This is an original replacement part manufactured for use with Jet drum sanders. The special receptacle is used to provide an outlet to connect a vacuum or dust collection system. This receptacle is available as an individual replacement part, please see model diagram for associative parts.
Receptacle 72-2120
OEM part for: Jet
Part Number: 72-2120
Compatibility
This part will fit the following 4 machines
Jet
This item works with the following types of products:
- Sander Parts
Questions & Answers ?
Our customer Service team is at the ready daily to answer your part and product questions.
Ask our Team
We have a dedicated staff with decades of collective experience in helping customers just like you purchase parts to repair their products.
Does this fit my product?Questions & Answers for Receptacle
Customer Repair Instructions ?
All our customer repair instructions are solicited directly from other customers just like you who have purchased and replaced this exact part.
The power receptacle died
Tool Type
Sander
Difficulty
Easy
Time
Less than 15 minutes
Tools Used
Screwdriver, Pliers
Parts Used
Basically there were four screws in the sand-smart box (I think it was four)... removing those, and loosening the allen set screw holding the motor inside onto the shaft of the roller, and the whole top part comes of. Pulling the old receptacle out was a bit of a challenge... ended up using pliers and breaking off the holder tabs. Once it was out, this one snapped right in, and I reconnected the wires and it was done. Pretty simple.
The old receptacle wouldn’t hold the plug in enough to make a good contact
Tool Type
Sander
Difficulty
Easy
Time
15-30 minutes
Tools Used
, Needle nose pliers wire crimped/stripper
Parts Used
Switch shorted out
Tool Type
Sander
Difficulty
Easy
Time
30-60 minutes
Tools Used
Screwdriver, Socket set
Parts Used
Power receptacle failure
Tool Type
Sander
Difficulty
Easy
Time
15-30 minutes
Tools Used
Screwdriver, Wrench Set, Nutdriver, Allen wrenches
Parts Used
Removed electrical component cover
Disconnected motor coupling
Removed motor
Unplugged wires to receptacle
Replaced receptacle
and reconnected wires
Receptacle went bad on my sander and needed replacing
Tool Type
Sander
Difficulty
Easy
Time
Less than 15 minutes
Tools Used
Screwdriver, Socket set
Parts Used
Previous owner burned out power receptacle
Tool Type
Sander
Difficulty
Easy
Time
Less than 15 minutes
Tools Used
Screwdriver, Pliers
Parts Used
Burned out receptacle for sanding drum
Tool Type
Sander
Difficulty
Medium
Time
15-30 minutes
Tools Used
Screwdriver, Pliers, Socket set
Parts Used
2. Removed the old part
3. Installed the new part
The plug shorted out
Tool Type
Sander
Difficulty
Easy
Time
15-30 minutes
Tools Used
Pliers
Parts Used
OEM stands for Original Equipment Manufacturer and means the part you’re buying is sourced directly from the manufacturer who made your product. At eReplacementParts, we sell only genuine OEM parts, guaranteeing the part you’re purchasing is of better design and of higher quality than aftermarket parts.
Our product descriptions are a combination of data sourced directly from the manufacturers who made your product as well as content researched and curated by our content & customer service teams. This content is edited and reviewed internally before being made public to customers.
Our customer service team are at the ready daily to answer your part and product questions. We have a dedicated staff with decades of collective experience in helping customers just like you purchase parts to repair their products.
All our part reviews are solicited directly from other customers who have purchased this exact part. While we moderate these reviews for profanity, offensive language or personally identifiable information, these reviews are posted exactly as submitted and no alterations are made by our team.
All our customer repair instructions are solicited directly from other customers just like you who have purchased and replaced this exact part. While we moderate these reviews for profanity, offensive language or personally identifiable information, these reviews are posted exactly as submitted and no alterations are made by our team.
Based on data from past customer purchasing behaviors, these parts are most commonly purchased together along with the part you are viewing. These parts may be necessary or helpful to replace to complete your current repair.
All our installation videos are created and produced in collaboration with our in-house repair technician, Mark Sodja, who has helped millions of eReplacementParts customers over the last 13 years repair their products. Mark has years of experience in selling and repairing both commercial and residential products with a specialty in gas-powered equipment.
This data is collected from customers who submitted a repair instruction after replacing this exact part. Customers can rate how easy the repair was to complete and how long it took. We aggregate this data to provide a repair rating that allows customers to quickly determine the difficulty and time needed to perform their own repair.