Planer Blade Set 22-562
Part Number: 22-562
Order within the next 14 hours
and your part ships today!
and your part ships today!
Product Information
Specifications
| Compatible With: TP305, TP400LS, 22-565, 22-560 Width: 12-1/2" Material: HSS |
Description:
| This is a genuine set of two (2) steel planer blades. Those blades are sourced from original equipment manufacturer designed for use with Delta planers. These double edged high speed steel blades keeps a sharp edge longer. Planer's knives are machined to make very precise cuts. When your knife blades wear down, you won't get the level of precision you require. To replace the blades you will need a wrench. |
Frequently Purchased With
Compatibility
This part is compatible with the following machines:
Products Compatibility
This item works with the following types of products:
- • Planer
Repair Guides
![]()
Watch the Repair Video for
Planer Blade Set
Articles:
|
If your planer knives become dull, you will want to replace them--or flip them over to the second side. This article wil...
May 30, 2012
|
Questions & Answers for Planer Blade Set
No questions have been asked yet
Repair Instructions: Submitted by Customers Like You
4 of 4 people found this instruction helpful
Tool Type:
Planer
Parts Used:
Repair Difficulty:
Easy
Time Spent Repairing:
15-30 minutes
Tools Used:
, Allen wrench
Nicks in old blade from hitting a nail
I watched your you tube video on how to replace the knives in my planer. I did make a copy if someone else may need it.
https://www.youtube.com/watch?v=fKutXypDl3s
https://www.youtube.com/watch?v=fKutXypDl3s
Did you find this story helpful?
Thanks for voting and helping fellow customers!
2 of 2 people found this instruction helpful
Tool Type:
Planer
Parts Used:
Repair Difficulty:
Easy
Time Spent Repairing:
15-30 minutes
Tools Used:
Screwdriver, Allen wrench
Planer blades dull and chipped
I was reading one of the repair stories that the person wrote, that he watched the video you made for replacing the planer blades. I watched that video, and I had my planer going again. Thank you for the video.
Did you find this story helpful?
Thanks for voting and helping fellow customers!
1 of 1 people found this instruction helpful
Tool Type:
Planer
Parts Used:
Repair Difficulty:
Easy
Time Spent Repairing:
15-30 minutes
Tools Used:
Screwdriver, Wrench Set
Blades were dull
I watched your YouTube video on this repair. Thank you it made it easy.
Did you find this story helpful?
Thanks for voting and helping fellow customers!
1 of 1 people found this instruction helpful
Tool Type:
Planer
Parts Used:
Repair Difficulty:
Easy
Time Spent Repairing:
15-30 minutes
Tools Used:
, Allen Wrench
blades ( knives ) on wood planer were getting dull and had a nick in one blade
1. Placed planer on work bench.
2. Removed guard/hood/shield from planer. Screws for hood are removable by hand.
3. Used heavy duty Allen Wrench that came w/ planer to loosen 6 screws per blade. Do NOT remove screws or plate which holds blades in place. The plates on my Delta have springs which help lift the plates. Loosen plates enough to remove the blades. Blades are held in place with short metal pegs over which the blades can be lifted/removed. The blades are sharp so use the magnetized holder/remover that may have been part of the planer unit when purchased. Hand removal is an option as well. Either way, wear THIN, supple leather gloves during removal.
4. Install replacement blades. Tighten screws on plate holding the blades.
5. Reattach guard/hood/shield with hand tightened screws.
6. Test plane a scrap metal-free board 2 or more inches wide.
7. Smile as planer is stored and ready for next project.
Mark J.
Drummond, Wisconsin
2. Removed guard/hood/shield from planer. Screws for hood are removable by hand.
3. Used heavy duty Allen Wrench that came w/ planer to loosen 6 screws per blade. Do NOT remove screws or plate which holds blades in place. The plates on my Delta have springs which help lift the plates. Loosen plates enough to remove the blades. Blades are held in place with short metal pegs over which the blades can be lifted/removed. The blades are sharp so use the magnetized holder/remover that may have been part of the planer unit when purchased. Hand removal is an option as well. Either way, wear THIN, supple leather gloves during removal.
4. Install replacement blades. Tighten screws on plate holding the blades.
5. Reattach guard/hood/shield with hand tightened screws.
6. Test plane a scrap metal-free board 2 or more inches wide.
7. Smile as planer is stored and ready for next project.
Mark J.
