Product Information
Compatibility
This part is compatible with the following machines:
Products Compatibility
This item works with the following types of products:
- • Miter Saw
- • Saw
Questions & Answers for Pivot Spoort
No questions have been asked yet
Repair Instructions: Submitted by Customers Like You
2 of 2 people found this instruction helpful
Tool Type:
Miter Saw
Parts Used:
Repair Difficulty:
Medium
Time Spent Repairing:
1-2 hours
Tools Used:
Screwdriver, Allen wrench
My miter fence broke - pivot spoort was broken at the laser holder.
Remove two screws from Miter fence and adjust to make square.
Pivot Spoort a lot of screws needed to be taken off to to get to it.
Instructions do not show the two set screws on back of the arm that have to be loosened to get the metal tube to release blade arm and spring.
It took a while to find them, once they are loose need to knock out the tube pipe with hammer.
The new part I had to re-drill the holes just a little to make the pipe fit.
Once that was completed everything when back into place replace all the screws level and plum blade and it is working great.
Pivot Spoort a lot of screws needed to be taken off to to get to it.
Instructions do not show the two set screws on back of the arm that have to be loosened to get the metal tube to release blade arm and spring.
It took a while to find them, once they are loose need to knock out the tube pipe with hammer.
The new part I had to re-drill the holes just a little to make the pipe fit.
Once that was completed everything when back into place replace all the screws level and plum blade and it is working great.
Did you find this story helpful?
Thanks for voting and helping fellow customers!
Product Information