Jointer Repair
If your jointer is experiencing any of the symptoms we have listed below, it might be time to repair it. Once you have narrowed down the symptom that applies to your situation, review our suggested parts that are commonly associated with the problem at hand. Our expert technicians have compiled easy-to-follow instructions on how you can repair your jointer and have it working effectively again.
Doesn't cut smoothly
Reported 26% of the time
A jointer that doesn't cut smoothly can be frustrating. We can help! We have narrowed down the most common parts that can cause a rough cut. Check the knives, bars, bearings, and table for any signs of malfunction. Once you have figured out which part needs to be repaired, review our tips for how you can fix your jointer yourself. Read your owner's manual for detailed instructions on your model.
Won't turn on
Reported 19% of the time
If your jointer won't turn on, not to worry, it doesn't mean the end of its life. Our expert technicians have put together the most common parts that are related to this problem. Once you have figured out which part is causing the problem, let us walk you through the DIY repair process. Read our easy-to-follow instructions on how to fix your jointer, you might be surprised how easy it is.
Tables won't adjust up or down
Reported 13% of the time
If your jointer's table won't adjust up or down, inspect the following parts for wear and tear: the knobs, blocks, clamps, levers, ball crank and adjusting screw. Read on for repair advice that corresponds with the part that needs to be fixed. Reference your owner's manual for instructions relating to your model.
Bad vibration
Reported 12% of the time
Is the precision of your jointer being impacted by bad vibration? Check for damage or wear and tear on the following parts: the belt, pulley, bearings, and bars. Try completing the repair yourself by following our expert troubleshooting guide. Refer to your owner's manual for detailed instructions on your model.
Fence won't lock in place or maintain proper angle setting
Reported 9% of the time
If the fence won't lock in place or maintain a proper angle setting, check the handle, fence, and clamp. Use our repair guide for tips on how to fix your jointer yourself, saving you on the hassle of having to call a professional. Refer to your owner's manual for model specific advice.
Motor spins but cutterhead doesn't
Reported 4% of the time
If your jointer's motor spins but the cutter head doesn't, not to worry, we can help. First, review our suggested parts for this type of problem. Once you have the part narrowed down, read our guide for tips on completing the repair yourself. Check your owner's manual for instructions specific to your model.
Squeaking or squealing sound from the cutter head
Reported 3% of the time
If you hear squeaking or squealing sounds coming from the cutter head of your jointer, it could be one of two parts. Check the bearings and belt for signs of damage. Use our expert repair advice to fix your jointer yourself, much more efficient and less costly than hiring someone. Check your owner's manual for advice tailored to your model.
