866-322-9842
Mon-Fri 7am-1am EST
Sat-Sun 7am-11pm EST

Purge Line

Part Number: 530069216
PoulanParamountWeed EaterHusqvarna

We Sell Only Genuine Parts From the Manufacturer – Guaranteed!

Availability: 25+ in stock
Price: $4.55
Quantity:
Order within the next 1 hour
and your part ships today!

*This part replaces obsolete part #: 530021132, , 530021014, 530021026, 530021035, 530021025 and 530021028.

Specifications
  • OD 3/16
Description:
The purpose of the 530069216 Tank Purge Line is to return the excess fuel that is in the carburetor after the primer bulb has been pushed.
The excess fuel is forced through the purge line back into the fuel tank.
Over time the Tank Purge Line will become brittle and crack and will need to be replaced.
Product Information
Manufacturer: Poulan, Paramount, Weed Eater, Husqvarna
Product Number: 530069216
Classification: Part
Weight: 0.01 lbs.
Also Known As: Fuel Line
Shipping: Ships Worldwide
Repair Guides
Articles:
How to Replace the Fuel Tank Purge Line on a Poulan Chainsaw (Model P3314)
Fuel lines leaking? Learn to quickly remove and install the fuel tank purge line on your Poulan chainsaw. Step-by-step i...
November 01, 2016
Related Products
Compatibility

This part is compatible with the following machines:

