Easy
15-30 minutes
The pushnut attaches to the wheel assembly. This part is made out of metal and is available individually. It might require a hammer to replace this item if it becomes broken. This is an original Bear Cat part for use in chippers, shredders, and trimmers.
Pushnut, 5/8 In 15406
OEM part for: Crary Bear Cat
Part Number: 15406
$4.99
Usually ships in 7 - 12 business days
Leaves our warehouse within 7 - 12 business days
Jump To:
Frequently Purchased Together ?
Compatibility
This part will fit the following 13 machines
Crary Bear Cat
SC2206 Chipper/Shredder View Diagrams & Manuals
SC3206 (70050) Chipper/Shredder View Diagrams & Manuals
SC3240 (70380) Chipper/Shredder View Diagrams & Manuals
SC3270 Chipper/Shredder View Diagrams & Manuals
SC3305 (70080) Chipper/Shredder View Diagrams & Manuals
SC3305E (70085) Chipper/Shredder View Diagrams & Manuals
SC3342 (75311) Chipper / Shredder View Diagrams & Manuals
WT160S Wheeled Trimmer View Diagrams & Manuals
WT160T Wheeled Trimmer View Diagrams & Manuals
WT190 Wheeled Trimmer View Diagrams & Manuals
WT190SE Wheeled Trimmer View Diagrams & Manuals
WT190T Wheeled Trimmer View Diagrams & Manuals
SC3265 (A08787) 3 Inch Chipper/Shredder View Diagrams & Manuals
Show More Compatible Models
This item works with the following types of products:
- Chipper / Shredder Parts
- Trimmer Parts
Questions & Answers ?
Our customer Service team is at the ready daily to answer your part and product questions.
Ask our Team
We have a dedicated staff with decades of collective experience in helping customers just like you purchase parts to repair their products.
Does this fit my product?Questions & Answers for Pushnut, 5/8 In
No questions have been asked yet
Customer Repair Instructions ?
All our customer repair instructions are solicited directly from other customers just like you who have purchased and replaced this exact part.
The original wheel (plastic) broke around the center where it fit over the bearing.
Daryl - September 10, 2019
👍 1 of 1 people found this instruction helpful
Tool Type
Trimmer
Difficulty
Easy
Time
Less than 15 minutes
Tools Used
Pliers, hammer
1. Removed old pushnut by grasping with pliers and turning counter-clockwise.
2. Slid wheel, with bearings off the axle.
3. Slid new wheel, with new bearings that came with it, onto axle.
4. Positioned new pushnut and tapped into place with hammer.
Easy fix, but very expensive for replacement plastic wheel.
2. Slid wheel, with bearings off the axle.
3. Slid new wheel, with new bearings that came with it, onto axle.
4. Positioned new pushnut and tapped into place with hammer.
Easy fix, but very expensive for replacement plastic wheel.
Did you find this story helpful?
Thanks for voting and helping fellow customers!
flat tire
Thomas - April 17, 2023
Tool Type
Chipper Shredder
Difficulty
Easy
Time
15-30 minutes
Tools Used
Pliers, hammer
replaced the tire and wheel.
Did you find this story helpful?
Thanks for voting and helping fellow customers!
Broken drive belts
Paul - March 3, 2018
Tool Type
Chipper Shredder
Difficulty
Medium
Time
30-60 minutes
Tools Used
Wrench Set
Removed upper and lower belt covers.
Removed tensioner.
Installed new belts on pulleys.
Reinstalled covers.
Removed tensioner.
Installed new belts on pulleys.
Reinstalled covers.
Did you find this story helpful?
Thanks for voting and helping fellow customers!
Missing wheel.
Bobby - October 23, 2017
Tool Type
Trimmer
Difficulty
Easy
Time
15-30 minutes
Tools Used
, Hammer
Put the wheel on, started the push nut and hammered it on.
Did you find this story helpful?
Thanks for voting and helping fellow customers!
OEM stands for Original Equipment Manufacturer and means the part you’re buying is sourced directly from the manufacturer who made your product. At eReplacementParts, we sell only genuine OEM parts, guaranteeing the part you’re purchasing is of better design and of higher quality than aftermarket parts.
Our product descriptions are a combination of data sourced directly from the manufacturers who made your product as well as content researched and curated by our content & customer service teams. This content is edited and reviewed internally before being made public to customers.
Our customer service team are at the ready daily to answer your part and product questions. We have a dedicated staff with decades of collective experience in helping customers just like you purchase parts to repair their products.
All our part reviews are solicited directly from other customers who have purchased this exact part. While we moderate these reviews for profanity, offensive language or personally identifiable information, these reviews are posted exactly as submitted and no alterations are made by our team.
All our customer repair instructions are solicited directly from other customers just like you who have purchased and replaced this exact part. While we moderate these reviews for profanity, offensive language or personally identifiable information, these reviews are posted exactly as submitted and no alterations are made by our team.
Based on data from past customer purchasing behaviors, these parts are most commonly purchased together along with the part you are viewing. These parts may be necessary or helpful to replace to complete your current repair.
All our installation videos are created and produced in collaboration with our in-house repair technician, Mark Sodja, who has helped millions of eReplacementParts customers over the last 13 years repair their products. Mark has years of experience in selling and repairing both commercial and residential products with a specialty in gas-powered equipment.
This data is collected from customers who submitted a repair instruction after replacing this exact part. Customers can rate how easy the repair was to complete and how long it took. We aggregate this data to provide a repair rating that allows customers to quickly determine the difficulty and time needed to perform their own repair.
