Laminate Trimmer Repair
If your laminate trimmer isn't working at peak performance, and you need help diagnosing the problem, take a look below at the most common symptoms associated with this tool. If you are unsure of the part that is causing the issue, not to worry, our experts have provided likely parts and how to detect the problem on your own. Your laminate trimmer will be back up and running in no time.
Won't turn on
Reported 35% of the time
When your laminate trimmer won't turn on, that can be frustrating, but luckily there are many common fixes that can be done on your own. Our experts recommend inspecting the switch, carbon brushes, power cord, armature, and field. Once you have located the part where the issue is stemming from, read our repair tips for how you can fix it, it might be easier than you think.
Base doesn't lock firmly
Reported 16% of the time
Is the base not locking firmly on your laminate trimmer? We suggest inspecting these parts for damage: the base, knob, nuts. lever, and support pin. Let us guide you through the repair process by providing digestible information on how you can fix your tool. Reference your owner's manual for instructions relating to your specific model.
Grinding or squealing sound
Reported 13% of the time
If your trimmer is making grinding or squealing sounds, it clearly isn't working as efficiently and effectively as it should be. Check the bearings, carbon brushes, and fan. Save time and money by fixing it yourself, using our expert repair guide. Reference your owner's manual for instructions based on your model.
Bad vibration
Reported 9% of the time
Is your laminate trimmer experiencing bad vibration? This can make the tool hard to control. Check the bearings, base, fan, carbon brush, router bit, and collet. If you notice any damage, it might be time for a repair. Use our repair guide for tips on fixing your tool yourself. Refer to your owner's manual for detailed instruction.
Excessive sparks from motor
Reported 6% of the time
Excessive sparks coming from the motor of your laminate trimmer can seem concerning, but it is actually something you can fix yourself. First, check out the parts we have listed below as being the most commonly related to this problem. Once you have the part narrowed down, use our repair guide to get your tool back to working effectively on your own.
Bit slips from chuck
Reported 6% of the time
If the bit slips from the chuck on your laminate trimmer, not to worry, you only have 3 parts to check. The collet, shaft, and collet nut are the most likely parts that are usually associated with this problem. Once you have the part pinpointed, try fixing it yourself using our expert repair guide. Refer to your owner's manual for instructions specific to your model.
Base won't adjust or bind
Reported 5% of the time
If the base won't adjust or bind on your laminate trimmer, check the base, knobs, and motor housing. Fixing the problem yourself is faster and easier with some help from us. Read our repair guide for instructions on how to fix your tool yourself. Always reference your owner's manual for instructions specific to your model.
Spindle lock doesn't work
Reported 4% of the time
If the spindle lock doesn't work on your laminate trimmer, check the pins, springs, and buttons. Try fixing your tool on your own with help from our expert repair guide. Reference your owner's manual for advice tailored to your model.
Motor gets hot
Reported 3% of the time
If the motor of your laminate trimmer gets hot, handle with care. Wait until it has completely cooled off before you begin any repairs. Once it has cooled, check the fan, carbon brushes, bearings, armature, field, and cooling ports. If you notice damage to a particular part, read on for further repair advice on how you can fix it. Refer to your owner's manual for information relating specifically to your model.
