Genuine OEM Reciprocating Saw Shaft Kit used on some Reciprocating Saws. Includes the Shaft, Blade Clamp Assembly, Shoe, Lever Assembly and Hardware. This is the Main Piece that Holds and Drives the Blade.
Reciprocating Saw Shaft Replac N302139
OEM part for: DeWALT, Black and Decker
Part Number: N302139
Jump To:
Frequently Purchased Together ?
Compatibility
This part will fit the following 27 machines
DeWALT
Black and Decker
This item works with the following types of products:
- Reciprocating Saw Parts
- Saw Parts
This part replaces obsolete part #: 616363-00, 616343-01, 616340-00, N064499SV, 396016-00, 616356-00, N064499, 616360-00
Customer Part Reviews ?
- 1
- 2
Questions & Answers ?
Our customer Service team is at the ready daily to answer your part and product questions.
Ask our Team
We have a dedicated staff with decades of collective experience in helping customers just like you purchase parts to repair their products.
Does this fit my product?Questions & Answers for Reciprocating Saw Shaft Replac
Customer Repair Instructions ?
All our customer repair instructions are solicited directly from other customers just like you who have purchased and replaced this exact part.
The "head" that holds and releases the blade was broken. The part was only available as part of the shaft repair kit.
Tool Type
Reciprocating Saw
Difficulty
Easy
Time
30-60 minutes
Tools Used
Screwdriver, Pliers, screws were star or torx
Parts Used
Shaft blade lock came apart. Broken
Tool Type
Reciprocating Saw
Difficulty
Easy
Time
15-30 minutes
Tools Used
Screwdriver
Parts Used
Remember to add new grease to the shaft .
Latch wasn't holding saw blades
Tool Type
Reciprocating Saw
Difficulty
Easy
Time
Less than 15 minutes
Tools Used
Screwdriver, Allen wrench
Parts Used
Blade lock not holding blade securely.
Tool Type
Reciprocating Saw
Difficulty
Easy
Time
Less than 15 minutes
Tools Used
Screwdriver
Parts Used
Shaft broke
Tool Type
Reciprocating Saw
Difficulty
Medium
Time
15-30 minutes
Tools Used
Screwdriver, Socket set, Nutdriver
Parts Used
Blade holder was junk.
Tool Type
Reciprocating Saw
Difficulty
Medium
Time
15-30 minutes
Tools Used
Screwdriver, Pliers, Socket set
Parts Used
Blade attachment head broke
Tool Type
Reciprocating Saw
Difficulty
Easy
Time
30-60 minutes
Tools Used
, T20 and T25 bits to remove and remount 10 screws
Parts Used
2. Installed replacement arm and head.
3. Realized new head was too large for original saw case to fit on the saw. My saw was an early model with a small one direction blade mount head. The replacement provided in the kit enables mounting the blade in 4 possible orientations, but the new head is larger than the part replaced.
4. Decided to buy new saw case with the properly sized hole for $12 rather than enlarge hole in the original case. Wish I understood this issue when I bought the new arm kit. But the second wait time was worth it because the new case makes the saw look brand new.
5. After waiting for the 2nd shipment to arrive. The new case was installed and the saw was completely repaired and the blade mounting was much improved over the original design.
Worn shaft and bearing.
Tool Type
Reciprocating Saw
Difficulty
Easy
Time
30-60 minutes
Tools Used
Screwdriver
Lost the ball bearing that holds the blade in place
Tool Type
Reciprocating Saw
Difficulty
Easy
Time
Less than 15 minutes
Tools Used
Screwdriver
I found that the part for the (DW304P pn302139) is basically the same part.
The only difference is that the shaft for the DW303M has only one position for the blade that is vertical with the saw.
The DW304P has two slots for the blade to fit both Vertical and Horizontal.
Lucky that I had both of these saws and was able to compare before I purchased the part for the DW304P to fit my DW 303M saw.
I only wish that they would have had a foot note stating that there was an alternative part. This would have saved me some time. Other than that the replacement was very easy. Don't forget to grease it well while you have it apart.
The Shaft had excessive play due, to worn Bearing, causing difficulty when changing Blades.
Tool Type
Reciprocating Saw
Difficulty
Easy
Time
30-60 minutes
Tools Used
Screwdriver, T-20 & T-25 Torx Driver
OEM stands for Original Equipment Manufacturer and means the part you’re buying is sourced directly from the manufacturer who made your product. At eReplacementParts, we sell only genuine OEM parts, guaranteeing the part you’re purchasing is of better design and of higher quality than aftermarket parts.
Our product descriptions are a combination of data sourced directly from the manufacturers who made your product as well as content researched and curated by our content & customer service teams. This content is edited and reviewed internally before being made public to customers.
Our customer service team are at the ready daily to answer your part and product questions. We have a dedicated staff with decades of collective experience in helping customers just like you purchase parts to repair their products.
All our part reviews are solicited directly from other customers who have purchased this exact part. While we moderate these reviews for profanity, offensive language or personally identifiable information, these reviews are posted exactly as submitted and no alterations are made by our team.
All our customer repair instructions are solicited directly from other customers just like you who have purchased and replaced this exact part. While we moderate these reviews for profanity, offensive language or personally identifiable information, these reviews are posted exactly as submitted and no alterations are made by our team.
Based on data from past customer purchasing behaviors, these parts are most commonly purchased together along with the part you are viewing. These parts may be necessary or helpful to replace to complete your current repair.
All our installation videos are created and produced in collaboration with our in-house repair technician, Mark Sodja, who has helped millions of eReplacementParts customers over the last 13 years repair their products. Mark has years of experience in selling and repairing both commercial and residential products with a specialty in gas-powered equipment.
This data is collected from customers who submitted a repair instruction after replacing this exact part. Customers can rate how easy the repair was to complete and how long it took. We aggregate this data to provide a repair rating that allows customers to quickly determine the difficulty and time needed to perform their own repair.