eReplacementParts.com
877-346-4814
Porter Cable Parts
photo thumbnailphoto thumbnail360 degree photo thumbnail

Pin

Part Number: 908596
Porter CableBlack and Decker
Availability: 15 in stock
Price: $5.68
Order within the next 10 hours
and your part ships today!
Product Information
Manufacturer: Porter Cable, Black and Decker
Product Number: 908596
Classification: Part
Weight: 0.01 lbs.
Shipping: Ships Worldwide
Description:
It is a high-quality part that is supplied by the original manufacturer for Black and Decker and Porter Cable routers. The pin helps to engage the collet in the chuck. It provides an identical replacement for a missing or a faulty hardware that was installed on a new unit. One durable metal pin is included. To ensure the correct application of this component, check the owner's manual and the diagrams of your model. You may need a screwdriver and pliers to remove the old pin and secure the new one. Note, the spring and the spindle lock retainer are both sold separately.
Products Compatibility

This item works with the following types of products:

  • • Engine
  • • Router
Questions & Answers

No questions have been asked yet
Repair Instructions: Submitted by Customers Like You
3 of 3 people found this instruction helpful
Tool Type:
Router
Parts Used:
Pin - 908596
Repair Difficulty:
Medium
Time Spent Repairing:
15-30 minutes
Tools Used:
Screwdriver, Pliers
Broke the pin tightening the router nut to tight
Took outer cover of router off and very small pry bar to pull pin collar off. Put in new pin and tap collar back in place and reassemble
Did you find this story helpful?
Thanks for voting and helping fellow customers!
2 of 2 people found this instruction helpful
Tool Type:
Router
Parts Used:
Spring - 698709
Spindle Lock Retainer - 901287
Pin - 908596
Repair Difficulty:
Medium
Time Spent Repairing:
30-60 minutes
Tools Used:
Screwdriver, Pliers, Socket set, Impact wrench, torx screwdriver, rubber mallet, drive pin
Spindle lock broke off
1. Removed top cover.
2. Remove brushes.
3. Make reassembly mark on upper & lower motor housings.
4. Using rubber mallet, separate upper and lower motor housings.
5. Remove collet from chuck.
6. Grasping upper end of armature with a (heavy) gloved hand, used impact wrench to remove chuck.
7. Using rubber mallet, with router body clamped to workbench, removed armature.
8. Using a small drive pin and a hammer, removed broken spindle lock retainer, pin, and spring.
9. Using a small socket, drove the new retainer, pin, and spring into the lower motor housing.
10. Reassembled router in reverse order.
Did you find this story helpful?
Thanks for voting and helping fellow customers!
1 of 1 people found this instruction helpful
Tool Type:
Router
Parts Used:
Pin - 908596
Repair Difficulty:
Medium
Time Spent Repairing:
15-30 minutes
Tools Used:
Screwdriver, Socket set, Rubber mallet
Pin that holds shaft in place sheared off
I was able to grab the pin with a pair of vise grips and remove it. I then put the spring in and tapped the new pin and collar in place.
Did you find this story helpful?
Thanks for voting and helping fellow customers!
Tool Type:
Router
Parts Used:
Spring - 698709
Spindle Lock Retainer - 901287
Pin - 908596
Repair Difficulty:
Easy
Time Spent Repairing:
Less than 15 minutes
Tools Used:
Screwdriver, Adjustable Wrench
Spindle lock was weak and bent from use.
I went to ereplacementparts.Com and located the make and model of my router I reviewed the parts breakdown to locate the part number's. I ordered a spring just in case the old one tried to get away. Once the parts were in I located a youtube video that walked me through the process which took maybe 10 minutes. I had a few other power tools which required or will require some repair/replacement parts which I added to the order.
Did you find this story helpful?
Thanks for voting and helping fellow customers!
Discussion
Discussion for Pin - ( 908596 )
Discussion is closed. To ask our experts a question about a part, use the Q&A feature.
Question: Porter Cable 893 Type 1 Router

1325674

Porter Cable 893 Type 1 Router. The plunger pin that engages the collette to change bits on my router bent. I was able to saw the bent plunger pin to remove. Are there any manuals or videos showing how to replace the entire mechanism? I have ordered all relevant parts from the diagram... (21,23,56) Thanks, Brant.
Question: Router Repair

iatoolgy

need to replace shaft locking pin.
need description on how to replace it.
Question: Shaft Locking Pin

701903

I have two of these routers & bothe have the locking pins broken. How are the old ones removed and the new ones installed?

Thanks
Reviews
5
Average Rating (out of 5):
1 Reviews
Click to filter by ratings:
5 stars
1
4 stars
0
3 stars
0
2 stars
0
1 stars
0
  • Highest Rating
  • Most Recent
< PREV
  • 1
NEXT >
  • Quick Response Time
    Thank you, for the quick attention to sending my replacement part. Don
    Guest - November 29, 2019 Verified Purchase
    Verified Purchase
    eReplacementParts Team
    • Highest Rating
    • Most Recent
    < PREV
    • 1
    NEXT >
    Product Information
    Manufacturer: Porter Cable, Black and Decker
    Product Number: 908596
    Classification: Part
    Weight: 0.01 lbs.
    Shipping: Ships Worldwide
    Related Products
    eReplacementParts.com
    7036 South High Tech Dr.
    Midvale, UT 84047
    visa mastercard discover american express PayPal

    fancyboxy