Pilot Assembly - Natural Gas 20H2048
Part Number: 20H2048
Leaves our warehouse within
7 - 12 business days
7 - 12 business days
*This part replaces obsolete part #: 54219.
Product Information
Compatibility
This part is compatible with the following machines:
the 9 compatible machines
Products Compatibility
This item works with the following types of products:
- • Fireplace
- • Range
Repair Guides
![]()
Articles:
|
Having trouble getting your grill to light up? A common cause of this issue is a defective ignition switch. We'll sho...
November 08, 2012
|
Questions & Answers for Pilot Assembly - Natural Gas
No questions have been asked yet
Repair Instructions: Submitted by Customers Like You
Tool Type:
Fireplace
Repair Difficulty:
Medium
Time Spent Repairing:
1-2 hours
Tools Used:
Screwdriver, Pliers, Wrench Set, Adjustable Wrench, gas \\
Switchable gas valve didn't work right, gas leak at pilot, thermopile old
Close gas line valve, disconnected all the wires and gas lines, removed the whole platform from the fireplace (easier to work on than from underneath), removed the pilot assembly, removed the valve, cleaned everything, replaced the main valve (be sure to tape/dope the threads to prevent leaks), replaced the pilot assembly with the new, connected the pilot assembly lines and wires to the main valve, replaced the platform, reconnected the main gas line, turned the gas line on and checked for leaks, turned the pilot on, checked again for leaks, switched on/off a few times, reassembled the logs, cleaned glass and cleaned up. Let the fireplace warm up for at least 3 minutes as that is when the leak showed originally throwing flames to the side. Check again.
Did you find this story helpful?
Thanks for voting and helping fellow customers!
Tool Type:
Fireplace
Parts Used:
Repair Difficulty:
Easy
Time Spent Repairing:
30-60 minutes
Tools Used:
Wrench Set, Vacuum
Weak pilot light,hard starting fire place
I looked at how every thing was hooked up.
Found Replacement Parts on line.
Easy to order and price very good.
Used common sense to remove and replace old part.
Every thing worked out great the first time and I believe I save a lot of money not having a service tech to have to come over and do the simple repair.
Found Replacement Parts on line.
Easy to order and price very good.
Used common sense to remove and replace old part.
Every thing worked out great the first time and I believe I save a lot of money not having a service tech to have to come over and do the simple repair.
Did you find this story helpful?
Thanks for voting and helping fellow customers!
Product Information
Repair Guides
![]()
Articles:
|
Having trouble getting your grill to light up? A common cause of this issue is a defective ignition switch. We'll sho...
November 08, 2012
|
