*This part replaces obsolete part #: 664459-1.
Product Information
Specifications
Length: 8' Gauge: 14 Wires: 2 Type: Bare Wire |
Description:
This cord is a genuine Makita replacement part and is sold individually. It is constructed with tough, thick outer rubber insulation for a long service life. Over time, power tool cords will wear out or become frayed. We recommend replacing a cord as soon as signs of wear are visible. Power Cord Specifications: |
Frequently Purchased With
Compatibility
the 150+ compatible machines
This part is compatible with the following machines:
Makita
LS1013 Miter Saw
LS1013 Miter Saw
LS1212 Miter Saw
LS1212 Miter Saw
2703 Table Saw
2703 Table Saw
2414B Chop Saw
2414B Chop Saw
2702 Table Saw
2702 Table Saw
3612 Router
3612C Router
4110C Angle Cutter
4110C Angle Cutter
9627 Grinder
9000BL Grinder
LS1011N Compound Miter Saw
LS1011N Compound Miter Saw
LS1030N Miter Saw
LS1030N Miter Saw
LS1040 Miter Saw
LS1040 Miter Saw
LS1045 Miter Saw
LS1045 Miter Saw
LS1211 Miter Saw
LS1211 Miter Saw
9029 Grinder
9049 Grinder
9069 Angle Grinder
2414NB Chop Saw
2414NB Chop Saw
LC1230 Chop Saw
LC1230 Chop Saw
9067L Angle Grinder
LS1220 Compound Miter Saw
LS1220 Compound Miter Saw
9040L Angle Sander
2030S Jointer
2414DB Portable Cut Off Saw
2414DB Portable Cut Off Saw
9060L Angle Sander
2012NB Planer
9077SL Angle Grinder
5007NH Circular Saw
5007NH Circular Saw
5007NL Circular Saw
5007NL Circular Saw
9047L Angle Grinder
LS1214 Dual Slide Compound Miter Saw
LS1214 Dual Slide Compound Miter Saw
4112H Angle Cutter
LS1221 Compound Miter Saw
LS1221 Compound Miter Saw
GA7011C Angle Grinder
5007FAK Circular Saw
5007FAK Circular Saw
5007FK Circular Saw
5007FK Circular Saw
JR3070CT Reciprocating Saw
JR3070CT Reciprocating Saw
LS1013F Miter Saw
LS1013F Miter Saw
2704 Table Saw
2704 Table Saw
LS1013FL Compound Miter Saw
LS1013FL Compound Miter Saw
LS1040F Compound Miter Saw
LS1040F Compound Miter Saw
LS1013L Compound Miter Saw
LS1013L Compound Miter Saw
5008FA Circular Saw
5008FA Circular Saw
5007MGA Magnesium Circular Saw
5007MGA Magnesium Circular Saw
4114 Angle Cutter
LS1013 Miter Saw
LS1212 Miter Saw
LS1212 Miter Saw
2703 Table Saw
2703 Table Saw
2414B Chop Saw
2414B Chop Saw
2702 Table Saw
2702 Table Saw
3612 Router
3612C Router
4110C Angle Cutter
4110C Angle Cutter
9627 Grinder
9000BL Grinder
LS1011N Compound Miter Saw
LS1011N Compound Miter Saw
LS1030N Miter Saw
LS1030N Miter Saw
LS1040 Miter Saw
LS1040 Miter Saw
LS1045 Miter Saw
LS1045 Miter Saw
LS1211 Miter Saw
LS1211 Miter Saw
9029 Grinder
9049 Grinder
9069 Angle Grinder
2414NB Chop Saw
2414NB Chop Saw
LC1230 Chop Saw
LC1230 Chop Saw
9067L Angle Grinder
LS1220 Compound Miter Saw
LS1220 Compound Miter Saw
9040L Angle Sander
2030S Jointer
2414DB Portable Cut Off Saw
2414DB Portable Cut Off Saw
9060L Angle Sander
2012NB Planer
9077SL Angle Grinder
