revealed it was a Delta faucet. ereplacementparts.com had exploded-view schematics of various Delta faucets, and only one depicted the worn plastic retainer. The o-rings were also ordered as a precaution.
Removed worn plastic retainer and worn O-rings.
Snapped faucet neck in place.
Toughest part of job was identifying the 10 year-old faucet make and model. A patent number stamped on the neck revealed it was a Delta faucet. ereplacementparts.com had exploded-view schematics of various Delta faucets, and only one depicted the worn plastic retainer. The o-rings were also ordered as a precaution.
Did you find this story helpful?
Thanks for voting and helping fellow customers!
Old retainer was cracked and weak.
Morry - October 14, 2023
Tool Type
Faucet
Difficulty
Easy
Time
Less than 15 minutes
Tools Used
Screwdriver
Parts Used
1. Turn off faucet water.
2: Remove spout chrome escutcheon. Slide off of spout.
3.. Remove old plastic spout retainer.
4. Slide new plastic spout retainer over spout in same orientation until it clicks in place in the bottom groove of spout turret.
5) Replace escutcheon.
2: Remove spout chrome escutcheon. Slide off of spout.
3.. Remove old plastic spout retainer.
4. Slide new plastic spout retainer over spout in same orientation until it clicks in place in the bottom groove of spout turret.
5) Replace escutcheon.
Did you find this story helpful?
Thanks for voting and helping fellow customers!
Leak at base of spout
John - April 23, 2020
Tool Type
Faucet
Difficulty
Easy
Time
Less than 15 minutes
Tools Used
Screwdriver, Maybe screwdriver to pull o rings off. Plumbers grease on o
Parts Used
1. Slide spout collar up on spout
2.remove spout retainer
3.remove old o rings with flat screwdriver
4. Replace new o rings
5.apply plumbers grease to o rings
6.replace spout and retainer
7. Back collar back down around spout base
2.remove spout retainer
3.remove old o rings with flat screwdriver
4. Replace new o rings
5.apply plumbers grease to o rings
6.replace spout and retainer
7. Back collar back down around spout base
Did you find this story helpful?
Thanks for voting and helping fellow customers!
Faucet spout bar leaking
Nelson - July 12, 2018
Tool Type
Faucet
Difficulty
Easy
Time
15-30 minutes
Tools Used
, No tools used
Parts Used
Removed the faucet spout by pulling upward, removed the retainer and 2 O-rings. Replaced by pushing faucet spout back all the way down over retainer and O- rings to base of escutcheon.
Tested with no leaks. Thank you.
Tested with no leaks. Thank you.
Did you find this story helpful?
Thanks for voting and helping fellow customers!
Water leaking around base of faucet and ruining our wooden backsplash.
Dave - April 12, 2018
Tool Type
Faucet
Difficulty
Easy
Time
15-30 minutes
Tools Used
, Cleaning cloth & string
Parts Used
In my case the retaining clip was not broken but the o rings/seal leaked. I bought another retaining clip with the o ring set because I figured I'd break the old 20 year old clip. But to my surprise I didn't. To make a short story of it, what took the most time was cleaning everything before reassembling which I highly recommend. We have hard water and high magnesium ppm so this is what took the extra time. Be careful, make sure surfaces are clean and do not use anything sharp when trying to seat the o rings. It's very tempting to use a knife from the kitchen drawer. Use a piece of string and loop it around the o ring then pull string when trying to get them past the larger areas. Especially the bottom o ring. That's a learned trick, they don't teach u that in school.
Did you find this story helpful?
Thanks for voting and helping fellow customers!
OEM stands for Original Equipment Manufacturer and means the part you’re buying is sourced directly from the manufacturer who made your product. At eReplacementParts, we sell only genuine OEM parts, guaranteeing the part you’re purchasing is of better design and of higher quality than aftermarket parts.
Our product descriptions are a combination of data sourced directly from the manufacturers who made your product as well as content researched and curated by our content & customer service teams. This content is edited and reviewed internally before being made public to customers.
Our customer service team are at the ready daily to answer your part and product questions. We have a dedicated staff with decades of collective experience in helping customers just like you purchase parts to repair their products.
All our part reviews are solicited directly from other customers who have purchased this exact part. While we moderate these reviews for profanity, offensive language or personally identifiable information, these reviews are posted exactly as submitted and no alterations are made by our team.
All our customer repair instructions are solicited directly from other customers just like you who have purchased and replaced this exact part. While we moderate these reviews for profanity, offensive language or personally identifiable information, these reviews are posted exactly as submitted and no alterations are made by our team.
Based on data from past customer purchasing behaviors, these parts are most commonly purchased together along with the part you are viewing. These parts may be necessary or helpful to replace to complete your current repair.
All our installation videos are created and produced in collaboration with our in-house repair technician, Mark Sodja, who has helped millions of eReplacementParts customers over the last 13 years repair their products. Mark has years of experience in selling and repairing both commercial and residential products with a specialty in gas-powered equipment.
This data is collected from customers who submitted a repair instruction after replacing this exact part. Customers can rate how easy the repair was to complete and how long it took. We aggregate this data to provide a repair rating that allows customers to quickly determine the difficulty and time needed to perform their own repair.