Drummond, Wisconsin
Did you find this story helpful?
Thanks for voting and helping fellow customers!
1 of 1 people found this instruction helpful
Tool Type:
Planer
Parts Used:
Repair Difficulty:
Easy
Time Spent Repairing:
Less than 15 minutes
Tools Used:
Screwdriver, Wrench Set
Needed new blades
Took old blades off and put new blades on. That was the easy part. Until I found your web site I was having problems finding the right replacement blades. Your site was great. It made finding what I needed and ordering very easy. Thank you.
Did you find this story helpful?
Thanks for voting and helping fellow customers!
Tool Type:
Planer
Parts Used:
Repair Difficulty:
Easy
Time Spent Repairing:
Less than 15 minutes
Tools Used:
, Hex wrench
Blades dull and nicked
Remove old blades, install new, carefully
Did you find this story helpful?
Thanks for voting and helping fellow customers!
Tool Type:
Planer
Parts Used:
Repair Difficulty:
Easy
Time Spent Repairing:
Less than 15 minutes
Tools Used:
Blades were dull on planer
The planer has its own tools. Very simple procedure to replace blades.
Did you find this story helpful?
Thanks for voting and helping fellow customers!
Tool Type:
Planer
Parts Used:
Repair Difficulty:
Easy
Time Spent Repairing:
15-30 minutes
Tools Used:
, Wrench came with the planer
Blades were dull
Removed the old blades. Replaced with New ones. Easy fix
Did you find this story helpful?
Thanks for voting and helping fellow customers!
Tool Type:
Planer
Parts Used:
Repair Difficulty:
Easy
Time Spent Repairing:
15-30 minutes
Tools Used:
, Allen wrench
Dull blades
Loosened the allen nuts enough so I could take the old blades out .....put new ones in and tightened the allen nuts.
Did you find this story helpful?
Thanks for voting and helping fellow customers!
Tool Type:
Planer
Repair Difficulty:
Easy
Time Spent Repairing:
15-30 minutes
Tools Used:
Screwdriver, Wrench Set
Cutter head stopped turning and unit would not turn on.
1. Unplugged unit from power.
2. Remover 4 screws holding switch cover.
3. Removed switch from cover and snapped in new switch.
4. Removed wires from old switch and connected to new switch.
5. Installed switch and secured with the screws.
6. Removed brush covers and removed old brushes.
7. Inserted new brushes and replaced brush covers.
8. Removed old blades and installed new blades.
2. Remover 4 screws holding switch cover.
3. Removed switch from cover and snapped in new switch.
4. Removed wires from old switch and connected to new switch.
5. Installed switch and secured with the screws.
6. Removed brush covers and removed old brushes.
7. Inserted new brushes and replaced brush covers.
8. Removed old blades and installed new blades.
Did you find this story helpful?
Thanks for voting and helping fellow customers!
Reviews
7 Reviews
Average Rating (out of 5):
Click to filter by ratings:
5 stars
6
4 stars
1
3 stars
0
2 stars
0
1 stars
0
< PREV
- 1
Perfect experience.
The right part at an affordable price. Friendly customer service.
Guest -
March 4, 2023
Verified Purchase
Great part
I have a old planer blades not easy to find, but you had them.service was fast Thank You
Guest -
December 3, 2021
Verified Purchase
Right part
Received the right part with fast shipping , very satisfied.
Guest -
July 29, 2021
Verified Purchase
Easy to use website, with a great breakdown of parts.
Planer blade set was an exact fit!
John -
September 25, 2020
Verified Purchase
Easy to find and order.
Work as expected.
James -
April 22, 2020
Verified Purchase
good parts
fast shipping
Guest -
July 9, 2019
Verified Purchase
Good Replacement Part
As advertised and fits my planer. I would recommend that you specify that there are two blades in the set. This is not clear from the description.
Guest -
August 24, 2021
Verified Purchase
Verified Purchase
eReplacementParts Team
< PREV
- 1
Product Information
Repair Guides
![]()
Watch the Repair Video for
Planer Blade Set
Articles:
|
If your planer knives become dull, you will want to replace them--or flip them over to the second side. This article wil...
May 30, 2012
|