Paramount
Poulan
1800 Gas Chain Saw
1800 Gas Chain Saw
1900 Gas Chain Saw
1900 Gas Chain Saw
1950 Type 1 Gas Chain Saw
1950 Type 1 Gas Chain Saw
1950 Type 2 Gas Chain Saw
1950 Type 2 Gas Chain Saw
1950 Type 3 Gas Chain Saw
1950 Type 3 Gas Chain Saw
1950 Type 4 Gas Chain Saw
1950 Type 4 Gas Chain Saw
1950 Type 5 Gas Chain Saw
1950 Type 5 Gas Chain Saw
1950 Type 6 Gas Chain Saw
1950 Type 6 Gas Chain Saw
1950 Type 7 Gas Chain Saw
1950 Type 7 Gas Chain Saw
1950LE Type 1 Gas Chain Saw
1950LE Type 1 Gas Chain Saw
1950LE Type 2 Gas Chain Saw
1950LE Type 2 Gas Chain Saw
1975 Type 1 Gas Chain Saw
1975 Type 1 Gas Chain Saw
1975 Type 2 Gas Chain Saw
1975 Type 2 Gas Chain Saw
1975 Type 3 Gas Chain Saw
1975 Type 3 Gas Chain Saw
1975 Type 4 Gas Chain Saw
1975 Type 4 Gas Chain Saw
1975 Type 5 Gas Chain Saw
1975 Type 5 Gas Chain Saw
1975 Type 6 Gas Chain Saw
1975 Type 6 Gas Chain Saw
1975 Type 7 Gas Chain Saw
1975 Type 7 Gas Chain Saw
1975LE Type 1 Gas Chain Saw
1975LE Type 1 Gas Chain Saw
1975LE Type 2 Gas Chain Saw
1975LE Type 2 Gas Chain Saw
20 Gas Chain Saw
20 Gas Chain Saw
2000 Gas Chain Saw
2000 Gas Chain Saw
2025 Gas Chain Saw
2025 Gas Chain Saw
2050 Type 1 Gas Chain Saw
2050 Type 1 Gas Chain Saw
2050 Type 2 Gas Chain Saw
2050 Type 2 Gas Chain Saw
2050 Type 3 Gas Chain Saw
2050 Type 3 Gas Chain Saw
2050 Type 4 Gas Chain Saw
2050 Type 4 Gas Chain Saw
2050 Type 5 Gas Chain Saw
2050 Type 5 Gas Chain Saw
2050 Type 6 Gas Chain Saw
2050 Type 6 Gas Chain Saw
2050 Type 7 Gas Chain Saw
2050 Type 7 Gas Chain Saw
2055 Type 1 Gas Chain Saw
2055 Type 1 Gas Chain Saw
2055 Type 2 Gas Chain Saw
2055 Type 2 Gas Chain Saw
2055 Type 3 Gas Chain Saw
2055 Type 3 Gas Chain Saw
2055 Type 4 Gas Chain Saw
2055 Type 4 Gas Chain Saw
2055 Type 5 Gas Chain Saw
2055 Type 5 Gas Chain Saw
2055 Type 6 Gas Chain Saw
2055 Type 6 Gas Chain Saw
2055 Type 7 Gas Chain Saw
2055 Type 7 Gas Chain Saw
2050LE Type 1 Gas Chain Saw
2050LE Type 1 Gas Chain Saw
2050LE Type 2 Gas Chain Saw
2050LE Type 2 Gas Chain Saw
2050WT Type 1 Gas Chain Saw
2050WT Type 1 Gas Chain Saw
2050WT Type 2 Gas Chain Saw
2050WT Type 2 Gas Chain Saw
2050WT Type 3 Gas Chain Saw
2050WT Type 3 Gas Chain Saw
2050WT Type 4 Gas Chain Saw
2050WT Type 4 Gas Chain Saw
2050WT Type 5 Gas Chain Saw
2050WT Type 5 Gas Chain Saw
2050WT Type 6 Gas Chain Saw
2050WT Type 6 Gas Chain Saw
2050WT Type 7 Gas Chain Saw
2050WT Type 7 Gas Chain Saw
2055LE Type 1 Gas Chain Saw
2055LE Type 1 Gas Chain Saw
2055LE Type 2 Gas Chain Saw
2055LE Type 2 Gas Chain Saw
2075 Type 1 Gas Chain Saw
2075 Type 1 Gas Chain Saw
2075 Type 2 Gas Chain Saw
2075 Type 2 Gas Chain Saw
2075 Type 3 Gas Chain Saw
2075 Type 3 Gas Chain Saw
2075 Type 4 Gas Chain Saw
2075 Type 4 Gas Chain Saw
2075 Type 5 Gas Chain Saw
2075 Type 5 Gas Chain Saw
2075 LE Gas Chain Saw
2075 LE Gas Chain Saw
2075C Type 1 Gas Chain Saw
2075C Type 1 Gas Chain Saw
2075C Type 2 Gas Chain Saw
2075C Type 2 Gas Chain Saw
2075C Type 3 Gas Chain Saw
2075C Type 3 Gas Chain Saw
2075C Type 4 Gas Chain Saw
2075C Type 4 Gas Chain Saw
2075C Type 5 Gas Chain Saw
2075C Type 5 Gas Chain Saw
2075OC Type 1 Gas Chain Saw
2075OC Type 1 Gas Chain Saw
2075OC Type 2 Gas Chain Saw
2075OC Type 2 Gas Chain Saw
2075OC Type 3 Gas Chain Saw
2075OC Type 3 Gas Chain Saw
2075OC Type 4 Gas Chain Saw
2075OC Type 4 Gas Chain Saw
2075OC Type 5 Gas Chain Saw
2075OC Type 5 Gas Chain Saw
20D Gas Chain Saw
20D Gas Chain Saw
2100 Gas Chain Saw
2100 Gas Chain Saw
2150 Type 1 Gas Chain Saw
2150 Type 1 Gas Chain Saw
2150 Type 2 Gas Chain Saw
2150 Type 2 Gas Chain Saw
2150 Type 3 Gas Chain Saw
2150 Type 3 Gas Chain Saw
2150 Type 4 Gas Chain Saw
2150 Type 4 Gas Chain Saw
2150 Type 5 Gas Chain Saw
2150 Type 5 Gas Chain Saw
2150 Type 6 Gas Chain Saw
2150 Type 6 Gas Chain Saw
2150 Type 7 Gas Chain Saw
2150 Type 7 Gas Chain Saw
2150 Predator Type 1 Gas Chain Saw
2150 Predator Type 1 Gas Chain Saw

Products Compatibility

This item works with the following types of products:

