Install
Videos!

Watch The
Repair Video

Cord 3604460555

Part Number: 3604460555

19 Reviews

Order within the next 5 hours
and your part ships today!

Questions & Answers

Repair Instructions

*This part replaces obsolete part #: 2604460189, 2604460229, 2604460188, 2610930930, 2604460231, SC707-1, 3604460049, 2604460056, 1614460010, 1604460022, 2604460270, 2604460220, 2604460186, 2604460187, 1604460336, 2604460303, 1604460276, 3604460045, 1604460325, 2604460239 and 1614460016.

Product Information

Specifications

Length: 6.5'
Gauge: 18
Wires: 2
Type: Bare Wire

Description:

This cord is a genuine OEM replacement part and is sold individually.
Power Cord Specifications:
2 Wires.
18 Gauge.
2 Prongs.
6-1/2 Feet Long.

It is constructed with thick insulation for long service life and a strong two-prong plug. This cord is compatible with the tools listed below. It can work for other applications and for other tools as well, but compatibility is not guaranteed.
Installation of this part requires the new cord wires be stripped and to fit correctly into the wire terminals.

Warning: California's Proposition 65

Frequently Purchased With

Grommet
$4.99

Grommet
$5.19

Grommet
$4.99

Carbon Brush S..
$11.06

Carbon Brush S..
$4.99

Carbon Brush S..
$3.99

Compatibility

This part is compatible with the following machines:

Skil

9200 (F012920000) Reciprocating Saw
9200 (F012920000) Reciprocating Saw
9250 (F012925000) Reciprocating Saw

9250 (F012925000) Reciprocating Saw
9320 (F0129320AA) 4-1/2 in. Mini Grinder
9325 (F0129325AA) 4-1/2 in. Mini Grinder

Bosch

1581AVS (0601581666) Jig Saw
1584VS (0601584639) "Clic" Jig Saw
1584VS (0601584639) "Clic" Jig Saw
1584AVS (0601584651) Jig Saw
1584AVS (0601584651) Jig Saw
1584DVS (0601584839) Dustless "Clic" Jig Saw
1584DVS (0601584839) Dustless "Clic" Jig Saw
B4201 (0601587635) Jig Saw
B4201 (0601587635) Jig Saw
1587VS (0601587639) "Clic" Jig Saw
1587VS (0601587639) "Clic" Jig Saw
1587AVS (0601587651) Jig Saw
1587AVS (0601587651) Jig Saw
1587AVS (0601587651) Jig Saw
1587AVS (0601587651) Jig Saw
1587DVS (0601587839) Dustless "Clic" Jig Saw
1587DVS (0601587839) Dustless "Clic" Jig Saw
1594 (0601594039) Planer
1608LX (0601608434) Laminate Trimmer
1609 (0601609034) Laminate Trimmer
1638 (0601638139) Rotary Cutter
1638 (0601638239) Rotary Cutter
1639 (0601638339) Rotary Cutter
1700A (0601700039) 4-1/2" Mini Grinder
1700 (0601700239) 4-1/2" Mini Grinder
1701A (0601701039) 5" Mini Grinder
1701 (0601701239) 5" Mini Grinder
1703EVS (0601703239) 5" Mini Grinder
1703AEVS (0601703739) 5" Mini Grinder
1706E (0601706239) 6" Mini Grinder
1706AE (0601706739) 6" Mini Grinder
1710A (0601710039) 4-1/2" Mini Grinder
1710AD (0601710139) 4-1/2" Mini Grinder
1710 (0601710239) 4-1/2" Mini Grinder
1710D (0601710439) 4-1/2" Mini Grinder
1711A (0601711039) 5 inch Mini Grinder
1773A (0601773739) Grinder
PA500 (0601775839) Grinder
1700A (0601800039) Grinder
1701A (0601801039) Grinder
1703AEVS (0601803739) Grinder
1806A (0601806739) Grinder
3230VS (0603230439) Jig Saw
3230VS (0603230439) Jig Saw
B7100 (0603247035) Orbital Sander
3258 (0603258439) Planer
3270D (0603270039) Belt Sander
B7350 (0603270735) Belt Sander
3270DVS (0603270739) Belt Sander
B1750 (0603272135) Planer
3272A (0603272139) Planer
B9150 (0603273235) Mini Grinder
B7250 (0603283735) Random Orbit Sander
3283DVS (0603283739) Random Orbit Sander
B7150 (0603285135) Sheet Orbital Sander
B1760 (0603296035) Planer
B4100 (0603303735) Jig Saw
B4100 (0603303735) Jig Saw
B7000 (0603307035) Corner Sander
B7001 (0603307735) Corner Sander
3107DVS (0603310639) Random Orbit Sander
B7255 (0603310735) Random Orbit Sander
3107DVS (0603310739) Random Orbit Sander
11200VSR (0603314739) Rotary Hammer
3365 (0603365039) Planer
3365 (0603365139) Planer
11218EVS (0611218739) Hammer Drill
11218EVS (0611218739) Hammer Drill
11221DVS (0611221639) Rotary Hammer
11224VSR (0611224739) Hammer Drill
11224VSR (0611224739) Hammer Drill
11226 VS (0611226539) Hammer Drill

