Pressure Washer Pump - 308653093:Homelite

Grid squares measure 1x1 inch

Watch The
Repair Video

Pressure Washer Pump 308653093

Part Number: 308653093

24 Reviews

Leaves our warehouse within
7 - 12 business days

Questions & Answers

Repair Instructions

*This part replaces obsolete part #: AUN31099 (2-21-18 (Rev:01)), 308653078, 308653005, 308653052, 308653003, 308653045, 308653025 and 308653006.

Product Information

Description:

This is an OEM part sourced directly from the manufacturer. Part is sold individually. Does not include the thermal relief valve (678169004) Commonly used in pressure washers, this pump creates a high volume pressure, supplying water through the high pressure hose, to the gun, and out through the pressure wand. This specific pump is only sold as a complete assembly.

Warning: California's Proposition 65

Frequently Purchased With

Thermal Relief..
$7.26

Compatibility

This part is compatible with the following machines:

Homelite

Ryobi

RY80930 Pressure Washer
RY802800 RY802800 Pressure Washer Mfg. No. 090079267
RY802700 Pressure Washer
RY802723 (090079287) Pressure Washer

RY803000 (090079359) Pressure Washer
RY803001 (090079398) Pressure Washer
RY802900 (090079399) Pressure Washer
RY80931 (090079400) Pressure Washer

Husky

HU80709 Pressure Washer
HU80911 Pressure Washer
HU80709A Pressure Washer
HU80911A Pressure Washer
HU80714 Pressure Washer
HU80915 Pressure Washer

HU80715 Pressure Washer
HU80722 Pressure Washer
HU80722A Pressure Washer
HU80833 3-N-1 Hi-Speed Gasoline Pressure Washer
HU80833A 3-N-1 Hi-Speed Gasoline Pressure Washer
HUCA80709A Pressure Washer

Expand the 61 compatible machines

Products Compatibility

This item works with the following types of products:

• Pressure Washer

Questions & Answers for Pressure Washer Pump

Sort by

My problem comes with engine running and you release the control (stop power washing) the connected hose will burst where it is fastened to the power washer.

Ted John Spitaleri for model number RY802800 asked on 2023-11-28

Hi Ted, Thank you for your question. It is important that when you are using the pressure washer, that the water temperature is set correctly and that you are using the correct hose for the what you are doing, otherwise it will burst from the pressure washer. If you did not drain the system before using it, the hose may burst from the pressure washer. Also, if the hose is bursting from the pressure washer, it may not have been properly fastened or it maybe old or worn. We hope this helps!

After a couple of years of very low usage I noticed a bolt under the pump on the ground. I turned the unit over and it was one of the three bolts holding the lower part of the pump. Tried to reinstall it before noticing it had sheared off and the break is in the middle section and inaccessible. Tried drilling and using an easyout but that broke. Seems the bolt was overtightened during manufacture since I never touched anything on the pump. Any sort of extended warranty on an issue such as this? Regards, Lee

Lee for model number PS803125 asked on 2022-11-08

Hello lee, Thank you for writing eReplacementparts.com. For warranty issues please contact Homelite. We hope this helps!

How much 80/90 oil dose it take in pump

Steven asked on 2022-04-14

Hello Steven, Thank you for the question. Fill to the bottom of the fill hole. I hope this helps and have a great day.

Repair Instructions: Submitted by Customers Like You

24 of 27 people found this instruction helpful

Tool Type:

Pressure Washer

Parts Used:

Thermal Relief Valve - 678169004

Pressure Washer Pump - 308653093

Repair Difficulty:

Easy

Time Spent Repairing:

15-30 minutes

Tools Used:

Screwdriver, Pliers, Wrench Set

No water pressure

Follow the your video, very simple, very easy. Local Homelite repair shop
Said repair would cost $250 and take a week to do. My cost less than
$100 and 20 minutes I was back on the job. Many thanks. Kind regards
Joe K.

Did you find this story helpful?

Thanks for voting and helping fellow customers!

18 of 19 people found this instruction helpful

Tool Type:

Pressure Washer

Parts Used:

Pressure Washer Pump - 308653093

Repair Difficulty:

Easy

Time Spent Repairing:

15-30 minutes

Tools Used:

Socket set, Nutdriver, Adjustable Wrench

Pump in pressure washer stopped pumping pressure.

Unbolted pump from pressure washer and attached new pump. Then pulled pressure relief valve from old pump and attached to new pump. Took 15 minutes.

Did you find this story helpful?

Thanks for voting and helping fellow customers!

15 of 16 people found this instruction helpful

Tool Type:

Pressure Washer

Parts Used:

Thermal Relief Valve - 678169004

Pressure Washer Pump - 308653093

Repair Difficulty:

Easy

Time Spent Repairing:

15-30 minutes

Tools Used:

Socket set, Wrench Set

Replace pressure pump and thermal relief valve

Keep power head upright! Remember you should drain the fuel and oil at minimum drain the fuel. Remove the 4 bolts from the pump and drop the pump assy. There is a shaft key make sure you have it on the engine shaft. Align the shaft key to the pump install the four bolts to the bottle of the engine. I fill the pump with a protectant agent them added fuel and pulled the engine start cord until the protectant came out (Note the engine was in the off position). Connected the water supply and started the engine, the unit worked like new! (Note it is important to use a pump protectant after each use and certainly before prolonged storage!)

Did you find this story helpful?

Thanks for voting and helping fellow customers!