  • • Chain Saw
  • • Hedge Trimmer
  • • Saw
  • • Trimmer
Questions & Answers

I can't even get a spark with my chainsaw
gary for model number P3314
Hi Gary, thank you for your question. It looks like when you have that issue, the problem is either with your spark plug itself or the ignition module. I hope that helps. Good luck with your repair.
I have a broken fuel line on my saw. I am searching on "fuel line" but "purge line" keeps coming up. Do you sell a fuel line for my saw? I don't believe they are the same thing... Thx, Steve
steve germaine for model number poulan countervibe 3700 vintage ~1983
Hello Steve, thank you for your inquiry! We found that the fuel line for your poulan countervibe 3700 is part number 530069247. I hope this information helps!
Repair Instructions: Submitted by Customers Like You
62 of 75 people found this instruction helpful
Tool Type:
Chain Saw
Parts Used:
Fuel Line - 530069247
Purge Line - 530069216
Purge Bulb - 530047721
Fuel Cap Assembly - 580940901
Repair Difficulty:
Easy
Time Spent Repairing:
15-30 minutes
Tools Used:
Screwdriver, Pliers
Old Primer Bulb was cracked and would not pump fuel into the carb
- Removed top cover (to access carb area and allow side panel removal)

- Removed side cover where primer bulb is located

- Remove old snap in primer bulb (without disconnecting fuel lines)

- Cut and replace the 2 fuel lines one at a time (mine were hard and brittle from old fuel)

- The new bulb has 2 fuel ports, one is longer than the other which matched the old bulb.

- Installation instructions said to double check the direction of the fuel flow (the bulb sucks fuel through the carb, so the inlet side is connected to the carb and the outlet side goes back to the fuel tank).

- Snap the new bulb into place on the side panel

- Attach the side panel

- Attach the top panel

Did you find this story helpful?
Thanks for voting and helping fellow customers!
34 of 36 people found this instruction helpful
Tool Type:
Trimmer
Parts Used:
Fuel Line - 530069247
Fuel Cap With Retainer - 530014347
Purge Line - 530069216
Carburetor Assembly - 530071822
Repair Difficulty:
Easy
Time Spent Repairing:
15-30 minutes
Tools Used:
Pliers, Allen Key Set, Needle Nose Pliers, Star Screwdriver Set
SST25 Line Trimmer: Would not start. Prior owner left old fuel in the entire fuel system for several years. Entire fuel system was gummed and would not start.
This process looks long but I assure you it is super easy and takes no time at all. If this is your first time taking a fuel system apart take pictures or use a IPB so you do not have to rely on memory for reassembly.

1. First I drained and disposed of all the old fuel.

2. Then I removed the fuel filter from the intake hose in the fuel tank with needle nose pliers. Once the fuel filter was removed then I remove the return line fuel assembly pickup (fancy name for little plastic insert) with needle nose pliers.

3. After both the fuel filter and fuel assembly pickup was remove then I removed the gas tank carefully, thus not to tear the fuel lines. The fuel tank is held on with two star screws so you would need the proper star screw driver or ratchet attachment.

4. Next I removed the hoses from the carburetor also careful not to tear the fuel lines. The reason for such care is because I used the old hoses to determine the size of the new hoses. Now for the carburetor.

5. I removed the air filter and air filter cover there are two Allen screws that hold on the carburetor. Using a the proper Allen key I remove both screws. Be careful not to tear any gaskets when removing. Also the throttle cable to attached to the carburetor it is easy to remove just angle the L properly and it slides right out.

Now that the carburetor is removed assess the situation. In my case I took the carburetor apart to see if I could clean it before I ordered a new carburetor but this was beyond cleaning. If you have never taken a carburetor apart proceed with caution and read a different repair guide.

Most of the parts where rusted and gummed and for 25 bucks I simple decided to order a new one. Also since I had the fuel take off I cleaned it and ordered new hoses, fuel filter, and a new fuel tank cap. I only ordered a new cap because the other one was cracked.

6. Once the parts arrived I began by cutting the new fuel hoses. I used the old hoses to determine the size. NOTE: Cut the new pieces a little longer than the old ones because the hardest part of the project is putting the new hoses into the fuel tank. And unless you are really good you will tare up the ends a bit and will need to be cut off. Plus you will need to cut the new ones at an angle so you will need to cut that flat as well.

