eReplacementParts.com
877-346-4814
Senco Parts
Preferred Partners of

Retainer

Part Number: BF0204
Senco
Availability: 25+ in stock
Price: $7.51
Ships within 1 business day
Product Information
Manufacturer: Senco
Product Number: BF0204
Classification: Part
Weight: 0.01 lbs.
Shipping: Ships Worldwide
Description:
Genuine OEM Piston Retainer for Senco Nailers. This part is made out of Plastic and is sold Individually. Over time due to constant pressure on this part, it will break or crack. Damaged Retainer would leak air and would need to be replaced for the Nailer to operate properly.
Frequently Purchased With
Compatibility

This part is compatible with the following machines:

Senco
Expand the 48 compatible machines
Products Compatibility

This item works with the following types of products:

  • • Nailer
Questions & Answers

No questions have been asked yet
Repair Instructions: Submitted by Customers Like You
8 of 9 people found this instruction helpful
Tool Type:
Nailer
Parts Used:
Retainer - BF0204
Repair Difficulty:
Easy
Time Spent Repairing:
Less than 15 minutes
Tools Used:
, allen wrench
Would not nail, air coming out the head
Unscrew the four bolts on top of the head. Remove the plastic retainer and replace with new one. Back to work.
Did you find this story helpful?
Thanks for voting and helping fellow customers!
2 of 2 people found this instruction helpful
Tool Type:
Nailer
Parts Used:
Retainer - BF0204
Repair Difficulty:
Easy
Time Spent Repairing:
Less than 15 minutes
Tools Used:
, Allen wrench set
Replaced plastic retainer in cylinder head
Very easy fix. I removed 4 screws from the top and removed the head. The retainer was screwed to the underside. Only a piece of the old one remained. I cleaned out the broken pieces, installed the new one, and put the head back on. Works like new.
Did you find this story helpful?
Thanks for voting and helping fellow customers!
2 of 2 people found this instruction helpful
Tool Type:
Nailer
Parts Used:
Seal - AC0141
Seal - BF0203
Retainer - BF0204
Repair Difficulty:
Easy
Time Spent Repairing:
30-60 minutes
Tools Used:
, Metric Allen wrench set and utility knife.
Replaced all o-rings and piston stops.
Download a parts breakdown of the Frame Pro 650 Senco that shows where all repair parts are located. Remove top housing cover to expose the internal parts. Use utility knife to get o-rings out of groves, wipe all debris off each part and install new o-rings. After o-rings are replaced replace the upper and lower stops. Assemble parts in the proper place. Put nails into the magazine, connect the air hose from a working air compressor. Check for air leaks, and test fire a few nails into suitable wood.

