Quad Force Blade Drive Assembl 20659
Part Number: 20659
Order within the next 13 hours
and your part ships today!
and your part ships today!
*This part replaces obsolete part #: 20658, S20656 and S20651.
Product Information
Description:
This is an OEM part from Andis. The Blade Drive is used on many Andis clippers. This part is used to drive the cutter on the blades to cut hair. This part should be replaced if any of the flexible tabs have broken loose or if the tip has worn out. Included with this part is instructions on how to correctly replace the Blade Drive. Tools used: • Philips Head Screw Drivers • Flat Head Screw Drivers (To help pry old part off) |
Frequently Purchased With
Compatibility
the 58 compatible machines
This part is compatible with the following machines:
Andis
MBG 120V Clipper
MBG2 (20995) 120V Clipper
AG 120V Clipper
BG 120V Clipper
AG2 2-Speed 120V Clipper
AG2 (SUPPER) 2-Speed 120V Clipper
BG2 2-Speed 120V Clipper
BG2 (GOLD) 2-Speed 120V Clipper
BGC2 2-Speed 120V Clipper
BGC 120V Clipper
BGRV (63100) 120V Clipper
BGCL 120V Clipper
BGR 120V Clipper
BGR+ 120V Clipper
SMC 5-Speed Animal Clippers
AGR+ Super 120V Clipper
AGRC (63970) 120V Clipper
AGC2 (22445) 2-Speed 120V Clipper
AGC2 (SUPER) 2-Speed 120V Clipper
AGR 120V Clipper
AGRV 63360 120V Clipper
AGP 120V Clipper
AGCL 120V Clipper
AGC 120V Clipper
AGC2 (ULTRAEDGE) 2-Speed Clipper
AGC2 (EQUINE) 2-Speed Clipper
AGC2 (22330) 2-Speed Clipper
AGC2 (23085) 2-Speed Clipper
AGC2 (64575) 2-Speed Clipper
MBG2 (20995) 120V Clipper
AG 120V Clipper
BG 120V Clipper
AG2 2-Speed 120V Clipper
AG2 (SUPPER) 2-Speed 120V Clipper
BG2 2-Speed 120V Clipper
BG2 (GOLD) 2-Speed 120V Clipper
BGC2 2-Speed 120V Clipper
BGC 120V Clipper
BGRV (63100) 120V Clipper
BGCL 120V Clipper
BGR 120V Clipper
BGR+ 120V Clipper
SMC 5-Speed Animal Clippers
AGR+ Super 120V Clipper
AGRC (63970) 120V Clipper
AGC2 (22445) 2-Speed 120V Clipper
AGC2 (SUPER) 2-Speed 120V Clipper
AGR 120V Clipper
AGRV 63360 120V Clipper
AGP 120V Clipper
AGCL 120V Clipper
AGC 120V Clipper
AGC2 (ULTRAEDGE) 2-Speed Clipper
AGC2 (EQUINE) 2-Speed Clipper
AGC2 (22330) 2-Speed Clipper
AGC2 (23085) 2-Speed Clipper
AGC2 (64575) 2-Speed Clipper
BGC (22310) 2-Speed Clipper
BGC-2 (22315) 2-Speed Clipper
BGR Plus (64850) 120 Volt Clipper
SMC-2 (63220) 120 Volt Clipper
AGC (22350) ProClip Detachable Blade
AGC (22545) ProClip Detachable Blade
AGC (23835) ProClip Detachable Blade
AGC2 (22760) ProClip UltraEdge Detachable Blade
AGC2 (24080) ProClip UltraEdge Detachable Blade
AGC2 (24085) ProClip UltraEdge Detachable Blade
AGC2 (22405) ProClip UltraEdge Detachable Blade
AGC2 (22465) ProClip UltraEdge Detachable Blade
AGC2 (22585) ProClip UltraEdge Detachable Blade
AGC2 (22360) ProClip UltraEdge Detachable Blade
AGC2 (22340) ProClip UltraEdge Detachable Blade
BGRC (67356) Professional Detachable Blade
BGRC (63700) Professional Detachable Blade
SMC (63205) ProClip Excel 5-Speed
SMC (65255) ProClip Excel 5-Speed
SMC (65285) ProClip Excel 5-Speed
SMC (65290) ProClip Excel 5-Speed
SMC (65410) ProClip Excel 5-Speed
AGR+ (64800) CeramicEdge/ Size 10
AGR+ (65340) CeramicEdge/ Size 40SS
AG2 (22215) UltraEdge/ Size 10
AG2 (22235) UltraEdge/ Size 10
MBG2 (21420) Ceramic/ Size 10/ 120V
MBG2 (65785) Carbon-Steel/ Size 10 / 120V
MBG2 (21485) Carbon-Steel/ Size 10 / 120V
BGC-2 (22315) 2-Speed Clipper
BGR Plus (64850) 120 Volt Clipper
SMC-2 (63220) 120 Volt Clipper
AGC (22350) ProClip Detachable Blade
AGC (22545) ProClip Detachable Blade
AGC (23835) ProClip Detachable Blade
AGC2 (22760) ProClip UltraEdge Detachable Blade
AGC2 (24080) ProClip UltraEdge Detachable Blade
AGC2 (24085) ProClip UltraEdge Detachable Blade
AGC2 (22405) ProClip UltraEdge Detachable Blade
AGC2 (22465) ProClip UltraEdge Detachable Blade
AGC2 (22585) ProClip UltraEdge Detachable Blade
AGC2 (22360) ProClip UltraEdge Detachable Blade
AGC2 (22340) ProClip UltraEdge Detachable Blade
BGRC (67356) Professional Detachable Blade
BGRC (63700) Professional Detachable Blade
SMC (63205) ProClip Excel 5-Speed
SMC (65255) ProClip Excel 5-Speed
SMC (65285) ProClip Excel 5-Speed
SMC (65290) ProClip Excel 5-Speed
SMC (65410) ProClip Excel 5-Speed
