Easy
Less than 15 minutes
The platen assembly is used in sheet sanders. It is an OEM Ridgid part directly sourced from the manufacturer. The platen attaches the rubber cushion and the retaining plate. It helps to hold the sandpaper in place and is made of plastic and metal. This item is available as an individual replacement part.
Platen Assembly 200202537
OEM part for: Ridgid
Part Number: 200202537
$11.68
In Stock
Order within the next 11 hours and your part ships today! 
Jump To:
Frequently Purchased Together ?
Compatibility
This item works with the following types of products:
- Sander Parts
Customer Part Reviews ?
Average Rating (out of 5):
Click to filter by ratings:
5 stars
6
4 stars
0
3 stars
0
2 stars
0
1 stars
0
< PREV
- 1
Perfect!
Had to call to figure out what I needed and the phone guy was very helpful. Got exactly what I needed, and quickly too.
Guest -
April 6, 2023
Verified Purchase
RIGID palm sander
They had the very part I needed by PART # and shipped it quickly. Never expected to find this part so easily.
Guest -
May 28, 2022
Verified Purchase
OEM - Just what I expected.
Poor original design - the pressure plate that holds the front of the sandpaper, while convenient, has worn over the years and will no longer hold sandpaper - even with extra layers of paper installed. This gets me back in business.
Guest -
January 13, 2022
Verified Purchase
Platen replacement
Ordered replacement for Ridgid 1/4” sheet sander. Arrived sooner than expected. Easy to replace and back to work.
Willis -
May 5, 2021
Verified Purchase
Easy replacement
The part was the exact part I needed. I was able to put it back on with no problem. Ordering and paying also was easy.
Guest -
July 21, 2020
Verified Purchase
Great part fits perfect
Arrived as accordingly fits perfect. Parts available great well site
Guest -
October 19, 2019
Verified Purchase
t
t
t -
t days ago
Verified Purchase
eReplacementParts Team
t
Questions & Answers ?
Our customer Service team is at the ready daily to answer your part and product questions.
Ask our Team
We have a dedicated staff with decades of collective experience in helping customers just like you purchase parts to repair their products.
Does this fit my product?Questions & Answers for Platen Assembly
Does the assembly come with the two hold down clamps?
Peter
for model number 2501
asked on 2024-01-04
Hi Peter,
Thank you for your question. The part number for the spring clamp assembly is 303614004. This Clamp helps to secure the sandpaper to the plate. We hope this helps!
eReplacementParts Team January 04, 2024
Does the platen assembly for Ridgid R2501 come with the hold down screws?
Roger
for model number R2501
asked on 2022-07-09
Hi Roger,
Thank you for your question. The screws that secure the sander pad are sold separately. The part number listed under your model number for the screw is 661043002. They are sold individually. If you need help placing an order for them, customer service is open 7 days a week and anyone will be happy to assist you. Please feel free to give us a call. We look forward to hearing from you!
eReplacementParts Team July 09, 2022
Customer Repair Instructions ?
All our customer repair instructions are solicited directly from other customers just like you who have purchased and replaced this exact part.
Unable to hold the sandpaper.
Jose\' - June 14, 2017
👍 3 of 3 people found this instruction helpful
Tool Type
Sander
Difficulty
Easy
Time
15-30 minutes
Tools Used
Screwdriver
Parts Used
Replaced the platen assembly.
Did you find this story helpful?
Thanks for voting and helping fellow customers!
Platten worn out
Paul - December 2, 2018
👍 2 of 2 people found this instruction helpful
Tool Type
Sander
Difficulty
Easy
Time
Less than 15 minutes
Tools Used
Screwdriver, hex head set
Parts Used
Take 4 screws out gently pry platen away from motor, re attach new one with hex screws.
Did you find this story helpful?
Thanks for voting and helping fellow customers!