10 of 12 people found this instruction helpful

Tool Type:

Pressure Washer

Parts Used:

Pressure Washer Pump - 308653093

Repair Difficulty:

Easy

Time Spent Repairing:

Less than 15 minutes

Tools Used:

Screwdriver, Pliers, Socket set, None

Pump was cracked on my Power Sprayer

3 bolts. Remove pump. Lube the shaft. Put on new pump. Put back in 3 bolts. I had to take the thermal relief valve from the old pump and put it on the new pump. Truly easy.

Did you find this story helpful?

Thanks for voting and helping fellow customers!

5 of 5 people found this instruction helpful

Tool Type:

Pressure Washer

Parts Used:

Pressure Washer Pump - 308653093

Repair Difficulty:

Medium

Time Spent Repairing:

30-60 minutes

Tools Used:

Pliers, Socket set, Wrench Set

Pump quit pumping had to replace pump

I had to remove 3 bolts that held the pump to the motor. The pump dropped down and it had a shaft with a key way in the middle. Then, I had to line up the new pump with the motor and secure it at the same time. This was the hardest part of the repair.

Did you find this story helpful?

Thanks for voting and helping fellow customers!

3 of 3 people found this instruction helpful

Tool Type:

Pressure Washer

Parts Used:

Pressure Washer Pump - 308653093

Repair Difficulty:

Easy

Time Spent Repairing:

Less than 15 minutes

Tools Used:

Socket set, Wrench Set

Old pump failure

Unbolt old pump three bolts detach soap feeder tube replace with new pump. Easy.

Did you find this story helpful?

Thanks for voting and helping fellow customers!

2 of 2 people found this instruction helpful

Tool Type:

Pressure Washer

Parts Used:

Pressure Washer Pump - 308653093

Repair Difficulty:

Medium

Time Spent Repairing:

15-30 minutes

Tools Used:

Socket set, Wrench Set

Easy replacement

Very easy and rather quick repair. Just disconnected everything from the old pump, removed the three bolts that secure it and took it off. Attached the new pump with the same hardware, re-connected the hose.

Did you find this story helpful?

Thanks for voting and helping fellow customers!

2 of 2 people found this instruction helpful

Tool Type:

Pressure Washer

Parts Used:

Pressure Washer Pump - 308653093

Repair Difficulty:

Medium

Time Spent Repairing:

30-60 minutes

Tools Used:

Wrench Set

Replaced pump. Winterized but still froze and cracked the housing.

Important to know that when you remove the pump you will need help holding the pump up during the replacement. I found the job to be easy if you placed the pressure washer on a table rather than at ground level. Remove three bolts then remove the old pump. Line the new pump up to the shaft and tighten the three bolts. Remove the thermal relief valve from the old pump and place it on the new one.

Did you find this story helpful?

Thanks for voting and helping fellow customers!

1 of 1 people found this instruction helpful

Tool Type:

Pressure Washer

Parts Used:

Thermal Relief Valve - 678169004

Pressure Washer Pump - 308653093

Repair Difficulty:

Easy

Time Spent Repairing:

Less than 15 minutes

Tools Used:

Socket set, Wrench Set

Pump cracked

Removed the three bolts that hold the pump to the engine
Removed the pump
Pushed on the new pump, lining up the key and key way
Tightened the three bolts
Installed the new thermal relief valve

Did you find this story helpful?

Thanks for voting and helping fellow customers!

1 of 1 people found this instruction helpful

Tool Type:

Pressure Washer

Parts Used:

Thermal Relief Valve - 678169004

Pressure Washer Pump - 308653093

Repair Difficulty:

Easy

Time Spent Repairing:

15-30 minutes

Tools Used:

Socket set, Pry Bar

Pump had no pressure

Watched video on how to remove pump and install pump. Once received in mail installed with no problem. https://www.youtube.com/watch?v=c_Y9vXATSCg

Did you find this story helpful?

Thanks for voting and helping fellow customers!

Reviews

Average Rating (out of 5):

24 Reviews

Click to filter by ratings:

5 stars

4 stars

3 stars

2 stars

1 stars

Sort by:

Highest Rating
Most Recent

< PREV

NEXT >

easy repair

working great , fit perfectly. thank you

Peter - July 20, 2023 Verified Purchase

Perfect fit. It arrived fast and great price

Pressure washer pump

Guest - June 14, 2023 Verified Purchase

Easy repair, works great!

Easy to install. Pump operates flawless.

Guest - May 22, 2023 Verified Purchase

Pressure washer pump.

Arrived quick. Easy to put on. The only thing I had trouble with was getting the pump on the shaft with the key. A couple light taps with a rubber mallet and was good to go. Clean and lightly lube the shaft and key. Works great. Thanks. I recommend this company for parts.

Guest - August 21, 2022 Verified Purchase

Another diy success

Replacement pump for a gas powered power washer. Relatively simple to remove and replace. Gas motor has plenty of life left, pump had given up so for 1/3 the cost of a whole new unit I am back up and running.

Guest - July 3, 2021 Verified Purchase

Every thing went great just like last time

Every thing fit and it is working ok. Thank you

Guest - June 16, 2021 Verified Purchase

The pump arrived and was an exact duplicate of the original.

Was an easy installation and the pressure washer is working again.

Guest - June 12, 2021 Verified Purchase

worked as expected

perfect fit no problems installing. quick delivery

Guest - September 30, 2020 Verified Purchase

Saved money with no hassle replacement

Product was what I expected. No hassle. Website provided easy to follow installation video.

Guest - June 15, 2020 Verified Purchase

Easy repair

Super easy to fix. I ordered the wrong pump. Return process is easy as well. Super happy!

Guest - April 6, 2020 Verified Purchase

Verified Purchase

eReplacementParts Team

Sort by:

Highest Rating
Most Recent

< PREV

NEXT >

Product Information