Expand the 150+ compatible machines

Products Compatibility

This item works with the following types of products:

• Drill
• Electric Drill
• Grinder
• Hammer Drill
• Jig saw
• Laminate Trimmer
• Nibbler
• Planer
• Reciprocating Saw
• Rotary Hammer
• Sander
• Saw
• Screwdriver
• Shear

Expand List

Repair Guides

Watch the Repair Video for Cord

Articles:

Replacing Bad, Cut, or Damaged Power Cords on Your Power Tools

This article contains tips and basic steps for replacing power cords for most types of power tools, machines, and other ...

September 18, 2009

Questions & Answers for Cord

Sort by

No questions have been asked yet

Repair Instructions: Submitted by Customers Like You

3 of 4 people found this instruction helpful

Tool Type:

Jig saw

Parts Used:

Cord - 3604460555

Cable Clip - 3132419006

Grommet - 2600703028

Repair Difficulty:

Medium

Time Spent Repairing:

30-60 minutes

Tools Used:

Screwdriver, Pliers, wire stripers

Original cord was cracked and failing

Open up the housing, disconnect old wires, connect the new cord and reassemble the housing.

Did you find this story helpful?

Thanks for voting and helping fellow customers!

2 of 2 people found this instruction helpful

Tool Type:

Grinder

Parts Used:

Cord - 3604460555

On-off Switch - 1607200137

Repair Difficulty:

Medium

Time Spent Repairing:

15-30 minutes

Tools Used:

Screwdriver, Power Drill

Bad switch and cord

Simple repair and cleaning, simply replace switch and cord. Just needed to open up the housing, disconnect wires and reattach the new parts.

Did you find this story helpful?

Thanks for voting and helping fellow customers!

Tool Type:

Jig saw

Parts Used:

Cord - 3604460555

Repair Difficulty:

Easy

Time Spent Repairing:

30-60 minutes

Tools Used:

Screwdriver, Pliers

Power cord was broken.

Took off old cord and reattached new one. Works great!

Did you find this story helpful?

Thanks for voting and helping fellow customers!

Tool Type:

Router

Parts Used:

Cord - 3604460555

Repair Difficulty:

Easy

Time Spent Repairing:

15-30 minutes

Tools Used:

Screwdriver, Solder iron, solder, screw terminals.

Cord was worn out. Needed to be replaced.

Removed screws holding two halves together with torn screwdriver. Removed right angle drive at end of tool.
Unscrew terminals holding wires. Slip boot off of old cord. Put boot on new cord. Attach terminals to new cord. Attach new cord terminals to tool terminals.
Put halves of tool back together. Install screws. Install right angle drive.

Did you find this story helpful?

Thanks for voting and helping fellow customers!

Tool Type:

Grinder

Parts Used:

Cord - 3604460555

Grommet - 1600703031

Repair Difficulty:

Medium

Time Spent Repairing:

30-60 minutes

Tools Used:

Screwdriver, Pliers, Wire crimpers and wire terminals

Bad power cable

1. Removed cover with torx drive screw driver
2. Removed cable clamp
3. Removed screws on wire terminals
4. Trimmed and stripped wires to proper length
5. Crimped new terminals on wire ends (terminals not included with replacement cable)
6. Reconnected terminals
7. Attached cable clamp
8. Replaced 4 screws in cover
The hard part is positioning the screws in their proper location. Space is limited and hard to get screws started

Did you find this story helpful?

Thanks for voting and helping fellow customers!

Tool Type:

Jig saw

Parts Used:

Cord - 3604460555

Repair Difficulty:

Easy

Time Spent Repairing:

15-30 minutes

Tools Used:

Screwdriver, Soldering gun

Cord was frayed near plug.