AGR+ (64800) CeramicEdge/ Size 10
AGR+ (65340) CeramicEdge/ Size 40SS
AG2 (22215) UltraEdge/ Size 10
AG2 (22235) UltraEdge/ Size 10
MBG2 (21420) Ceramic/ Size 10/ 120V
MBG2 (65785) Carbon-Steel/ Size 10 / 120V
MBG2 (21485) Carbon-Steel/ Size 10 / 120V
Products Compatibility
This item works with the following types of products:
- • Hair Clipper
Questions & Answers for Quad Force Blade Drive Assembl
No questions have been asked yet
Repair Instructions: Submitted by Customers Like You
5 of 6 people found this instruction helpful
Tool Type:
Hair Clipper
Parts Used:
Repair Difficulty:
Easy
Time Spent Repairing:
Less than 15 minutes
Tools Used:
Screwdriver
Blade drive broke
The new part includes instruction on how to install it. Thank you.
Did you find this story helpful?
Thanks for voting and helping fellow customers!
1 of 1 people found this instruction helpful
Tool Type:
Hair Clipper
Repair Difficulty:
Medium
Time Spent Repairing:
1-2 hours
Tools Used:
Screwdriver, Pliers, Small tip soldering iron, solder, knife, sm hammer.
Blade drive broke, broken brush holders and intermittent turnoff.
Took apart, cleaned with silicone oil, brake cleaner and air. Replaced the blade drive, need the right size screwdrivers. Normal brush replacement. The circuit card had cracks in the etches on both of the line connectors. After soldering the connectors and repairing the cracks, clippers worked well. The circuit card is weak at the connectors due the the card being so thin. Probably should replace the circuit card at some point in the future if it fails. Plastic housing screw holders were weak so I had to enforce them to get the screws tight, plastic is very thin and brittle. I suspect next time I do repair Ill need both plastic housing pieces, circuit card and whatever else wears out. The brush holder plastic screws were partly broken so I had to us small chisel/knife to break it out w/o destroying the housing, although the old brushes were still in good shape. Plastic components become brittle with use, heat and time, its plastic. Internals like the motor, switch, armature are superior as compared to the housings. Blades are very durable, light plastic hard to work with, lightweight, but not very durable.
All in all not a bad repair job, if I was to pay somebody labor..... better to buy new pair.
All in all not a bad repair job, if I was to pay somebody labor..... better to buy new pair.
Did you find this story helpful?
Thanks for voting and helping fellow customers!
1 of 1 people found this instruction helpful
Tool Type:
Hair Clipper
Parts Used:
Repair Difficulty:
Easy
Time Spent Repairing:
Less than 15 minutes
Tools Used:
Screwdriver
Drive broke, clipper blades wouldn't move
Replaced the drive. Easy to do. Screwdriver needed to remove the top of the clipper body to get to the drive part.
Did you find this story helpful?
Thanks for voting and helping fellow customers!
Tool Type:
Hair Clipper
Repair Difficulty:
Medium
Time Spent Repairing:
15-30 minutes
Tools Used:
Screwdriver
Clipper not cutting well and would not always change speed when switch was moved.
Opened clipper case and replaced motor control board. Reassembled clipper body. Then removed blade holder screws and blade holder. Cleaned out excess dog hair. Took of Blade Drive cover as it just snaps on and off. Removed two screws holding blade drive. Installed new blade drive and screws and then snapped cover back on.
Did you find this story helpful?
Thanks for voting and helping fellow customers!
Tool Type:
Hair Clipper
Repair Difficulty:
Easy
Time Spent Repairing:
Less than 15 minutes
Tools Used:
Screwdriver, Pliers
Three speed switch was malfunctioning. Standard maintenance for blade assembly.
Remove phillips screws from clipper housing. Separate housing.
Locate wires to circuit board. Remove with needle nose pliers.
Remove and replace circuit board and wires.
Replace clipper housing with phillips screws
Locate wires to circuit board. Remove with needle nose pliers.
Remove and replace circuit board and wires.
Replace clipper housing with phillips screws
Did you find this story helpful?
Thanks for voting and helping fellow customers!
