Stand Mixer Retainer Pin - WP9707223:KitchenAid

Grid squares measure 1x1 inch

Watch The
Repair Video

Stand Mixer Retainer Pin WP9707223

Part Number: WP9707223

2 Reviews

Ships within 1 business day

Questions & Answers

Repair Instructions

*This part replaces obsolete part #: 9707223, C-240018-1, 2400181, 4169812, 4161950 and 240018-1.

Product Information

Description:

This is an Original Manufacturer Approved replacement part designed for use with KitchenAid Stand Mixers. This part works in conjunction with the worm and bevel gear. It is made out of Metal and it is Sold Individually.

To complete this repair you would need a Screwdriver.

• Remove the lid of the Mixer
• Clean all Grease and remove the Pin
• Install new Pin and pack with new Grease
• Install lid and test the unit

Warning: California's Proposition 65

Frequently Purchased With

Stand Mixer Ge..
$32.31

Mixer Worm Fol..
$18.76

Ring-retnr
$9.22

Gear
$46.29

Bearing
$8.29

Gasket
$13.30

Gasket
$20.99

Worm Gear
$35.17

Compatibility

This part is compatible with the following machines:

KitchenAid

Expand the 150+ compatible machines

Products Compatibility

This item works with the following types of products:

• Mixer

Questions & Answers for Stand Mixer Retainer Pin

Sort by

No questions have been asked yet

Repair Instructions: Submitted by Customers Like You

Tool Type:

Mixer

Parts Used:

Stand Mixer Retainer Pin - WP9707223

Mixer Worm Follower Gear - W11086780

Repair Difficulty:

Easy

Time Spent Repairing:

15-30 minutes

Tools Used:

Screwdriver, Snap ring pliers

Worn gear

Removed drive unit cover. Opened gearbox. Screwdriver required only. Removed snap ring retainer. Lifted off tapered upper gear. Removed retaining pin for worm follower gear. Lifted off gear. Replaced worm follower gear, Retaining pin, upper gear and snap ring. Repacked gearbox with grease. Replaced gearbox cover and unit cover. Turned mixer on. It worked. amazed wife. Thank you for your perfectly fitting parts. The job was a breeze. fixed a $400+ professional mixer for about $15.

Did you find this story helpful?

Thanks for voting and helping fellow customers!

Tool Type:

Mixer

Parts Used:

Ring-retnr - WP9703680

Stand Mixer Retainer Pin - WP9707223

Screw - WP3400814

Washer - W11084660

Repair Difficulty:

Easy

Time Spent Repairing:

30-60 minutes

Tools Used:

Screwdriver, Pliers

KitchenAid mixer

Removed shroud from mixer
Removed gear box housing
Replaced shear pin and snap ring
Reassembled

Did you find this story helpful?

Thanks for voting and helping fellow customers!

Tool Type:

Mixer

Parts Used:

Stand Mixer Retainer Pin - WP9707223

Repair Difficulty:

Easy

Time Spent Repairing:

Less than 15 minutes

Tools Used:

, Hammer

Attachments wouldn't stay on.

1. Inserted new pin.
2. Tapped it in with a hammer.

Did you find this story helpful?

Thanks for voting and helping fellow customers!

Tool Type:

Mixer

Parts Used:

Stand Mixer Retainer Pin - WP9707223

Planetary - WP9708753

Repair Difficulty:

Easy

Time Spent Repairing:

15-30 minutes

Tools Used:

Screwdriver, Drift pin

Shaft in planetary loose

Watch the video. Excellent, takes you straight through the repair.

Video > https://www.youtube.com/watch?v=VeCiivPt7hk

Did you find this story helpful?

Thanks for voting and helping fellow customers!

Tool Type:

Mixer

Parts Used:

Stand Mixer Gear Kit - W11192795

Stand Mixer Retainer Pin - WP9707223

Repair Difficulty:

Easy

Time Spent Repairing:

30-60 minutes

Tools Used:

Screwdriver, Pliers, Socket set

gears stripped.....

I found your you tube video on this repair. It was very informative and very easy to follow. Thank you.

https://www.youtube.com/watch?v=VeCiivPt7hk

Did you find this story helpful?

Thanks for voting and helping fellow customers!

Tool Type:

Mixer

Parts Used:

Stand Mixer Retainer Pin - WP9707223

Repair Difficulty:

Medium

Time Spent Repairing:

15-30 minutes

Tools Used:

Screwdriver, Hammer and small punch

Mixer bowl not secure came loose mixer hit bowl shear pin broke.

Easy repair, remove cover beauty ring and mixer. Remove pin at mixer and shear pin. Clean inspect and grease and install new gasket if needed/desired. Reassemble and clean exterior surface. Test operate at slowest speed, increase speed to ensure proper operation. Just follow diagram and take your time.

Did you find this story helpful?

Thanks for voting and helping fellow customers!

Reviews

Average Rating (out of 5):

2 Reviews

Click to filter by ratings:

5 stars

4 stars

3 stars

2 stars

1 stars

Sort by:

Highest Rating
Most Recent

< PREV

NEXT >

Quick and easy

Easy fix, did have a bit of difficulty getting it all in line but after it went right in and worded fine.

Ken - August 5, 2019 Verified Purchase

Part not what I needed

ereplacementparts did ship quickly, the website was fairly easy to use, and payment was easy. This item simply needs a slight adjustment to the description about its diameter and location of use on a kitchenaid stand mixer. I needed a smaller diameter pin which holds the worm gear on as mine snapped. I will start by saying, yes, I should have contacted this company prior to purchasing to ensure this was the correct part. However, I needed to order quickly. It was late at night on a weekend when I was ordering. I already knew I was not going to have time the next business day to deal with this. I ordered enough parts from various vendors to know I could fix it even if some parts were incorrect, broken, lost in transit, etc. and were returned later on. This retaining pin fits inside the outer spinner which holds attachments such as the dough hook. I was looking for the retaining pin which holds the worm gear in place. I did my best to research this but found no description or review for any retaining pin mentioning the worm gear, on any source I looked up. Granted, it was a short time period of research. I found one review on here saying they took apart the motor housing and used this pin inside the mixer. That was my best clue that this pin might be the correct one. Im not sure where that user used this pin if it were used inside the mixer but it is definitely too large to fit the worm gear assembly. I ended up using the entire worm gear assembly I had purchased from another source as I was unable to locate the pin needed. I would return the pin which cost me less than $4 but shipping to rerun it is more than I paid at $5.50! If ereplacementparts offers a free return I will return it and I would adjust/amend this review (or place a comment on this review), if possible, to reflect a higher rating due to great customer service. Unfortunately, that is a rare characteristic in most companies these days.

Guest - January 18, 2020 Verified Purchase

Verified Purchase

eReplacementParts Team

Sort by:

Highest Rating
Most Recent

< PREV

NEXT >

Product Information