866-322-9842
Mon-Fri 7am-1am EST
Sat-Sun 7am-11pm EST
Repair Parts Home  Outdoor Recreation Parts  Power Wheels Parts  00801-1939 Retainer Cap Nut

Retainer Cap Nut

Part Number: 00801-1939
Power Wheels
Availability: 25+ in stock
Price: $1.14
Quantity:
Ships within 1 business day

*This part replaces obsolete part #: 0081-1939, 00801-1451 and 0801-0226.

Description:
This is a genuine Power Wheels replacement part, it is sold individually.
The purpose of the Cap Nut is to secure the wheels on the models shown below.
When removing this part it usually will be damaged in the process.
It is advisable to order a few extra to keep on hand.
Product Information
Manufacturer: Power Wheels
Product Number: 00801-1939
Classification: Part
Weight: 0.01 lbs.
Shipping: Ships Worldwide
Products Compatibility

This item works with the following types of products:

  • • ATV
  • • Exercise Bike
  • • Motorcycle
  • • Saw
Questions & Answers

No questions have been asked yet
Repair Instructions: Submitted by Customers Like You
10 of 15 people found this instruction helpful
Tool Type:
Motorcycle
Parts Used:
Retainer Cap Nut - 00801-1939
Wheel - B7659-2459
Repair Difficulty:
Easy
Time Spent Repairing:
15-30 minutes
Tools Used:
Pliers, hammer
Replaced four tires and lug nuts
Place the wheels on the shaft and tap on the cap nuts to secure them
Did you find this story helpful?
Thanks for voting and helping fellow customers!
8 of 12 people found this instruction helpful
Tool Type:
Motorcycle
Parts Used:
Retainer Cap Nut - 00801-1939
Drive Wheel - 74290-2269
Repair Difficulty:
Easy
Time Spent Repairing:
15-30 minutes
Tools Used:
Screwdriver, Hammer
Tires were worn out.
Removed the old tires and put on the new ones. Had to remove a fender on each side. Had to take the caps off the axle to remove the tires. Slid the wheels off and put on the new ones with the new caps. Replaced the fenders.
Did you find this story helpful?
Thanks for voting and helping fellow customers!
6 of 9 people found this instruction helpful
Tool Type:
Motorcycle
Parts Used:
Drive Wheel - 74290-2269
Retainer Cap Nut - 00801-1939
Repair Difficulty:
Easy
Time Spent Repairing:
15-30 minutes
Tools Used:
Pliers, Hammer, screwdriver
The tires on the PowerWheels motorcycle were worn down.
Unscrewed the plastic casing. Took off the push nut. Removed the old tire and replaced with the new tire. Placed a new push nut (removing the old nut broke it). Screwed the plastic casing back on.
Did you find this story helpful?
Thanks for voting and helping fellow customers!
6 of 9 people found this instruction helpful
Tool Type:
Motorcycle
Parts Used:
Retainer Cap Nut - 00801-1939
Repair Difficulty:
Easy
Time Spent Repairing:
Less than 15 minutes
Tools Used:
, Hammer
The cap nut was stripped
I simply tapped the capnut into place with a hammer
Did you find this story helpful?
Thanks for voting and helping fellow customers!
2 of 4 people found this instruction helpful
Tool Type:
Motorcycle
Parts Used:
Retainer Cap Nut - 00801-1939
Rim Inner, Rear - J5248-2389
Right Motor Gear Box w/Lower Harness - J5248-9779
Mtrgrbx Assy W/O Wires - 00968-2923
Repair Difficulty:
Easy
Time Spent Repairing:
15-30 minutes
Tools Used:
Screwdriver, Pliers, Hammer
Power wheels atv wheels not turning correcly.
Removed wheels. Changed gearbox and motor on both sides. Removed and replaced with new inner rim on both sides. Placed everything back together finishing with the retainer cap nut. 2004 atv working like new.
Did you find this story helpful?
Thanks for voting and helping fellow customers!
6 of 12 people found this instruction helpful
Tool Type:
Motorcycle
Parts Used:
Retainer Cap Nut - 00801-1939
Left Wheel - J4390-2279
Right Wheel - J4390-2289
Repair Difficulty:
Easy
Time Spent Repairing:
Less than 15 minutes
Tools Used:
Pliers, Hammer