7. After the cut is made, cut the end of the hoses at a sharp angle thus to be able to put the tip of the hose through the holes int he fuel tank. I recommend using a little lube on the outside of the hoses as well just so they slide easier. In my case I used a little 2-cycle oil because I knew it would not contaminate the line or the gas in the fuel tank. Once the hoses where just barely through the hole I grabbed the end of the hoses with needle nose pliers and pulled the desired length. On the intake hose I cut the end flush and attached the new fuel filter then put it back into the fuel tank. Also cut and attached the return line fuel assembly pickup to the return line then pulled it up to the top of the fuel tank.

8. Before I attached the tank I put the new carburetor on the same way I took it off making sure to attach the throttle cable as I went. When the screws where in line I tightened them down snug. Do not over tighten.

9. Now I attached fuel tank in same manner not to over tighten the screws.

10. Finally I attached the fuel lines to the carburetor filled the fuel tank with good 2 cycle and closes the fuel tank with my new fuel cap. Attached the air filter and air filter cover and we where good to go.

Primed the carburetor, put it full choke, cranked a could of times went into half choke. It fired right up, went to no choke and gave it full throttle and she purred like a kitten. Okay it is a line trimmer she roared like a lion but either way it is working great.
Did you find this story helpful?
Thanks for voting and helping fellow customers!
29 of 34 people found this instruction helpful
Tool Type:
Trimmer
Parts Used:
Fuel Line - 530069247
Purge Line - 530069216
Repair Difficulty:
Easy
Time Spent Repairing:
Less than 15 minutes
Tools Used:
Screwdriver, Pliers
fuel lines inside gas tank corroded
Two lines going into tank.
Take pictures before you start on which lines go where.
Unscrewed tank and was putting back on in 15 minutes.
Hardest part was getting new line back into tank.
Easy thing was line was already pre cut at angle.
Did you find this story helpful?
Thanks for voting and helping fellow customers!
6 of 6 people found this instruction helpful
Tool Type:
Trimmer
Parts Used:
Fuel Cap With Retainer - 530014347
Purge Line - 530069216
Foam Air Filter - 530037793
Spark Plug - 952030249
Kit - Repair - K20-WAT
Repair Difficulty:
Easy
Time Spent Repairing:
15-30 minutes
Tools Used:
Screwdriver, Pliers, Allen wrenches
Unit started extremely hard and would not run full-throttle.
Remove the carburetor and replaced all gaskets, fuel pump diaphragm and regulator diaphragm. Reseated bulb and replaced the gaskets which mate the carburetor to the engine's intake manifold. Once completed, I tightened all the bolts on the crankcase and engine head, replaced and gapped the spark plug. The unit started on the second pull and is running great.

A quick note about the Walbro rebuild kit and the original parts in the carburetor. The fuel pump, for these carbs, in the original was a piece of blue plastic/mylar(?) that was solid. The replacement fuel pump looked like a mesh screen. That had me confused, for a bit. I did not realize that the replacement parts would look so different from the originals. That said, I should laugh at myself because this unit was made in 1996 and this is the first time it's been rebuilt. Things have changed, a bit, since them, obviously. LOL.

This was a quick, and easy job. If you can use a screwdriver you can do this work.
Did you find this story helpful?
Thanks for voting and helping fellow customers!
4 of 4 people found this instruction helpful
Tool Type:
Pruner
Parts Used:
Fuel Line - 530069247
Purge Line - 530069216
Purge Bulb - 530047721
Fuel Filter - 530095646
Repair Difficulty:
Medium
Time Spent Repairing:
1-2 hours
Tools Used:
Screwdriver, Sharp knife, Allen wrench
Two Poulan Pro power heads not running
The fuel system disintegrates from the ethanol in gasoline, so I ordered the necessary parts; fuel filter and fuel line, purge line (different size), and a primer bulb, if one is needed.. If the primer bulb is tore, cracked, or makes a whistling sound, replace it first. Get a diagram online if your fuel lines are in pieces, but if they are intact, remove the fuel line from the back of the primer assembly, slowly pull the fuel filter and fuel line out through the fuel fill port. Cut your new fuel line's end at a diagonal, so that you can insert it through the hole in the gas tank. Slowly push enough through until you can grab it from the fuel fill port. Cut off this diagonal piece so that the end is once again square, and install your new fuel filter. Pull the fuel line back enough so the fuel filter is at an appropriate pickup point, I.e., close to the bottom of the tank while running. Cut the fuel line so that it just connects with the primer assembly. Remove the purge line from the primer assembly and use it to cut a new purge line slightly longer, with a diagonal cut on one end. Feed the diagonal end through the tank wall, and connect the other end to the primer assembly. I was able to do my 2 machines from one fuel line and purge line kit.
Did you find this story helpful?
Thanks for voting and helping fellow customers!
3 of 3 people found this instruction helpful
Tool Type:
Blower
Parts Used:
Fuel Line - 530069247
Purge Line - 530069216
Spark Plug - 952030249
Fuel Filter - 530095646
Repair Difficulty:
Medium
Time Spent Repairing:
1-2 hours
Tools Used:
Wrench Set
Fuel lines deteriorated
1 Remove fuel tank and carburetor
2 Insert lines into tank and attach filter
3 Reattach tank