Worked like a charm!
Did you find this story helpful?
Thanks for voting and helping fellow customers!
1 of 1 people found this instruction helpful
Tool Type:
Nailer
Parts Used:
Retainer - BF0204
Repair Difficulty:
Medium
Time Spent Repairing:
30-60 minutes
Tools Used:
Wrench Set
The retainer disinagrated and it would not fire
removed the back cover, opened up the nailer, located the broken part, ordered 2 firing valves and some orings, cleaned it up reassembled and it worked.
Did you find this story helpful?
Thanks for voting and helping fellow customers!
1 of 1 people found this instruction helpful
Tool Type:
Nailer
Parts Used:
Retainer - BF0204
Repair Difficulty:
Medium
Time Spent Repairing:
Less than 15 minutes
Tools Used:
, Allen wrench
Leaking from the top of the gun
Remove the top, replace the retainer and clean all of the parts and pieces of the old retainer out of the gun. Very important that you get all of the pieces.
Replace the top.
Did you find this story helpful?
Thanks for voting and helping fellow customers!
1 of 1 people found this instruction helpful
Tool Type:
Nailer
Parts Used:
Retainer - BF0204
Repair Difficulty:
Easy
Time Spent Repairing:
15-30 minutes
Tools Used:
Wrench Set, allen wrench set
Would not set nails
1. Remove top of nail gun.
2. Part is in sight--remove and replace part.
3. Clean all of the broken parts from the gun , then oil the inside.
4. Reassemble the nail gun
Did you find this story helpful?
Thanks for voting and helping fellow customers!
Tool Type:
Nailer
Parts Used:
Retainer - BF0204
Seal - LB0844
Seal - LB0847
Repair Difficulty:
Easy
Time Spent Repairing:
Less than 15 minutes
Tools Used:
, Allen wrenches
Framing nail gun started leaking air from the trigger and then it started leaking from the top of the gun..
I pulled the top of the gun off then pulled the trigger assembly apart, replaced all the seals,then I pulled the retainer housing over the piston ,cleaned all the broken parts of the retainer ,then I replaced the retainer...reassembled the gun and it works perfectly again..
Did you find this story helpful?
Thanks for voting and helping fellow customers!
Tool Type:
Nailer
Parts Used:
Retainer - BF0204
Repair Difficulty:
Medium
Time Spent Repairing:
30-60 minutes
Tools Used:
Screwdriver, Allen tool
Frame Pro 600 nail gun Retainer and a Seal was bad, but its fixed know blowing air out of the top
Took the top of the gun off (4 allen screws) and one allen screw for the seal and the retainer just slip in. I looked at the picture of all the parts and how they went in the Gun. My Gun was blowing air out of the top and would not fire.
Did you find this story helpful?
Thanks for voting and helping fellow customers!
Tool Type:
Nailer
Parts Used:
Seal - BF0203
Retainer - BF0204
Repair Difficulty:
Medium
Time Spent Repairing:
15-30 minutes
Tools Used:
Screwdriver, Allen wrench
Failed to function. Air leak.
Removed and replaced seal and retainer.
Did you find this story helpful?
Thanks for voting and helping fellow customers!
Tool Type:
Nailer
Parts Used:
Seal - LB0036
Retainer - BF0204
Seal - LB0901
Repair Difficulty:
Easy
Time Spent Repairing:
15-30 minutes
Tools Used:
Socket set
leaking air thru exhaust port
removed back cover and replaced seals and retainer. assembled and tested. all good.
Did you find this story helpful?
Thanks for voting and helping fellow customers!
Reviews
5
Average Rating (out of 5):
6 Reviews
Click to filter by ratings:
5 stars
6
4 stars
0
3 stars
0
2 stars
0
1 stars
0
  • Highest Rating
  • Most Recent
< PREV
  • 1
NEXT >
  • THE REPAIR WAS A PIECE OF CAKE . 10 MIN FIX
    THE RETAINER FIT AS IT WAS MENT TO BE .I WOULD RECOMEND EREPLACEMENT PARTS TO ANYONE NEEDING TO REPAIR TOOLS AND ETC.
    Guest - May 4, 2021 Verified Purchase
    My nail gun parts fit great.
    The service was fast. The parts were the right ones. Job well done. I will be ordering again.
    Guest - April 7, 2021 Verified Purchase
    Just what I order work perfect
    Parts that I order work great, parts arrived very very quick. Would use ereplacement parts again
    Guest - November 24, 2020 Verified Purchase
    Easy repair
    Part arrived on time, in good condition my nail gun is operative again
    Guest - April 21, 2020 Verified Purchase
    Easy repair
    This retainer was exactly what I needed!
    Guest - March 16, 2020 Verified Purchase
    great parts supplier
    I FOUND ALL THE PARTS I NEEDED. QUICK SHIPPING, TOLL WAS BACK IN ACTION IN LESS THAN A WEEK.
    lonnie - February 12, 2020 Verified Purchase
    Verified Purchase
    eReplacementParts Team
    • Highest Rating
    • Most Recent
    < PREV
    • 1
    NEXT >
    Product Information
    Manufacturer: Senco
    Product Number: BF0204
    Classification: Part
    Weight: 0.01 lbs.
    Shipping: Ships Worldwide

    Fixing things makes sense...

    ...And we make it easy! With our Fix app, you always have a personalized repair guide on-hand. Easily find manuals and replacement parts on your phone while you’re DIYing in the garage or garden.

    "Love the flexibility of the app to add everything in the home and garage. Access to manuals and parts right there makes it convenient."

    Available on the App Store Get it on Google Play
    eReplacementParts.com
    7036 South High Tech Dr.
    Midvale, UT 84047
    visa mastercard discover american express PayPal