eReplacementParts.com
877-346-4814
Shindaiwa Parts

Primer-pump 12438012710

OEM part for: Shindaiwa, Echo

Part Number: 12438012710


Install
Videos!
Grid squares measure 1x1 inch
In Stock
Ships within 1 business day
Easy 15-30 minutes (2 rated repairs)?
OEM: Original Equipment Manufacturer ?
ShindaiwaEcho
Does this d-block d-md-none fit my product?

Product Description ?

This is an authentic OEM supplied replacement primer bulb. It is a specially designed for use on Shindaiwa gas powered trimmers/brushcutters. Its purpose is to create vacuum in the carburetor. When you press down on the bulb, gas from the tank will move into the the carburetor bowl. Excess fuel is then returned back to the fuel tank. It also removes air from the carburetor, which helps the engine start more quickly and easily. It is made from a rubber material and it is sold individually.

Over time, the primer bulb may begin to deteriorate or crack. Fortunately, replacing the primer bulb is an easy task. You would need a wrench to complete this job.

• Remove the air filter lid
• Drain the fuel
• Remove the air cleaner case
• Remove the carburetor
• Remove the primer bulb
• Install the primer bulb
• Reassemble in reverse order and test the unit

  • Classification: Part
  • Weight: 0.01 lbs.
  • Shipping: Ships Worldwide

Frequently Purchased Together ?

Compatibility

This part will fit the following 29 machines

Shindaiwa

PB270 Power Broom View Diagrams & Manuals
B450 Brushcutter View Diagrams & Manuals
B530 Trimmer/Brushcutter View Diagrams & Manuals
C350 Brushcutter View Diagrams & Manuals
C270 Brushcutter View Diagrams & Manuals
B450 (T83626001001-T83626999999) Brushcutters (B) View Diagrams & Manuals
B450AUS (20003851-20004630) Brushcutters (B) B450 View Diagrams & Manuals
B450AUS (9023591-9093850) Brushcutters (B) B450 View Diagrams & Manuals
B450EMC (20008885-20012244) Brushcutters (B) B450 View Diagrams & Manuals
B450EMC (9016415-9098884) Brushcutters (B) B450 View Diagrams & Manuals
B450F (U16026001001-U16026999999) Brushcutters (B) View Diagrams & Manuals
B450R (T24225001001-T24225999999) Brushcutters (B) View Diagrams & Manuals
B530 (20009784-20011623) Brushcutters (B) View Diagrams & Manuals
B530 (9018344-9099783) Brushcutters (B) View Diagrams & Manuals
C270EMC Brushcutters (C) View Diagrams & Manuals
C350 (20001921 - 20003190) Brushcutters (C) View Diagrams & Manuals
C350 (9010921-9011920) Brushcutters (C) View Diagrams & Manuals
B452 (U42429001001-U42429999999) Brushcutter View Diagrams & Manuals
B452R (U42529001001-U42529999999) Brushcutter View Diagrams & Manuals

Echo

PHP-800 Power Sprayer View Diagrams & Manuals
SHP-800 (H05000001001-H05000999999) Sprayer View Diagrams & Manuals
SHP-800-2 (500005065-500999999) Sprayer View Diagrams & Manuals
SHP-800RS (001300000001-001300999999) Sprayer View Diagrams & Manuals
SHP-800EUSTD (000600000001-000600999999) Sprayers Power Sprayer (Shp) View Diagrams & Manuals
SHP-800EUSTD (B000001-B999999) Sprayers Power Sprayer (Shp) View Diagrams & Manuals
SHP-800-2 (000500000001-000500999999) Sprayer Lawn Equipment View Diagrams & Manuals
SHP-800-2 (B000001-B999999) Sprayer Lawn Equipment View Diagrams & Manuals
Show More Compatible Models
Don't see yours? Try searching our site for :

This item works with the following types of products:

  • Trimmer Parts

This part replaces obsolete part #: 20087-81820

Repair Videos ?

Articles:
Replacing primer bulbs in small engines is one of the most common types of tool repairs, and this article explains profe...
June 25, 2010
Filthy Filters? This article will show you how to install a filter kit on an Echo SRM-225 trimmer....
May 27, 2015

Customer Part Reviews ?

5
Average Rating (out of 5):
2 Reviews
Click to filter by ratings:
5 stars
2
4 stars
0
3 stars
0
2 stars
0
1 stars
0
  • Highest Rating
  • Most Recent
< PREV
  • 1
NEXT >
  • Great customer service. Right part
    Customer service answered my question online so I could get the right part. It got here fast and fit my old weed eater perfectly.
    Guest - May 17, 2023 Verified Purchase
    Shindiawa
    Service was great and parts arrived quick
    Guest - February 10, 2021 Verified Purchase
    t
    t
    t - t days ago Verified Purchase
    eReplacementParts Team
    t

    Questions & Answers ?

