Quick Fix: How to Replace the Shaver Heads on a Norelco Electric Shaver

Before beginning your repair, make sure you have the correct parts by viewing our Norelco shaver parts page.
Replacing the shaver head

1. Remove the shaver head

Open the shaver by pressing the button at base of the head. Then simply pull the shaver head away from the body.

2. Unlock the cutters from the head

Remove the cutters from the head by turning the locking piece counter clockwise. Then pull it away from the shaver head.

3. Remove the cutters from the shaver head

Now you can remove the cutters from the shaver head.

4. Replace the cutters

Each cutter will have metal tabs and a bump of metal on the edge to indicate the proper installation position. Align the bump of metal towards the center of the head and set each cutter in its designated spot.

5. Replace the cutter lock

Place the cutter lock loops over each one of the cutters. Then twist the center of the cutter lock clockwise to secure the cutters to the head.

6. Snap the cover head back onto the shaver 

Then just snap the cover head back onto the shaver and get after that five o'clock shadow.

 
[Back to Top]
Conclusion And that's how easy it is to replace your cutters and keep your shaver working and cutting like it's brand new. And remember, we have parts for more than just shavers. Check out our appliance parts page to find parts for all the products that keep your house humming. 
  [Back to Top] What We're About