4 Insert lines onto carburetor
5 Reattach carburetor.( not an easy task)
The smaller intake line has an undersized I.D. which required heated stretching in order to slip over the carburetor inlet pipe.
Did you find this story helpful?
Thanks for voting and helping fellow customers!
3 of 3 people found this instruction helpful
Tool Type:
Chain Saw
Parts Used:
Fuel Line - 530069247
Purge Line - 530069216
Oil Cap Assembly - 530057236
Fuel Filter - 530095646
Repair Difficulty:
Medium
Time Spent Repairing:
30-60 minutes
Tools Used:
Screwdriver, Pliers, Wrench Set, Nutdriver, Adjustable Wrench
Fuel line and purge line deteriorated also bar chain oil leaking
Hardest part getting the fuel line and the purge line through the tiny hole, in gas tank? I used a piece of wire I attached to the end of the fuel line and fed it through.
Did you find this story helpful?
Thanks for voting and helping fellow customers!
1 of 1 people found this instruction helpful
Tool Type:
Trimmer
Parts Used:
Fuel Line - 530069247
Purge Line - 530069216
Purge Bulb - 530058709
Fuel Filter - 530095646
Repair Difficulty:
Medium
Time Spent Repairing:
30-60 minutes
Tools Used:
Screwdriver, Pliers
Fuel line rupture
Removed defective parts, replaced with new parts. simple
Did you find this story helpful?
Thanks for voting and helping fellow customers!
1 of 1 people found this instruction helpful
Tool Type:
Trimmer
Parts Used:
Fuel Line - 530069247
Purge Line - 530069216
Air Filter Foam - 530036575
Carburetor Assembly - 530071811
Repair Difficulty:
Easy
Time Spent Repairing:
15-30 minutes
Tools Used:
, Allen wrench
Carb needed to be replaced and the fuel lines also needed replaced
Poulan weed eater would not run carb was shot ordered the correct unit and fuel lines, removed old carb. That was about ten minutes, cleaned and wiped off intake installed new carb and replaced the fuel lines fifteen minutes, gased it up, pumped it up and it started and it ran great no adjustments​ was needed.
Did you find this story helpful?
Thanks for voting and helping fellow customers!
2 of 3 people found this instruction helpful
Tool Type:
Pruner
Parts Used:
Fuel Line - 530069247
Purge Line - 530069216
Purge Bulb - 530047721
Repair Difficulty:
Medium
Time Spent Repairing:
15-30 minutes
Tools Used:
Screwdriver, Pliers
Fuel lines and bulb-purge were rotten.
Removed the old rotten parts and replaced with the new ones.
Did you find this story helpful?
Thanks for voting and helping fellow customers!
Discussion
Discussion for Purge Line - ( 530069216 )
Discussion is closed. To ask our experts a question about a part, use the Q&A feature.
Question: Fuel Line And Purge Line

1532098

My PP3516AVX appears to have two different sizes fuel and purge lines. Does the 530069247 replace both?
WJA
Hello 1532098,

The Poulan part number 530069216 Purge Line is larger in diameter than the part number 530069247 Fuel line. They would both need to be ordered individually.