5007NH Circular Saw
5007NH Circular Saw
5007NL Circular Saw
5007NL Circular Saw
9047L Angle Grinder
LS1214 Dual Slide Compound Miter Saw
LS1214 Dual Slide Compound Miter Saw
4112H Angle Cutter
LS1221 Compound Miter Saw
LS1221 Compound Miter Saw
GA7011C Angle Grinder
5007FAK Circular Saw
5007FAK Circular Saw
5007FK Circular Saw
5007FK Circular Saw
JR3070CT Reciprocating Saw
JR3070CT Reciprocating Saw
LS1013F Miter Saw
LS1013F Miter Saw
2704 Table Saw
2704 Table Saw
LS1013FL Compound Miter Saw
LS1013FL Compound Miter Saw
LS1040F Compound Miter Saw
LS1040F Compound Miter Saw
LS1013L Compound Miter Saw
LS1013L Compound Miter Saw
5008FA Circular Saw
5008FA Circular Saw
5007MGA Magnesium Circular Saw
5007MGA Magnesium Circular Saw
4114 Angle Cutter
GA7021 Angle Grinder
GA7020 Angle Grinder
GA9020 Angle Grinder
GA7040S Angle Grinder
9607BL 6000RPM Grinder
2704X1 10" Table Saw
2704X1 10" Table Saw
LS1214FL 12" Dual Slide Compound Miter Saw
LS1214FL 12" Dual Slide Compound Miter Saw
GA9040S 9" 15A Soft-Start Technology Angle Grinder
LS1214L 12" Dual Slide Compound Miter Saw with Laser
LS1214L 12" Dual Slide Compound Miter Saw with Laser
2703X1 15A 10" Table Saw
2703X1 15A 10" Table Saw
5104 14A 10-1/4" Circular Saw
5104 14A 10-1/4" Circular Saw
3612BR Router
2705 10 in. Contractor Table Saw
2705 10 in. Contractor Table Saw
LS1016L 10" Dual Slide Miter Saw
LS1016L 10" Dual Slide Miter Saw
5007NK 7-1/4" Circular Saw
5007NK 7-1/4" Circular Saw
RP1800 3-1/4 HP Plunge Router
RP2301FC 3-1/4 HP Plunge Router
LS1016LX 10" Dual Slide Compound Miter Saw
LS1016LX 10" Dual Slide Compound Miter Saw
LS1216L 12" Dual Slide Compound Miter Saw
LS1216L 12" Dual Slide Compound Miter Saw
LS1216LX 12" Dual Slide Compound Miter Saw
LS1216LX 12" Dual Slide Compound Miter Saw
5007MG Magnesium Circular Saw
5007MG Magnesium Circular Saw
LS1016 Dual Bevel Slide Compound Miter Saw
LS1016 Dual Bevel Slide Compound Miter Saw
5007FA 7-1/4" Circular Saw with Brake
5007FA 7-1/4" Circular Saw with Brake
5007F 7-1/4" Circular Saw with Brake
5007F 7-1/4" Circular Saw with Brake
9609B 7" Disc Grinder
9607B 7" Disc Grinder
5007NFA Circular Saw
5007NFA Circular Saw
5007N Circular Saw
5007N Circular Saw
LS1016LX5 10" Dual Slide Compound Miter Saw with Laser and Stand
LS1016LX5 10" Dual Slide Compound Miter Saw with Laser and Stand
LS1216LX4 12" Dual Slide Compound Miter Saw with Laser and Stand
LS1216LX4 12" Dual Slide Compound Miter Saw with Laser and Stand
2705X1 10" Contractor Table Saw with Stand
2705X1 10" Contractor Table Saw with Stand
EC-1235 14-Inch Angle Cutter
2030SZ Planer
2703 (Type 1) Saw
2703 (Type 2) Saw
3612B Misc
3612BRA Misc
4114X Saw
5007LNK Saw
5007NFAK (Type 1) Saw
5007NFAK (Type 2) Saw
5007NFAK (Type 3) Saw
5007NFA (Type 1) Saw
5007NFA (Type 2) Saw
5007NFA (Type 3) Saw
5007NFK (Type 1) Saw
5007NFK (Type 2) Saw
5007NFK (Type 3) Saw
