Easy
Less than 15 minutes
This is a genuine OEM replacement part designed for use with Ryobi Sander. This assembly consists of Plastic Platen with Metal Springs, Foam Pad with Metal Backing Plate and a Dust Shield. This is the part of the sander that holds the Sandpaper.
Please note, it does not include the bearing.
To replace this Platen Assembly you would need a Phillips Head Screwdriver.
• Remove the 4 Screws holding old Platen
• Take off the old Platen by pulling it off the Bearing
• Press new Platen on the Bearing
• Attach the new Assembly using the 4 Screws
Platen Assembly 039066005054
OEM part for: Ryobi
Part Number: 039066005054
$4.99
In Stock
Order within the next 11 hours and your part ships today! 
Jump To:
Product Description ?
- Classification: Part
- Weight: 0.20 lbs.
- Shipping: Ships Worldwide
Frequently Purchased Together ?
Compatibility
This part will fit the following 3 machines
Ryobi
S652DK 1/4 Sheet Double Insulated Sander View Diagrams & Manuals
S652D S652D 1/4 Sheet Double Insulated Sander View Diagrams & Manuals
S652DG S652DG 1/4 Sheet Double Insulated Sander View Diagrams & Manuals
This item works with the following types of products:
- Sander Parts
This part replaces obsolete part #: 039066005044, 039066005019
Customer Part Reviews ?
Average Rating (out of 5):
Click to filter by ratings:
5 stars
32
4 stars
1
3 stars
1
2 stars
0
1 stars
0
< PREV
- 1
- 2
- 3
Easy fix
Easy to replace
Brett -
June 26, 2023
Verified Purchase
Super fast delivery
Fit perfect
Guest -
March 20, 2023
Verified Purchase
Work Done
The part we ordered fit perfectly ✨ we were able to complete our project without having to buy a whole new sander ✨ Thank you!
Rosemary -
January 30, 2023
Verified Purchase
Planten ass.
Thanks the part was an great fit.thankyou for your service .
Guest -
August 2, 2022
Verified Purchase
Sander pad replacement
This was a great replacement part at a good price. I received it in better than normal shipping time.
Guest -
April 11, 2022
Verified Purchase
Easy to find parts
Extremely easy to located what you need! Recommend shopping here!
Anonymous -
February 4, 2022
Verified Purchase
excellent fit
fast delivery and the part fit perfect
Guest -
August 26, 2021
Verified Purchase
Simple Repair, great part, past shipping!
Unbeknownst to me, my son used my sander to work on a rather rough piece of wood. Rather than letting the sander do the work, he used too much muscle and wore the pad on the platen completely out. The replacement part is very close to OEM (the wires that hold the sandpaper down aren't exactly the same) and fit great. My sander is back in action.
Guest -
August 7, 2021
Verified Purchase
Great Service
The part was easy to find on the website. Ordering was simple and it arrived quickly. A perfect shopping experience.
Guest -
July 12, 2021
Verified Purchase
Easy repair
Arrived quickly and worked perfectly
Guest -
June 25, 2021
Verified Purchase
t
t
t -
t days ago
Verified Purchase
eReplacementParts Team
t
Questions & Answers ?
Our customer Service team is at the ready daily to answer your part and product questions.
Ask our Team
We have a dedicated staff with decades of collective experience in helping customers just like you purchase parts to repair their products.
Does this fit my product?Questions & Answers for Platen Assembly
what exactly is the bearing? Does this part come with the two arms that hold the sand paper down ?
Mike
for model number S-605D8/S652DG
asked on 2023-03-02
Hi Mike,
Thank you for your question. Ball bearings are made to reduce friction between two rotating parts. The part number listed under your model number for the ball bearing is 039176001012. If you would like to place an order for it, please call our customer service line and anyone will be happy to assist you. We look forward to hearing from you!
eReplacementParts Team March 02, 2023
Customer Repair Instructions ?
All our customer repair instructions are solicited directly from other customers just like you who have purchased and replaced this exact part.
Locking arms broken/ rubber pad warn on edges
Harry - February 26, 2016
👍 27 of 27 people found this instruction helpful
Tool Type
Sander
Difficulty
Easy
Time
Less than 15 minutes
Tools Used
Screwdriver
Parts Used
New platen came with upgraded arms (I had been using the sander with the broken arms for years) Take off 4 screws that attach the platen. Pry it gently off the bearing (in center)
Push the new platen onto the bearing (making sure it is in the right position) Attach with the
original screws.
Push the new platen onto the bearing (making sure it is in the right position) Attach with the
original screws.
Did you find this story helpful?
Thanks for voting and helping fellow customers!
Just wore out
Larry - July 18, 2016
👍 14 of 14 people found this instruction helpful
Tool Type
Sander
Difficulty
Easy
Time
Less than 15 minutes
Tools Used
Screwdriver
Parts Used
Just removed the screws that held the old platen and secured the new one using the same hardware. Done!
Did you find this story helpful?
Thanks for voting and helping fellow customers!