The easiest new cord I ever put on a hand tool. Bosch did a good job on the design.

Did you find this story helpful?

Thanks for voting and helping fellow customers!

Tool Type:

Sander

Parts Used:

Cord - 3604460555

Repair Difficulty:

Easy

Time Spent Repairing:

15-30 minutes

Tools Used:

Screwdriver, Pliers

Power cord outer jacket was cracking

1. Remove screws to open sander.
2. Remove old power cord from cord clamp.
3. Remove black and white wire from switch/trigger, noting black and white with locations.
4. Insert black and white wires into switch/trigger in same location as previously located.
5. Reinstall cord clamp and assemble sander body halves and install screw in proper locations.
6. Plug into electrical outlet and test operation.

Did you find this story helpful?

Thanks for voting and helping fellow customers!

Tool Type:

Jig saw

Parts Used:

Cord - 3604460555

Repair Difficulty:

Easy

Time Spent Repairing:

15-30 minutes

Tools Used:

Screwdriver

You are very good source for OEM products.

Replaced the old cord with the new one.

Did you find this story helpful?

Thanks for voting and helping fellow customers!

Tool Type:

Jig saw

Parts Used:

Cord - 3604460555

Repair Difficulty:

Easy

Time Spent Repairing:

15-30 minutes

Tools Used:

Screwdriver

Old cord shorted out.

Simply reconnected the new cord and replaced all screws. Had some difficulty getting the cover to properly set in place but finally managed to tap it in with a rubber hammer.

Did you find this story helpful?

Thanks for voting and helping fellow customers!

Tool Type:

Grinder

Parts Used:

Cord - 3604460555

On/off Switch - 1607200086

Grommet - 2600703013

Repair Difficulty:

Easy

Time Spent Repairing:

15-30 minutes

Tools Used:

Screwdriver

Worn out

Remove the screw from the end housing cover
Make a wiring diagram of the switch and where the internal parts are placed
Disconnect the wires from the switch.
Remove the old cord and slide it through the hole in the back cover, place the grommet on the cord. Connect the wires to the switch and hook up the internal parts.
Screw on the end housing cover

Did you find this story helpful?

Thanks for voting and helping fellow customers!

Reviews

Average Rating (out of 5):

19 Reviews

Click to filter by ratings:

5 stars

4 stars

3 stars

2 stars

1 stars

Sort by:

Highest Rating
Most Recent

< PREV

NEXT >

Cord fit perfectly

Ordered the cord I needed and it came within 4 days. Easy repair and the cord fit perfectly

Guest - October 19, 2023 Verified Purchase

Great price and quick service

Ordered the part on Sunday afternoon and received by mail on Thursday morning!

Guest - January 30, 2023 Verified Purchase

Success

The part I ordered was the correct part and it fit perfectly!

Guest - September 8, 2022 Verified Purchase

SkilDrill replacement power cord

The item was the right thickness to replace the worn power cord on my SkilDrill. Installation was simple. I shouldve ordered this 10 years ago

Guest - July 7, 2022 Verified Purchase

power replacement cord

Arrived super fast. Having a place to purchase parts instead of purchasing a new $200 tool was great. repair was easy.

Guest - April 19, 2022 Verified Purchase

Power cord

Thanks

Guest - March 14, 2022 Verified Purchase

Simple process

Quick and easy ordering. Part arrived in timely manner, and was exact replacement. Will use this company again.

Guest - December 15, 2021 Verified Purchase

Easy repair

Power cord was delivered quickly and priced right!

Mark - November 20, 2021 Verified Purchase

easy easy easy

This cord arrived quickly and my husband was able to replace the old cord on his jigsaw in less than 10 minutes, by just watching a youtube video.

Guest - May 12, 2021 Verified Purchase

Easy peasy!

Typed the model number of my drill into my browser and it took me directly to your site. Found the part and ordered it without a problem. Arrived two days later and now the drill works again. Great job!

Guest - February 16, 2021 Verified Purchase

Verified Purchase

eReplacementParts Team

Sort by:

Highest Rating
Most Recent

< PREV

NEXT >

Product Information

Repair Guides

Watch the Repair Video for Cord

Articles:

Replacing Bad, Cut, or Damaged Power Cords on Your Power Tools

This article contains tips and basic steps for replacing power cords for most types of power tools, machines, and other ...

September 18, 2009