5007NF (Type 1) Saw
5007NF (Type 2) Saw
5007NF (Type 3) Saw
5007NHK Saw
5007NLK Saw
5007N (Type 2) Saw
5007N (Type 3) Saw
GA7020 Angle Grinder
GA9020 Angle Grinder
GA7040S Angle Grinder
9607BL 6000RPM Grinder
2704X1 10" Table Saw
2704X1 10" Table Saw
LS1214FL 12" Dual Slide Compound Miter Saw
LS1214FL 12" Dual Slide Compound Miter Saw
GA9040S 9" 15A Soft-Start Technology Angle Grinder
LS1214L 12" Dual Slide Compound Miter Saw with Laser
LS1214L 12" Dual Slide Compound Miter Saw with Laser
2703X1 15A 10" Table Saw
2703X1 15A 10" Table Saw
5104 14A 10-1/4" Circular Saw
5104 14A 10-1/4" Circular Saw
3612BR Router
2705 10 in. Contractor Table Saw
2705 10 in. Contractor Table Saw
LS1016L 10" Dual Slide Miter Saw
LS1016L 10" Dual Slide Miter Saw
5007NK 7-1/4" Circular Saw
5007NK 7-1/4" Circular Saw
RP1800 3-1/4 HP Plunge Router
RP2301FC 3-1/4 HP Plunge Router
LS1016LX 10" Dual Slide Compound Miter Saw
LS1016LX 10" Dual Slide Compound Miter Saw
LS1216L 12" Dual Slide Compound Miter Saw
LS1216L 12" Dual Slide Compound Miter Saw
LS1216LX 12" Dual Slide Compound Miter Saw
LS1216LX 12" Dual Slide Compound Miter Saw
5007MG Magnesium Circular Saw
5007MG Magnesium Circular Saw
LS1016 Dual Bevel Slide Compound Miter Saw
LS1016 Dual Bevel Slide Compound Miter Saw
5007FA 7-1/4" Circular Saw with Brake
5007FA 7-1/4" Circular Saw with Brake
5007F 7-1/4" Circular Saw with Brake
5007F 7-1/4" Circular Saw with Brake
9609B 7" Disc Grinder
9607B 7" Disc Grinder
5007NFA Circular Saw
5007NFA Circular Saw
5007N Circular Saw
5007N Circular Saw
LS1016LX5 10" Dual Slide Compound Miter Saw with Laser and Stand
LS1016LX5 10" Dual Slide Compound Miter Saw with Laser and Stand
LS1216LX4 12" Dual Slide Compound Miter Saw with Laser and Stand
LS1216LX4 12" Dual Slide Compound Miter Saw with Laser and Stand
2705X1 10" Contractor Table Saw with Stand
2705X1 10" Contractor Table Saw with Stand
EC-1235 14-Inch Angle Cutter
2030SZ Planer
2703 (Type 1) Saw
2703 (Type 2) Saw
3612B Misc
3612BRA Misc
4114X Saw
5007LNK Saw
5007NFAK (Type 1) Saw
5007NFAK (Type 2) Saw
5007NFAK (Type 3) Saw
5007NFA (Type 1) Saw
5007NFA (Type 2) Saw
5007NFA (Type 3) Saw
5007NFK (Type 1) Saw
5007NFK (Type 2) Saw
5007NFK (Type 3) Saw
5007NF (Type 1) Saw
5007NF (Type 2) Saw
5007NF (Type 3) Saw
5007NHK Saw
5007NLK Saw
5007N (Type 2) Saw
5007N (Type 3) Saw
Products Compatibility
Repair Guides
Articles:
This article contains tips and basic steps for replacing power cords for most types of power tools, machines, and other ...
September 18, 2009
|
Questions & Answers for Power Cord
No questions have been asked yet
Repair Instructions: Submitted by Customers Like You
1 of 1 people found this instruction helpful
Tool Type:
Circular Saw
Parts Used:
Repair Difficulty:
Easy
Time Spent Repairing:
Less than 15 minutes
Tools Used:
Screwdriver, Pliers, Wire stripper
Power cord was cut in half.