Sandpaper kept breaking loose
Xavier - May 18, 2018
👍 2 of 2 people found this instruction helpful
Tool Type
Sander
Difficulty
Easy
Time
15-30 minutes
Tools Used
, T20 star
Remove four screws to remove plate and padding.
Replace plate and padding with screws
Replace plate and padding with screws
Did you find this story helpful?
Thanks for voting and helping fellow customers!
Sand paper clip broke
GILBERT - April 2, 2018
👍 1 of 1 people found this instruction helpful
Tool Type
Sander
Difficulty
Easy
Time
Less than 15 minutes
Tools Used
Screwdriver
1. Removed four screws to remove assembly
2. Reinstall assembly
2. Reinstall assembly
Did you find this story helpful?
Thanks for voting and helping fellow customers!
Sander would not hold sandpaper in place
Marge - March 17, 2023
Tool Type
Sander
Difficulty
Easy
Time
Less than 15 minutes
Tools Used
, Allen wrenches
Parts Used
Changed platen assembly provided.
Did you find this story helpful?
Thanks for voting and helping fellow customers!
The sanding pad was worn out along with the planten assembly. Would not hold sand paper sheets.
Craig - January 31, 2018
Tool Type
Sander
Difficulty
Easy
Time
Less than 15 minutes
Tools Used
Screwdriver
Removed the 4 screws in the bottom of the sander pad. The pad plate and cushion came off. Grabbed the platen assembly by the sides and lifted it off the motor assembly. The only screws holding it in place are the 4 in the sander pad. Pushed the new platen assembly in place, replaced the sanding pad and cushion with the new one and screwed the holding everything in place.
Word of advise. If ordering, order several sanding pad plates and cushions. They wear out fast.
Very easy to do.
Word of advise. If ordering, order several sanding pad plates and cushions. They wear out fast.
Very easy to do.
Did you find this story helpful?
Thanks for voting and helping fellow customers!
Platen would not hold the sandpaper securely. A good sander was not usable.
Carl - May 18, 2017
Tool Type
Sander
Difficulty
Easy
Time
Less than 15 minutes
Tools Used
Screwdriver
Removed 4 small screws from the base. Used air hose to clean out sawdust. Lined up the new base set the 4 screws. Tested. Easy repair.
Did you find this story helpful?
Thanks for voting and helping fellow customers!
OEM stands for Original Equipment Manufacturer and means the part you’re buying is sourced directly from the manufacturer who made your product. At eReplacementParts, we sell only genuine OEM parts, guaranteeing the part you’re purchasing is of better design and of higher quality than aftermarket parts.
Our product descriptions are a combination of data sourced directly from the manufacturers who made your product as well as content researched and curated by our content & customer service teams. This content is edited and reviewed internally before being made public to customers.
Our customer service team are at the ready daily to answer your part and product questions. We have a dedicated staff with decades of collective experience in helping customers just like you purchase parts to repair their products.
All our part reviews are solicited directly from other customers who have purchased this exact part. While we moderate these reviews for profanity, offensive language or personally identifiable information, these reviews are posted exactly as submitted and no alterations are made by our team.
All our customer repair instructions are solicited directly from other customers just like you who have purchased and replaced this exact part. While we moderate these reviews for profanity, offensive language or personally identifiable information, these reviews are posted exactly as submitted and no alterations are made by our team.
Based on data from past customer purchasing behaviors, these parts are most commonly purchased together along with the part you are viewing. These parts may be necessary or helpful to replace to complete your current repair.
All our installation videos are created and produced in collaboration with our in-house repair technician, Mark Sodja, who has helped millions of eReplacementParts customers over the last 13 years repair their products. Mark has years of experience in selling and repairing both commercial and residential products with a specialty in gas-powered equipment.
This data is collected from customers who submitted a repair instruction after replacing this exact part. Customers can rate how easy the repair was to complete and how long it took. We aggregate this data to provide a repair rating that allows customers to quickly determine the difficulty and time needed to perform their own repair.