Wheels worn out
This fix was replacing two rear wheels for a child's Power Wheels Mustang. Easy as pie!! I removed one retainer cap, pulled the wheel off and pulled the axle with other wheel off and replaced the wheel. Put the axle back through and put right tire on and put on new retainer cap. DONE in less that 2 minutes. I will be back again if I ever need a replacement part. THANKS!!!!!!
Did you find this story helpful?
Thanks for voting and helping fellow customers!
5 of 10 people found this instruction helpful
Tool Type:
Motorcycle
Parts Used:
Retainer Cap Nut - 00801-1939
Repair Difficulty:
Easy
Time Spent Repairing:
Less than 15 minutes
Tools Used:
Needed to replace the wheel cap.
Put on the new cap by tapping it with a hammer.
Did you find this story helpful?
Thanks for voting and helping fellow customers!
5 of 10 people found this instruction helpful
Tool Type:
Motorcycle
Parts Used:
Retainer Cap Nut - 00801-1939
Repair Difficulty:
Medium
Time Spent Repairing:
30-60 minutes
Tools Used:
Screwdriver, Hammer
Power wheels F150 front wheel spindle bent
By removing several phillips head screws and wheel caps..module removes as one piece. Then reverse the disassembly procedure.
Did you find this story helpful?
Thanks for voting and helping fellow customers!
3 of 6 people found this instruction helpful
Tool Type:
Motorcycle
Parts Used:
Retainer Cap Nut - 00801-1939
Left Wheel - G3740-2409
Footboard Assembly - N8417-9209
Repair Difficulty:
Medium
Time Spent Repairing:
30-60 minutes
Tools Used:
Screwdriver, Hammer, Wire cutter, Crimper
Drive wheels were worn out, Footboard was corroded.
Power Wheels Escalade. Replaced the drive wheels and the footboard. Grand daughter test drove. Passed!
Did you find this story helpful?
Thanks for voting and helping fellow customers!
1 of 2 people found this instruction helpful
Tool Type:
Motorcycle
Parts Used:
Retainer Cap Nut - 00801-1939
Drive Wheel - 74290-2269
Repair Difficulty:
Easy
Time Spent Repairing:
15-30 minutes
Tools Used:
Screwdriver, Pliers, Hammer
Both drive wheels were ruined when I purchased this motorcycle used. It was pretty easy finding the best parts at the best price.
I used a pair of pliers and a hammer to remove the cap nut. The wheel came off and I pulled out the axle. I than removed the other wheel. Replaced the wheel, put the axle back on and than put the other wheel on. I used a hammer to tap on the cap nut.
Did you find this story helpful?
Thanks for voting and helping fellow customers!
Discussion
Discussion for Retainer Cap Nut - ( 00801-1939 )
Discussion is closed. To ask our experts a question about a part, use the Q&A feature.
Question: Cap Nut

timmy

what is the inside diameter of this cap nut
will it fit the steering wheel of the f-150 c3493
WJA
Hello timmy,

The part number 0801-0226 has a diameter of .437 but it is not the cap nut for the the steering wheel. The cap nut for it is part number 0801-0604 it has a diameter of .354

Hope this helps,
-WJA
Reviews
5
Average Rating (out of 5):
3 Reviews
Click to filter by ratings:
5 stars
3
4 stars
0
3 stars
0
2 stars
0
1 stars
0
  • Highest Rating
  • Most Recent
< PREV
  • 1
NEXT >
  • great part
    I didn't expect to ever find the parts for my grand daughters "Barbie Jeeps". OEM parts at a very reasonable price.
    Guest - 28 days ago Verified Purchase
    Easy repair
    Great condition. Fast shipping . My kids atv is working like new
    Jasiel - April 23, 2019 Verified Purchase
    Part fit great
    The part was new and arrived not damaged
    Guest - April 19, 2019 Verified Purchase
    Verified Purchase
    eReplacementParts Team
    • Highest Rating
    • Most Recent
    < PREV
    • 1
    NEXT >
    visa mastercard discover american express PayPal
    HACKER SAFE certified sites prevent over 99.9% of hacker crime.

    fancyboxy