Plastite Screw 330019-04

Description:

Genuine Dewalt replacement part, this item is sold individually.
This screw is used in various places in all of the tools listed below
The most common use for this screw is to secure plastic housings together.
It has a Torx T-20 head.

Frequently Purchased With

Bail Handle
$5.77

Screw
$4.99

Handle Assembl..
$42.77

Carrying Handl..
$5.73

Screw
$4.99

Compatibility

This part is compatible with the following machines:

DeWALT

Expand the 150+ compatible machines

Products Compatibility

This item works with the following types of products:

• Cordless Drill
• Drill
• Hammer Drill
• Impact Driver
• Screwdriver

Repair Instructions: Submitted by Customers Like You

2 of 2 people found this instruction helpful

Tool Type:

Hedge Trimmer

Parts Used:

Plastite Screw - 330019-04

Bail Handle - 90546340

Repair Difficulty:

Easy

Time Spent Repairing:

Less than 15 minutes

Tools Used:

Screwdriver

Replace hedge trimmer handle

Very simple.
Line up handle with trimmer
Screw in the screws
3 minutes maximum

Did you find this story helpful?

Thanks for voting and helping fellow customers!

1 of 1 people found this instruction helpful

Tool Type:

Hedge Trimmer

Parts Used:

Plastite Screw - 330019-04

Bail Handle - 90546340

Repair Difficulty:

Easy

Time Spent Repairing:

Less than 15 minutes

Tools Used:

Screwdriver

Handle was broken

Removed the defective handle and replaced with the new one.

Did you find this story helpful?

Thanks for voting and helping fellow customers!

1 of 1 people found this instruction helpful

Tool Type:

Chop Saw

Parts Used:

Plastite Screw - 330019-04

Cord Clamp - 003618-00

Screw - 330045-08

Screw,plastite - 330019-02

Screw - 330045-44

Screw - 330019-32

Screw - 330019-22

Handle Assembly - 393960-00

Switch - 391926-01

Carrying Handle - 396375-00

Repair Difficulty:

Easy

Time Spent Repairing:

30-60 minutes

Tools Used:

Screwdriver

Nothing

Took of broken parts
Replaced with new

Did you find this story helpful?

Thanks for voting and helping fellow customers!

Tool Type:

Hedge Trimmer

Parts Used:

Plastite Screw - 330019-04

Brush - 387542-00

Spacer - 394476-00

Repair Difficulty:

Easy

Time Spent Repairing:

30-60 minutes

Tools Used:

Screwdriver, Pliers

slight vibration

removed cover exposing the motor, cleaned in and around motor, removed old brushes and installed new ones, cleaned and greased lower blade drive assembly, reassembled, and test run, proved smoother and quieter operation .

Did you find this story helpful?

Thanks for voting and helping fellow customers!

Tool Type:

Trimmer

Parts Used:

Plastite Screw - 330019-04

Repair Difficulty:

Easy

Time Spent Repairing:

Less than 15 minutes

Tools Used:

Screwdriver, Torx screwdriver

The two torx screws holding the plastic guard in place worked loose and fell out. I couldn't find them, so I had to order new ones.

1. I put the plastic guard in place
2. Inserted the screws and tightened them down.
3. I will be checking them each time I use the trimmer now.

Did you find this story helpful?

Thanks for voting and helping fellow customers!

Tool Type:

Hedge Trimmer

Parts Used:

Plastite Screw - 330019-04

Switch - 90541380

Repair Difficulty:

Easy

Time Spent Repairing:

30-60 minutes

Tools Used:

Screwdriver, Power Drill, None.

The hedge trimmer motor quit working when attached to an electrical resource

*Remove all the screws from the external casing.
*With a small screw driver pry the old switch off of the two plastic prongs that hold the old switch in place. This is a delicate process for you do not want to break of the plastic prongs.
*Detach the two electrical wires that connect to the old switch
*Reattach these two wires to the new switch.
Reinsert the new switch onto the plastic prongs
Re-insert all casing screws.
Task completed.

Did you find this story helpful?

Thanks for voting and helping fellow customers!

Tool Type:

Reciprocating Saw

Parts Used:

Plastite Screw - 330019-04

Clamshell Set - 613840-00

Carbon Brush With Wire Lead An - 387558-01

Repair Difficulty:

Easy

Time Spent Repairing:

Less than 15 minutes

Tools Used:

Screwdriver

handle broken.

Replaced clam shell and (1) brush.
Simple remove all screws with a T10 Torx driver.
Reuse switch. Installed brush. ( Attached wire on brush was broken when handle failed.)
Replace with new parts. SIMPLE

Did you find this story helpful?

Thanks for voting and helping fellow customers!

Tool Type:

Hedge Trimmer

Parts Used:

Plastite Screw - 330019-04

18-inch Blade - 152617-01

Repair Difficulty:

Easy

Time Spent Repairing:

15-30 minutes

Tools Used:

Screwdriver, Torx #5 screwdriver

The blade had become badly worn and chewed up. Could not be sharpened any further

Very simple -
Removed the top handle and blade protector. Removed screws and slipped off.
Removed screws holding the casing, and exposed the blade.
Removed screws holding blade to motor and then removed the blade.
(The blade is one inclusive unit)
Reattach the blade being certain to align with the rotor that moves the scissors back and forth. Had to adjust the blades to line up just right.
Reattach housing, I bought new screws for this.
Reattach the blade protector.
Reattach the handle.
Ready to go.

Did you find this story helpful?

Thanks for voting and helping fellow customers!

Tool Type:

Trimmer

Parts Used:

Plastite Screw - 330019-04

Blade - 243805-00

Screw - 681914-00

Repair Difficulty:

Easy

Time Spent Repairing:

Less than 15 minutes

Tools Used:

Screwdriver

Line blade fell off

Used screw to reattach lost blade on trimmer. Also replaced lost housing screw.

Did you find this story helpful?

Thanks for voting and helping fellow customers!

Tool Type:

Hedge Trimmer

Parts Used:

Plastite Screw - 330019-04

Bail Handle - 90546340

Repair Difficulty:

Easy

Time Spent Repairing:

Less than 15 minutes

Tools Used:

Screwdriver

Bail handle would not stay in place.

1. Removed the old bail handle (had some wear).
2. Installed the new one.

Did you find this story helpful?

Thanks for voting and helping fellow customers!

Reviews

Average Rating (out of 5):

3 Reviews

Click to filter by ratings:

5 stars

3

4 stars

0

3 stars

0

2 stars

0

1 stars

0

Sort by:

Highest Rating
Most Recent

< PREV

1

NEXT >

easy repair

All parts ordered were received together on time and perfect condition. ereplacementparts.com made it very easy, I highly recommend them, and look forward to future business. Thanks for making it easy and painless !!

Roger - January 30, 2023 Verified Purchase

Easy repair

Good condition

Guest - July 5, 2022 Verified Purchase

Perfect replacement

It was the correct part and worked.

Guest - June 18, 2019 Verified Purchase

Verified Purchase

eReplacementParts Team

Sort by:

Highest Rating
Most Recent

< PREV

1

NEXT >

Questions & Answers for Plastite Screw