-WJA
Question: Weedeater Xt700

1524829

what is size of fuel purge line?
Hard to say, but usually the purge line is LARGER than the fuel pickup line on Weedeater brand weedeater. According to ebay sellers, it is 3/32" ID X 3/16" OD. The main fuel line is quite smaller.

link removed

link removed
Question: Poulan Chainsaw Fuel Lines

ddewitt

Poulan chainsaw, PP4218avl. 2 lines are in tank. 1 large, 1 small. is Purge line and has a fitting designed to connect two lines. What other fuel line is connected to this fitting?
I wrote wrong info for YOUR saw earlier. It doesnt have a vent line like I thought it may. It has an external primer bulb. So, yes there are 3 fuel lines. One line goes from fuel filter supply in the fuel tank to fuel inlet nipple on the carburetor. One line goes from outlet nipple on carburetor to intake nipple on external primer bulb. The Third line goes from the Output nipple on the external bulb BACK into the fuel tank. It is easy to get these lines crossed. With the lines OFF the external bulb, push it to tell the intake port from the OUTPUT port on it.
The external bulb PULLS fresh fuel into the carb from the fuel tank. and PUSHES air and old fuel pulled out of the carb BACK to the fuel tank.
So, anytime you see fuel inside the external bulb on the saw, that fuel is headed BACK into the fuel tank.
Question: Fuel Line

janjerryj

What are the dimensions/specs of the fuel line?
Question: Gas Line

seelow

looking for gas line for poulan p1500 weedeater
Hello seelow That is a real common sized line. Take a piece of the old line with you to Lowes or Home Depot. They sell fuel line there in kits and universal sizes in the small engine department. There is plenty of it on ebay as well.
Question: Replacing The3 Tank Purge Lines ...

1388962

is there a video to show how I can get to the tank. Do I needs to remove the housing?
Hi 1388962 Yes, you are going to need to remove the housings AND the fuel tank. It takes a little patience. Here are some tips.

http://www.ereplacementparts.com/article/6125/How_to_Replace_Fuel_Lines_on_2Cycle_Engines.html
Question: Fuel Tank

1266016

There are two 3/16" hole in the gas tank, one for the fuel line. Does the second hole stay empty (open)? Does anything go in this hole?
WJA
Hello 1266016,

We have an article and video on How to Replace Fuel Lines on 2-Cycle Engines. I hope this will help answer your question. If not, post the model number of your machine and we will be able to answer your question.

-WJA
Question: Fuel Line To Tand,how Ti Install...

sawpro

how do you run fuel line into tank I can't install line in hole
WJA
Hello sawpro,

We prepared an article and video that I hope will assist you with the job you are trying to accomplish. Here is the link to it.

Hoe to Replace Fuel Lines

Good luck, WJA,
Question: Fuel Line

1111225

I have a poulon 446t pole trimmer and the fuel pick up assembly inside the gas tank broke off from the fuel line. Is this the correct line for the 446t to reconnect to the assembly?
WJA
Hello 1111225,

The part number 530069216 is the correct line for the 446T.

-WJA
WJA thanks a bunch much appreciated.

Jason
Question: Poulon Pro Ppb250E Fuel Lines

bainia

Does anyone have a diagram for hookup of fuel lines from tank to purge bulb to carb?
WJA
Hello bainia,

Here is an article and video on How to Replace Fuel Lines on a 2 Cycle Engine.

Hope this helps,
-WJA
Question: Fuel Lines

Wendy

Where do the fuel lines go that come off of the bulb?
[FONT="Courier New][/FONT] I don't know & don't speak chinenese. Better off buying a Sthil brand.
WJA
Hello Wendy,

Here is an article and video on How to Replace Fuel Lines on a 2 Cycle Engine.

Hope this helps,
-WJA
Question: Pressure In Gas Tank

itsmerog

when I take the gas cap off there is pressure in the tank and the top short tube is only about 2-3 inches long?
Question: Gas Cap

robamoss

what causes fuel to spray from gas cap on my weed eater
UtahAV
Hi robamoss,

The gas cap has a breather in it to allow air into the tank as fuel flows out. I would guess that the breather has failed. Replacing the cap should fix things. It is part #530014347.

I hope this helps,

-UtahAV
-Mark
visa mastercard discover american express PayPal
HACKER SAFE certified sites prevent over 99.9% of hacker crime.

fancyboxy