Espresso Machine: Doesn't Produce Steam
If your espresso machine doesn't produce steam, we can help you fix it. Our experts have narrowed down the likely parts to the nozzle, seal, handle, valve, and switch. Once you have pinpointed the part that is causing the problem, read our troubleshooting guide for tips on how you can make the repair yourself. Refer to your owner's manual for specific advice on your model.
Handles
The handles on an espresso machine can affect the production of steam only if it is attached to the valve that controls the steam output. If the handle has a defect or is damaged, make sure to replace it for better results.
The handles on an espresso machine can affect the production of steam only if it is attached to the valve that controls the steam output. If the handle has a defect or is damaged, make sure to replace it for better results.
Find your Handles here
Nozzles
If the nozzle in your espresso machine is clogged, it can prevent it from producing steam. This can happen when dried milk builds up to the point that it does not allow hot water to come out. Tip: it is important to clean the nozzle periodically. Use a straight pin to remove dried milk from the nozzle, then put it back onto the steam valve before tightening the screw.
If the nozzle in your espresso machine is clogged, it can prevent it from producing steam. This can happen when dried milk builds up to the point that it does not allow hot water to come out. Tip: it is important to clean the nozzle periodically. Use a straight pin to remove dried milk from the nozzle, then put it back onto the steam valve before tightening the screw.
Find your Nozzles here
Switches
If your espresso machine does not produce steam, but the valves as well, as the seal, are in good condition, then check your switch. The switch for most machines works in conjunction with a valve and communicates with the circuit board when to go into steam mode. If the switch is worn out, it will not turn on and turn off randomly in some instances. If your machine experiences this, make sure to replace your switch.
If your espresso machine does not produce steam, but the valves as well, as the seal, are in good condition, then check your switch. The switch for most machines works in conjunction with a valve and communicates with the circuit board when to go into steam mode. If the switch is worn out, it will not turn on and turn off randomly in some instances. If your machine experiences this, make sure to replace your switch.
Find your Switches here
Valves
The valve in your espresso machine can fail in three ways. One way is that even though the valve is closed, water still flows through. Another way is because of build of water deposits, the valve stays stuck open and lastly the valve does the opposite and will not open to allow water to go through. All the above failures can cause your espresso machine to not produce steam. Replace your valve for better results.
The valve in your espresso machine can fail in three ways. One way is that even though the valve is closed, water still flows through. Another way is because of build of water deposits, the valve stays stuck open and lastly the valve does the opposite and will not open to allow water to go through. All the above failures can cause your espresso machine to not produce steam. Replace your valve for better results.
Find your Valves here
O-Rings
If the seal, also known as O-ring or gasket, is not installed correctly in your espresso machine it can cause resistance in the flow of steam and will not produce any steam. The most common cause for a seal interrupting the production of steam is it worn out or damaged and begins to leak out of the system instead of coming out of the frothier. It is easiest to check seal, before any part to ensure it is secured and tight enough on espresso machine. If not, replace your seal immediately for better results.
If the seal, also known as O-ring or gasket, is not installed correctly in your espresso machine it can cause resistance in the flow of steam and will not produce any steam. The most common cause for a seal interrupting the production of steam is it worn out or damaged and begins to leak out of the system instead of coming out of the frothier. It is easiest to check seal, before any part to ensure it is secured and tight enough on espresso machine. If not, replace your seal immediately for better results.
Find your O-Rings here
