Toaster: Won't Turn on
If your toaster won't turn on, don't throw it out just yet. Spare the environment, and try fixing it yourself, it's easier than you might think. Start with checking the following parts: the fuse, element, and control board. Use our guide to help you through a DIY repair.
Fuses
If your toaster will not turn on, check the safety fuse, also known as the thermal fuse. The fuse prevents fires by cutting off power to the elements. If the fuse is not working properly it can get suck in the off setting and will not turn on. Check to ensure the fuse is not burnt out, if it is, replace it with a new fuse if it is.
If your toaster will not turn on, check the safety fuse, also known as the thermal fuse. The fuse prevents fires by cutting off power to the elements. If the fuse is not working properly it can get suck in the off setting and will not turn on. Check to ensure the fuse is not burnt out, if it is, replace it with a new fuse if it is.
Find your Fuses here
Elements
If your element, also known as a cooking compartment, or cooking grid is burnt out, it can cause trouble turning on your toaster. Replace your element if it is damaged or burnt out and make sure to clean it to avoid trouble turning on your toaster.
If your element, also known as a cooking compartment, or cooking grid is burnt out, it can cause trouble turning on your toaster. Replace your element if it is damaged or burnt out and make sure to clean it to avoid trouble turning on your toaster.
Find your Elements here
Control Boards
If one of the units on the circuit board in your toaster is burnt, it can affect the toaster from turning on and will need to be replaced. To install a new circuit board, flip the base of the toaster down and unscrew the base with a Phillips screwdriver. Next, flip the toaster back up and support the bottom as you remove the top. You can now access the board and disconnect the cable connector from the toaster by pulling it away from the board. Lastly, unscrew all screws that attach the board to the cover and remove it. Install the new board and reassemble toaster.
If one of the units on the circuit board in your toaster is burnt, it can affect the toaster from turning on and will need to be replaced. To install a new circuit board, flip the base of the toaster down and unscrew the base with a Phillips screwdriver. Next, flip the toaster back up and support the bottom as you remove the top. You can now access the board and disconnect the cable connector from the toaster by pulling it away from the board. Lastly, unscrew all screws that attach the board to the cover and remove it. Install the new board and reassemble toaster.
Find your Control Boards here