Platen worn
Steven - June 2, 2016
👍 7 of 7 people found this instruction helpful
Tool Type
Sander
Difficulty
Easy
Time
Less than 15 minutes
Tools Used
Screwdriver
Parts Used
Very simple to install, and reasonably priced. Unscrewed 4 screws and removed the old platen, then screwed in the new platen.
Did you find this story helpful?
Thanks for voting and helping fellow customers!
It was broke, and needed replaced.
Jeremy - January 10, 2016
👍 6 of 6 people found this instruction helpful
Tool Type
Sander
Difficulty
Easy
Time
Less than 15 minutes
Tools Used
Screwdriver
Parts Used
Remove the 4 screws attaching the platen to the sander. Pull platen off of bearing. Press new platen on to bearing and install new platen with the screws.
Did you find this story helpful?
Thanks for voting and helping fellow customers!
My sander had brocken retaining clips.
Gerardo - January 27, 2016
👍 5 of 6 people found this instruction helpful
Tool Type
Sander
Difficulty
Easy
Time
Less than 15 minutes
Tools Used
Screwdriver
Parts Used
Remove the 4 screws attaching the platen assembly to the sander. Then install the new platen assembly with the 4 screws. It was very easy to change the part and the price was great. Thank you.
Did you find this story helpful?
Thanks for voting and helping fellow customers!
Pad had worn out
Jon - February 1, 2019
👍 1 of 1 people found this instruction helpful
Tool Type
Sander
Difficulty
Easy
Time
Less than 15 minutes
Tools Used
Screwdriver
Parts Used
Removed screws, removed old pad, installed new pad and installed screws.
Did you find this story helpful?
Thanks for voting and helping fellow customers!
Retainer spring ends broken off
Evan - September 21, 2016
👍 1 of 1 people found this instruction helpful
Tool Type
Sander
Difficulty
Easy
Time
Less than 15 minutes
Tools Used
Screwdriver, Propane torch
Parts Used
1) Removed 4 screws
2) Removed sander platen.
3) One of the screw heads was filled with paint...burnt it off with propane torch after removal prior to reinstalling.
4) Pushed replacement platen onto bearing.
5) Put 4 screws back and tightened.
2) Removed sander platen.
3) One of the screw heads was filled with paint...burnt it off with propane torch after removal prior to reinstalling.
4) Pushed replacement platen onto bearing.
5) Put 4 screws back and tightened.
Did you find this story helpful?
Thanks for voting and helping fellow customers!
loaned It to a person who used to much pressure and wore through the platen plate.
william - May 11, 2019
Tool Type
Sander
Difficulty
Easy
Time
Less than 15 minutes
Tools Used
Power Drill, hand sander
Parts Used
Just unscrewed the old plate and installed new one.No problem.
Did you find this story helpful?
Thanks for voting and helping fellow customers!
The sanding pad had worn down
Stephanie - April 29, 2019
Tool Type
Sander
Difficulty
Easy
Time
Less than 15 minutes
Tools Used
Screwdriver, None
Parts Used
Removed the original sanding pad and attached the new one. Only tool needed was a screwdriver. Easy least!
Did you find this story helpful?
Thanks for voting and helping fellow customers!
Sanding pad was old and worn
Phyllis - February 11, 2019
Tool Type
Sander
Difficulty
Easy
Time
Less than 15 minutes
Tools Used
Screwdriver, Pliers
Removed the old pad and replaced it with the new.
Did you find this story helpful?
Thanks for voting and helping fellow customers!
Load More Install Stories
OEM stands for Original Equipment Manufacturer and means the part you’re buying is sourced directly from the manufacturer who made your product. At eReplacementParts, we sell only genuine OEM parts, guaranteeing the part you’re purchasing is of better design and of higher quality than aftermarket parts.
Our product descriptions are a combination of data sourced directly from the manufacturers who made your product as well as content researched and curated by our content & customer service teams. This content is edited and reviewed internally before being made public to customers.
Our customer service team are at the ready daily to answer your part and product questions. We have a dedicated staff with decades of collective experience in helping customers just like you purchase parts to repair their products.
All our part reviews are solicited directly from other customers who have purchased this exact part. While we moderate these reviews for profanity, offensive language or personally identifiable information, these reviews are posted exactly as submitted and no alterations are made by our team.
All our customer repair instructions are solicited directly from other customers just like you who have purchased and replaced this exact part. While we moderate these reviews for profanity, offensive language or personally identifiable information, these reviews are posted exactly as submitted and no alterations are made by our team.
Based on data from past customer purchasing behaviors, these parts are most commonly purchased together along with the part you are viewing. These parts may be necessary or helpful to replace to complete your current repair.
All our installation videos are created and produced in collaboration with our in-house repair technician, Mark Sodja, who has helped millions of eReplacementParts customers over the last 13 years repair their products. Mark has years of experience in selling and repairing both commercial and residential products with a specialty in gas-powered equipment.
This data is collected from customers who submitted a repair instruction after replacing this exact part. Customers can rate how easy the repair was to complete and how long it took. We aggregate this data to provide a repair rating that allows customers to quickly determine the difficulty and time needed to perform their own repair.