    Our customer Service team is at the ready daily to answer your part and product questions.

    photo of team member
    Ask our Team

    We have a dedicated staff with decades of collective experience in helping customers just like you purchase parts to repair their products.

    Does this fit my product?

    Questions & Answers for Primer-pump


    No questions have been asked yet

    Customer Repair Instructions ?

    All our customer repair instructions are solicited directly from other customers just like you who have purchased and replaced this exact part.

    Easy 15-30 minutes (2 rated repairs)?

    Replacement of worn out OEM parts

    Dennis - April 28, 2016
    👍 1 of 1 people found this instruction helpful
    Just make sure that all of your new parts are laid out separately, in order to allow you to keep everything separate from the old parts that you will be removing. Take your time, clean areas and parts that you will be keeping as you go. Once all parts have been removed and parts cleaned, work your way backwards from the way you removed parts when installing the new parts. I use 90 degree type Allen Head wrenches without handles that way I do not over tighten fasteners. I had gasket material that stuck on me around the intake portal to the piston that needed to be scrapped off, so I brought the piston to TDC and stuffed a small bit of rag in the hole to keep debris from getting inside the head.
    I also bought from a local store a replacement muffler and muffler bolts and gasket that was installed during this time as well, but the store did not have the other parts I was needing.
    EVERY part that I ordered from eReplacement Parts fit exactly as the old parts, I did not have to make any adjustments to the new parts to get them to fit.
    When I was finished, I primed the carburetor, adjusted the choke and slid the on/off button to on, and pulled the cord one time and it fired right up. I adjusted the choke and set it down and let it idle as I put my tools up and cleaned up the area I was working in.
    I am very happy with my whole experience dealing with eReplacement Parts. I will be ordering again from them.
    Did you find this story helpful?
    Thanks for voting and helping fellow customers!

    Primer pump cracked and no start condition

    stephen - March 13, 2017
    Tool Type

    Trimmer

    Difficulty

    Easy

    Time

    Less than 15 minutes

    Tools Used

    Screwdriver, Pliers, Wrench Set, allen wrench\\\'s

    What I did was spray down the area on the trimmer where the primer goes with degreaser let it sit for a few minutes and sprayed it off. Dried the area with air, then removed the tabs that holds the fuel tank, removed a fuel line that goes to the primer pump. Removed the 4 screws that holds the bulb, and put in the new primer bulb. Attached the fuel line and fuel tank. Make sure you clean the area clean before disassembly is the main thing so when you open it up dirt and rubbish don't get in there and clog up the carb. Replacement bulb worked awesome and fired right up. Stephan T. from the 808 state :}
    Did you find this story helpful?
    Thanks for voting and helping fellow customers!

    OEM stands for Original Equipment Manufacturer and means the part you’re buying is sourced directly from the manufacturer who made your product. At eReplacementParts, we sell only genuine OEM parts, guaranteeing the part you’re purchasing is of better design and of higher quality than aftermarket parts.

    Our product descriptions are a combination of data sourced directly from the manufacturers who made your product as well as content researched and curated by our content & customer service teams. This content is edited and reviewed internally before being made public to customers.

    Our customer service team are at the ready daily to answer your part and product questions. We have a dedicated staff with decades of collective experience in helping customers just like you purchase parts to repair their products.

    All our part reviews are solicited directly from other customers who have purchased this exact part. While we moderate these reviews for profanity, offensive language or personally identifiable information, these reviews are posted exactly as submitted and no alterations are made by our team.

    All our customer repair instructions are solicited directly from other customers just like you who have purchased and replaced this exact part. While we moderate these reviews for profanity, offensive language or personally identifiable information, these reviews are posted exactly as submitted and no alterations are made by our team.

    Based on data from past customer purchasing behaviors, these parts are most commonly purchased together along with the part you are viewing. These parts may be necessary or helpful to replace to complete your current repair.

    All our installation videos are created and produced in collaboration with our in-house repair technician, Mark Sodja, who has helped millions of eReplacementParts customers over the last 13 years repair their products. Mark has years of experience in selling and repairing both commercial and residential products with a specialty in gas-powered equipment.

    This data is collected from customers who submitted a repair instruction after replacing this exact part. Customers can rate how easy the repair was to complete and how long it took. We aggregate this data to provide a repair rating that allows customers to quickly determine the difficulty and time needed to perform their own repair.

    eReplacementParts.com
    7174 South 400 West
    Suite 5
    Midvale, UT 84047
    visa mastercard discover american express PayPal