Removed saw housing screws.
Power cord connections are in the handle where the trigger is.
Disconnect broken cord from connectors. (Makita had a plastic hub almost like a quick connect but with screws to secure the wire).
Remove the thick rubber that goes over the wire where it meets the saw housing.
Put the rubber on new cord.
Strip the rubber on the new cord and attach to the connects on saw.
Replace housing and insert all removed screws.
Plug in and saw some wood!
Power cord connections are in the handle where the trigger is.
Disconnect broken cord from connectors. (Makita had a plastic hub almost like a quick connect but with screws to secure the wire).
Remove the thick rubber that goes over the wire where it meets the saw housing.
Put the rubber on new cord.
Strip the rubber on the new cord and attach to the connects on saw.
Replace housing and insert all removed screws.
Plug in and saw some wood!
Did you find this story helpful?
Thanks for voting and helping fellow customers!
1 of 1 people found this instruction helpful
Tool Type:
Grinder
Parts Used:
Repair Difficulty:
Easy
Time Spent Repairing:
15-30 minutes
Tools Used:
Screwdriver
Cracked power cord.
Took apart and replaced the old cord with the new one.
Did you find this story helpful?
Thanks for voting and helping fellow customers!
1 of 1 people found this instruction helpful
Tool Type:
Circular Saw
Parts Used:
Repair Difficulty:
Medium
Time Spent Repairing:
1-2 hours
Tools Used:
Screwdriver, Wrench Set, Snap ring pliers
Trigger was loose in the handle and wouldn't work predictably. The housing was broken where the trigger mounts, allowing the movement.
You will have to take the saw mostly apart for this repair, but parts cost a lot less than a new saw if you don't mind the repair work. Start by removing the blade, washers, and bolt. Remove the foot from the saw by removing the pivot screw/nut at the front and the adjustment bolt from the rear (remove the set screw on the lever, then the lever, then the nut and bolt. Remove the blade guard by removing the snap ring, stop button, and return spring. Remove the drive pud (what the blade bolts to) by removing the four retaining screws. Remove the blade housing by removing the screws from the backside. Remove the handle cover. Remove the white plastic cover behind the blade housing. Pull the armature out of the field coil (might have to tap on the back of the motor housing to get the bearing out of the bore, otherwise it's held in with magnetic force). Carefully remove the wiring from the handle for the cord, trigger, and light. Remove the field coil screws and the coil (turning the housing over and thumping it against a wood block with release it; it's pressure fit). Reinstall the field coil into the new motor housing (line up the screw holes and tap it in with a drift ot screwdriver until it seats). Reinstall the field coil screws. Carefully route the wiring through the guides in the housing. If the cord needs replacement now's a good time. The rest of reassembly is just the reverse of disassembly. Be sure to test the saw when done. These are relatively simple tools to repair, just take your time and snap some pictures if you need to.
Did you find this story helpful?
Thanks for voting and helping fellow customers!
1 of 1 people found this instruction helpful
Tool Type:
Miter Saw
Repair Difficulty:
Easy
Time Spent Repairing:
15-30 minutes
Tools Used:
Screwdriver
Cord shorted & dust bag was worn out.
Remove handle half, take note of where all the internal part are. Remove cord clamp. Disconnect cord from switch. Remove the cord relief and slid it on the new cord. Connect the new cord to the switch. Install cord clamp. Assemble handle assembly.
Put new bag on dust nozzle.
Put new bag on dust nozzle.
Did you find this story helpful?
Thanks for voting and helping fellow customers!
Tool Type:
Router
Repair Difficulty:
Easy
Time Spent Repairing:
15-30 minutes
Tools Used:
Screwdriver, Phillips and straight
Power cord dry rot
1. Removed the switch housing
2. Removed the old cord and guard
3. Trimmed ends on new cord
4. Installed the cord through the new cord guard
5. Installed the new cord in the switch.
6. Tested router worked fine
2. Removed the old cord and guard
3. Trimmed ends on new cord
4. Installed the cord through the new cord guard
5. Installed the new cord in the switch.
6. Tested router worked fine
Did you find this story helpful?