Tool Type:
Hair Clipper
Parts Used:
Repair Difficulty:
Easy
Time Spent Repairing:
Less than 15 minutes
Tools Used:
Screwdriver
Switch
1 removed switch and replaced switch
2 added foam pad
2 added foam pad
Did you find this story helpful?
Thanks for voting and helping fellow customers!
Tool Type:
Hair Clipper
Parts Used:
Repair Difficulty:
Easy
Time Spent Repairing:
15-30 minutes
Tools Used:
Screwdriver
Andis AG-2 2 speed unit was dropped and damaged the case.
Both upper and lower housings were damaged in use over time. The case was broken enough to warrant replacement after being dropped on a hard tile floor. Examination revealed that the Quad blade drive was worn from use.
1. Removed upper housing (4 screws)
2. Removed motor assembly from lower housing (2 screws)
3. Removed quad drive (2 screws)
4. Installed New Quad drive assy. (2 screws)
5. Installed motor assy. into new lower Housing (2 screws)
6. Installed new upper Housing (4 screws)
Note: Pay attention to line cord grommet orientation when removing motor assy. Also, note the power switch actuator orientation and the insulator on top of the switch. If your unit has a lot of time on it then check the brush condition before ordering parts.
1. Removed upper housing (4 screws)
2. Removed motor assembly from lower housing (2 screws)
3. Removed quad drive (2 screws)
4. Installed New Quad drive assy. (2 screws)
5. Installed motor assy. into new lower Housing (2 screws)
6. Installed new upper Housing (4 screws)
Note: Pay attention to line cord grommet orientation when removing motor assy. Also, note the power switch actuator orientation and the insulator on top of the switch. If your unit has a lot of time on it then check the brush condition before ordering parts.
Did you find this story helpful?
Thanks for voting and helping fellow customers!
Tool Type:
Hair Clipper
Repair Difficulty:
Medium
Time Spent Repairing:
15-30 minutes
Tools Used:
Screwdriver
Corroded circuit board
Remove plastic body.
Take picture to insure correct placement of wires for cord.
Disconnect cord.
Remove old circuit board.
Install new circuit board.
Reconnect cord.
Remove and replace blade drive.
Place Insulation sheet in front of switch.
Place rubber protector on switch.
Plug in and test.
Put body together again.
Finished.
Take picture to insure correct placement of wires for cord.
Disconnect cord.
Remove old circuit board.
Install new circuit board.
Reconnect cord.
Remove and replace blade drive.
Place Insulation sheet in front of switch.
Place rubber protector on switch.
Plug in and test.
Put body together again.
Finished.
Did you find this story helpful?
Thanks for voting and helping fellow customers!
Tool Type:
Hair Clipper
Parts Used:
Repair Difficulty:
Easy
Time Spent Repairing:
Less than 15 minutes
Tools Used:
Screwdriver
The drive is what makes the blade move side to side. Mine broke so my clippers didn't cut hair.
Took apart. Removed the old drive. Replaced with the new drive. Reassembled and tested.
Did you find this story helpful?
Thanks for voting and helping fellow customers!
Tool Type:
Hair Clipper
Parts Used:
Repair Difficulty:
Easy
Time Spent Repairing:
Less than 15 minutes
Tools Used:
Screwdriver
Clipper blades started to chatter.
Simply followed replacement instructions which came with the part. Removed a total of four screws, removed old blade drive and inserted new drive. Replaced screws. Blades and clipper are as quiet as when new.
Did you find this story helpful?
Thanks for voting and helping fellow customers!
show more
Reviews
6 Reviews
Average Rating (out of 5):
Click to filter by ratings:
5 stars
6
4 stars
0
3 stars
0
2 stars
0
1 stars
0
< PREV
- 1
part worked perfectly
The part was perfect and came with instructions that made it simple to repair.
Guest -
June 2, 2022
Verified Purchase
Worked as Expected
Exact replacement. Never been disappointed in eReplacementparts. Delivered in a timely manner and a perfect fit. Andis clippers work like they should now.
Guest -
July 7, 2021
Verified Purchase
EVERYTHING I ORDERED WORKED AND FIT PERFECTLY
Bought PART FOR WIFES HAND CLIPERS EVERYTHING FIT AND WORKED GREAT AND SHE SAID THEY HAVENT WORKED THIS GOOD SINCE NEW FAST SHIPPER
Guest -
February 11, 2020
Verified Purchase
Easy ordering,great price and fit perfectly
The parts arrived in a timely manner and fit perfectly. Was easy to find what I needed and the price was very competitive. I will definitely be ordering from here again.
Jimmy -
December 2, 2019
Verified Purchase
Easy repair, great part
Arrived quickly.clipper part works great!!
amy -
November 28, 2019
Verified Purchase
Easy repair.
I dropped my clipper on the floor and this small internal plastic piece was broken. I was so happy it was easy to fix, saved myself $150 by not having to buy a new clipper! Thank you eReplacemntParts!
michael -
August 27, 2019
Verified Purchase
Verified Purchase
eReplacementParts Team
< PREV
- 1
Product Information