Thanks for voting and helping fellow customers!
Tool Type:
Circular Saw
Parts Used:
Repair Difficulty:
Medium
Time Spent Repairing:
15-30 minutes
Tools Used:
Screwdriver, Wire stripper
Damaged power cord
Removed the access plate from the handle (4 screws), disconnected the old cord and used the cord as a model for cutting the new cords connection points. Installed the new cord and replaced the access plate.
Did you find this story helpful?
Thanks for voting and helping fellow customers!
Tool Type:
Circular Saw
Parts Used:
Repair Difficulty:
Easy
Time Spent Repairing:
15-30 minutes
Tools Used:
Screwdriver
Cut cord
Removed old cord
Did you find this story helpful?
Thanks for voting and helping fellow customers!
Tool Type:
Chop Saw
Parts Used:
Repair Difficulty:
Medium
Time Spent Repairing:
30-60 minutes
Tools Used:
Screwdriver, Pliers, Wrench Set
power cord was bad.
removed old power cord and replaced.
Did you find this story helpful?
Thanks for voting and helping fellow customers!
Tool Type:
Router
Repair Difficulty:
Easy
Time Spent Repairing:
Less than 15 minutes
Tools Used:
Screwdriver
Old power cord was dry rotted and had shorted out
Removed 2 Philips head screws to expose electrical junction box. Next I loosened 2 terminal connector screws inside junction box and removed the old cord. Attached new cord into the terminal connectors and tightened! Replaced junction box cover screws. This old Makita router was made in 1993 so the cord had seen better days! Works like a champ now!
Did you find this story helpful?
Thanks for voting and helping fellow customers!
Tool Type:
Circular Saw
Repair Difficulty:
Hard
Time Spent Repairing:
More than 2 hours
Tools Used:
Screwdriver, pry bar
Saw was Hard to Separate
Pulled Case Apart
Did you find this story helpful?
Thanks for voting and helping fellow customers!
show more
Reviews
18 Reviews
Average Rating (out of 5):
Click to filter by ratings:
5 stars
17
4 stars
1
3 stars
0
2 stars
0
1 stars
0
< PREV
- 1
- 2
good parts fit and worked
good sales person , fast shipping correct parts.
Guest -
December 2, 2023
Verified Purchase
Easy repair
Part arrived quickly and my Makita replacement cord matched the original.
Guest -
April 4, 2023
Verified Purchase
You helped me fix my mistake
While cutting a piece of plywood for my wife I made an embarrassing mistake by cutting thru to cord on my Makita skill saw. You had exactly what I needed along with the instructions on how to replace the electrical cord on my saw. It is just like new again. Thanks!
Guest -
March 20, 2023
Verified Purchase
quick repair
arrived on time in good condition
Tony -
February 20, 2023
Verified Purchase
Repair worked as expected
Received the power cord in a timely fashion. The cord was an exact fit and within 20 my circular saw was up and running
Guest -
June 7, 2022
Verified Purchase
Cord Replacement
My Husband cut his corn to his saw, looked up on the computer to find a new core, eRepacementParts came up and they had what he needed, the cord came in quick, thank you
Guest -
November 22, 2021
Verified Purchase
product arrived on time and installation was easy.
power cord was exactly what was advertised and the installation was easy to do. thanks
Guest -
November 15, 2021
Verified Purchase
Easy repair great part and have my miter saw back. Thank you will buy again.
Excellent service super fast shipping and I Thank You 🙏
Guest -
September 6, 2021
Verified Purchase
It fit and works great
The part arrived when you said it would and my saw is working
Guest -
June 12, 2021
Verified Purchase
The right part, delivered promptly. Thanks!
The right part, delivered promptly. Thanks!
Guest -
February 8, 2021
Verified Purchase
Verified Purchase
eReplacementParts Team
< PREV
- 1
- 2
Product Information
Repair Guides
Articles:
This article contains tips and basic steps for replacing power cords for most types of power tools, machines, and other ...
September 18, 2009
|